First time eveer runing mftf I installed with composer with in a m2 2.3.5 and when I run the build I get this message:
mftf build:project
mftf files removed from filesystem.
codeception.yml applied to /var/www/html/dev/tests/acceptance/codeception.yml
functional.suite.yml configuration successfully applied.
functional.suite.yml applied to /var/www/html/dev/tests/acceptance/tests/functional.suite.yml
command.php copied to /var/www/html/dev/tests/acceptance/utils/command.php
.credentials.example successfully applied.
.env configuration successfully applied.
In Configuration.php line 212:
Output path is not defined by key "paths: output"
In BuildProjectCommand.php line 105:
The codecept build command failed unexpectedly. Please see the above output for more details.
Any ideas what can be ?
Related
My Spring application uses yandex-qatools/postgresql-embedded for executing Unit Tests.
While executing them, I am constantly getting the below error :
ERROR 75847 --- [ Test worker] r.y.q.embed.postgresql.PostgresProcess : Failed to read PID file (File '/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/db-content-4f285249-22ea-4625-b771-156adbf5851f/postmaster.pid' does not exist)
java.io.FileNotFoundException: File '/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/db-content-4f285249-22ea-4625-b771-156adbf5851f/postmaster.pid' does not exist
There is a warning popped up before the exception, but for now, let's ignore it.
WARN 75847 --- [ Test worker] r.y.q.embed.postgresql.PostgresProcess : Possibly failed to run initdb:
no data was returned by command ""/private/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/pgsql-10.3-1/pgsql/bin/postgres" -V"
The program "postgres" is needed by initdb but was not found in the
same directory as "/private/var/folders/sh/xr6l_7bs1_z9v1jfsyctc45w0000gp/T/postgresql-embed-b05c213f-7416-4200-a586-a3afb3263478/pgsql-10.3-1/pgsql/bin/initdb".
Check your installation.
I verified that no other instance of Postgress is running on my local machine using
ps -ef|grep postgres
Followed this thread as well, but it doesn't help.
Ran out of options to fix this, can anyone please suggest how to resolve it.
OSX version: 12.1
Thanks in advance
In my case, besides your error, I also could see the following error:
r.y.q.embed.postgresql.PostgresProcess : Possibly failed to run initdb:
initdb: invalid locale settings; check LANG and LC_* environment variables
This message led me to the solution. I just added the below environment properties to my .zshrc file:
export LANG="en_US.UTF-8"
export LC_ALL="en_US.UTF-8"
export LC_CTYPE="en_US.UTF-8"
I have a conflict between a number of install files.
I am getting the below error:
Transaction Summary
================================================================================
Install 612 Packages
Total size: 110 M Installed size: 403 M Downloading Packages: Running
transaction check Transaction check succeeded. Running transaction
test Error: Transaction check error: file /etc/iproute2/rt_protos
conflicts between attempted installs of
base-files-3.0.14-r89.nexbox_a95x_s905x and iproute2-4.14.1-r0.aarch64
file /etc/iproute2/rt_tables conflicts between attempted installs of
base-files-3.0.14-r89.nexbox_a95x_s905x and iproute2-4.14.1-r0.aarch64
file /etc/sysctl.conf conflicts between attempted installs of
base-files-3.0.14-r89.nexbox_a95x_s905x and procps-3.3.12-r0.aarch64
Error Summary
-------------
ERROR: amlogic-image-headless-sd-1.0-r0 do_rootfs: Function failed:
do_rootfs ERROR: Logfile of failure stored in:
/home/user/amlogic-bsp/build/tmp/work/nexbox_a95x_s905x-poky-linux/amlogic-image-headless-sd/1.0-r0/temp/log.do_rootfs.29264
ERROR: Task
(/home/user/amlogic-bsp/meta-meson/recipes-core/images/amlogic-image-headless-sd.bb:do_rootfs)
failed with exit code '1' NOTE: Tasks Summary: Attempted 3131 tasks of
which 3130 didn't need to be rerun and 1 failed.
I have seen somewhere that I should pin a file, but how do I do this? I can't find a tutorial or any reference to what that means.
I am also getting the below warning. Is this related?
WARNING: Layer meson should set LAYERSERIES_COMPAT_meson in its
conf/layer.conf file to list the core layer names it is compatible
with.
I'm new to OE coming over from OpenWRT.
For bitbake, I've added the layers for the packages below:
meta-openwrt:- OE/Yocto metadata layer for OpenWRT
superna9999/meta-meson:- Upstream Linux Amlogic Meson Yocto/OpenEmbedded Layer
And tried compiling the nexbox-a95x-s905x image
I think the problem is that /etc/iproute2/rt_protos is provided by base-files which is coming from meta-openwrt as well as from iproute2 package which is coming from other OE layers. its not clear for the image builder which one to use and hence the conflict
You can solve it via defining a iproute2_%.bbappend file in meta-openwrt where this file gets deleted from iproute2 package and preference is given to the one openwrt provides
do_install_append() {
rm -rf ${D}${sysconfdir}/iproute2/rt_protos
}
should help.
Currently I am trying to follow the MathWorks tutorial 1 to register a TE0720 with a TE0701-6 carrier board in Matlab. I followed the instructions, designed the block design and exported it as advised. Using the Matlab HDL Workflow Advisor I can follow unitl step 4.1 Create Project. Here, I get the following error message:
invalid command name "CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK"
while executing
"CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} CONFIG.PCW_IOPLL_CTRL_FBDIV {30} CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} CONFIG.PCW_IRQ_F2P_INTR {1} CONFIG..."
(procedure "create_root_design" line 49)
invoked from within
"create_root_design """
(file "vivado_custom_block_design.tcl" line 986)
while executing
"source vivado_custom_block_design.tcl"
(file "vivado_create_prj.tcl" line 15)
This is regarding the exported block design in the corresponding *.tlc file.
After deleting the line mentioned in the error, the error persists, but for the following line. This holds true until I deleted all lines following
CONFIG.PCW_IMPORT_BOARD_PRESET {preset}
It seems to me that once the preset for the board is imported, all following commands are seen as invalid. If I put this line in the end of the list though, I get the error
ERROR [Common 17-69] Command failed: Missing name/value pair in -dict argument.
If I remove this line, I get the error
ERROR [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master interface connection
ERROR [Common 17-39] 'validate_bd_design' failed due to earlier errors.
Is there a way to fix this or what is the problem here?
EDIT: I am using Vivado 2017.4 from the Vivado HL WebPACK. Could it be that there is a feature not available in this version for rebuilding the project as MATLAB intends to do?
EDIT 2: I started the complete tutorial fresh from scratch again and now I only get the error
ERROR: [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master Interface connection
when going throught the HDL Workflow Advisor. As far as I understand the issue, Vivado searches for something to connect the axi_interconnect to. But isn't this the interface port (DUT) as described later in the tutorial (end of step 2 in Register the custom reference design in HDL Workflow Advisor, where the compiled simulink model should be connected?
I did all that is specified in the tutorial - Doxygen Plugin.
Here is the sonarqube-4.5.1/conf/sonar.propeties file doxygen entries:
# Doxygen
sonar.doxygen.generateDocumentation=enable
sonar.doxygen.deploymentPath=D:\Downloads\sonarqube-4.5.1\web
sonar.doxygen.deploymentUrl=http://localhost:9000/sonar/documentation
The output of the sonarqube runner:
16:07:16.265 INFO - ANALYSIS SUCCESSFUL
16:07:16.266 DEBUG - Post-jobs : org.sonar.plugins.doxygen.DoxygenPostJob#28bda649
16:07:16.266 INFO - Executing post-job class org.sonar.plugins.doxygen.DoxygenPostJob
16:07:16.271 INFO - === SUPPRESS PREVIOUS GENERATION ===
16:07:16.395 INFO - === DOXYGEN EXECUTION ===
16:07:16.396 INFO - ### Generating configuration ###
16:07:16.427 INFO - ### Generating documentation ###
Also, in the specified \web folder there is a documentation folder which seems to contain the correct doxygen documentation output.
Yet I keep getting this Documentation Generation is disabled. message in the SonarQube web interface:
UPDATE
This is what my sonar-project.properties file contains now ― using a unix-style path:
#Doxygen
sonar.doxygen.generateDocumentation=enable
sonar.doxygen.deploymentPath=/Downloads/sonarqube-4.5.1/web
sonar.doxygen.deploymentUrl=http://localhost:9000/sonar/documentation
The output remains the same, same issue.
What do I need to do in order to see the documentation in the web server interface?
This seems to be a server linkage problem, because the documentation is being generated correctly, at this location: /Downloads/sonarqube-4.5.1/web/documentation.
I have also found this content:
core,true,sonar-core-plugin-4.5.1.jar|9289fc1067c31372c0b020aa01163087
emailnotifications,true,sonar-email-notifications-plugin-4.5.1.jar|bb35818e4a655a3ba2cff2afc65a296b
findbugs,false,sonar-findbugs-plugin-2.4.jar|bb0bf263ef1e0d56f569878732060cc9
java,false,sonar-java-plugin-2.4.jar|a105d018165ddeb2c0f5074100768660
cpd,true,sonar-cpd-plugin-4.5.1.jar|e11ff5066c9e2308036838510d87a6fe
dbcleaner,true,sonar-dbcleaner-plugin-4.5.1.jar|a444b3b4571791e1cde146ffa5132ee4
design,true,sonar-design-plugin-4.5.1.jar|0c6476994a44904307cfa8b8a08bbddd
doxygen,false,sonar-doxygen-plugin-0.1.jar|d86e1ab81c3ac34e6b31aa1da28d7f72
l10nen,true,sonar-l10n-en-plugin-4.5.1.jar|c21d53f67901cf6df3da1b4dd48a441b
in sonarqube-4.5.1\web\deploy\plugins\index.txt.
It looks like doxygen has a false associated with it. If I try to edit it (to true) and restart the server nothing changes. The file is overwritten at by the sonar-runner.
sonar.doxygen.generateDocumentation is a project property, not a server property. You have to set it in your "sonar-project.properties" file if you run your analysis with the SonarQube Runner or in your pom.xml file if you run the analysis with Maven.
Here is how I solved this:
Stopped the sonar-qube server.
Replaced the old sonar-doxygen-plugin-0.1.jar, from /Downloads/sonarqube-4.5.1/extensions/plugins, with the updated doxygen plugin from here https://github.com/SonarCommunity/sonar-doxygen/releases/download/1.0/sonar-doxygen-plugin-1.0-SNAPSHOT.jar.
Commented out the old configuration entries for doxygen from the project sonar-project.properties file. And replaced them with the follwoing entries:
sonar.doxygen.url=http://localhost:8000/
sonar.doxygen.enable=true
Used a simple python script to post the documentation html on that server (http://localhost:8000/).
Restarted the sonar-qube server.
Run the sonar-runner.bat again.
The documentation is in its place now.
I'm trying to run pig locally, installed using homebrew, to test a script. However, I get the following error when I attempt to run a simple dump from the interactive prompt pig -x local:
2012-07-16 23:20:40,447 [Thread-7] INFO org.apache.pig.backend.hadoop.executionengine.util.MapRedUtil - Total input paths (combined) to process : 1
[Fatal Error] :63:85: Character reference "" is an invalid XML character.
2012-07-16 23:20:40,688 [Thread-7] FATAL org.apache.hadoop.conf.Configuration - error parsing conf file: org.xml.sax.SAXParseException: Character reference "" is an invalid XML character.
The same load/dump works fine on Elastic MapReduce.
I can't find any XML config files, and I've tried with both version 0.9.2 and 0.10.0
What am I missing?
Edit: Just checked a direct download (vs. homebrew) and it doesn't seem to work either
You should check that your Hadoop configuration files have correct configuration data.
Have a look in your hadoop/conf directory.
Have a look inside:
hdfs-site.xml
mapred-site.xml
core-site.xml
Finally worked out what the problem was. I ended up having to use dtruss -p on the pig/java process. This revealed a temporary directory and dynamically generated xml files. Once the temporary directory was discovered, it all fell quickly into place.
It was picking up the proxy excludes from my network connections, which had, as far as I can tell,  (http://www.fileformat.info/info/unicode/char/02/index.htm) embedded in it. How this invalid value came to be in my network preferences in the first place, I haven't the faintest clue.
The value was then being pulled into dynamically generated files, for example /tmp/hadoop-vertis/mapred/staging/vertis-1005847898/.staging/job_local_0001/job.xml.
The offending lines:
<property><name>ftp.nonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>
<property><name>socksNonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>
<property><name>http.nonProxyHosts</name><value>localhost|*.localhost|127.0.0.1|h|*.h</value></property>