How to keep one record in specific column and make other record value 0 in group by clause in PostgreSQL? - postgresql

I have a set of data like this
The Result should look Like this
My Query
SELECT max(pi.pi_serial) AS proforma_invoice_id,
max(mo.manufacturing_order_master_id) AS manufacturing_order_master_id,
max(pi.amount_in_local_currency) AS sales_value,
FROM proforma_invoice pi
JOIN schema_order_map som ON pi.pi_serial = som.pi_id
LEFT JOIN manufacturing_order_master mo ON som.mo_id = mo.manufacturing_order_master_id
WHERE to_date(pi.proforma_invoice_date, 'DD/MM/YYYY') BETWEEN to_date('01/03/2021', 'DD/MM/YYYY') AND to_date('19/04/2021', 'DD/MM/YYYY')
AND pi.pi_serial in (9221,
9299)
GROUP BY mo.manufacturing_order_master_id,
pi.pi_serial
ORDER BY pi.pi_serial


Option 1: Create a "Running Total" field in Crystal Reports to sum up only one "sales_value" per "proforma_invoice_id".
Option 2: Add a helper column to your Postgresql query like so:
case
when row_number()
over (partition by proforma_invoice_id
order by manufacturing_order_master_id)
= 1
then sales_value
else 0
end
as sales_value
I prepared this SQLFiddle with an example for you (and would of course like to encourage you to do the same for your next db query related question on SO, too :-)

Related

Use postgresql query results to form another query

I am trying to select from one table using the select result from another table. I can run this in two queries but would like to optimize it into just one.
First query.. Select ids where matching other id
select id from lookuptable where paid = '547'
This results in something like this
6316352
6316353
6318409
6318410
6320468
6320469
6320470
6322526
6322527
6324586
6324587
6326648
I would like to then use this result to make another selection. I can do it manually like below. Note, there could be many rows with these values so I've been using a IN statement
select * from "othertable" where id in (6316352,6316353,6318409,6318410,6320468,6320469,6320470,6322526,6322527,6324586,6324587,6326648);

select
ot.*
from
"othertable" as ot
join
lookuptable as lt
on
ot.id = lt.id
where
lt.paid = '547'

The IN operator supports not just value lists but also subqueries, so you can literally write
select * from "othertable" where id in (select id from lookuptable where paid = '547');

how to filter data array_agg from postgresql

I have view at postgres db from this query
SELECT order_product.order_id,
array_agg(order_product.product_id) AS itemset
FROM order_product
GROUP BY order_product.order_id
ORDER BY order_product.order_id;
and this is the structure look like:
And the question is, how can U filter data at (itemset) just show where the value is more than 1 (example: don't show = {8}, just show the value when containing 2 data or more like this = {8,10})

Use the having() clause:
SELECT op.order_id,
array_agg(op.product_id) AS itemset
FROM order_product op
GROUP BY op.order_id
HAVING count(*) > 1 --<< here
ORDER BY op.order_id;

oracle: grouping on merged columns

I have a 2 tables FIRST
id,rl_no,adm_date,fees
1,123456,14-11-10,100
2,987654,10-11-12,30
3,4343,14-11-17,20
and SECOND
id,rollno,fare,type
1,123456,20,bs
5,634452,1000,bs
3,123456,900,bs
4,123456,700,bs
My requirement is twofold,
1, i first need to get all columns from both tables with common rl_no. So i used:
SELECT a.ID,a.rl_no,a.adm_date,a.fees,b.rollno,b.fare,b.type FROM FIRST a
INNER JOIN
SECOND b ON a.rl_no = b.rollno
The output is like this:
id,rl_no,adm_date,fees,rollno,fare,type
1,123456,14-11-10,100,123456,20,bs
1,123456,10-11-12,100,123456,900,bs
1,123456,14-11-17,100,123456,700,bs
2,Next i wanted to get the sum(fare) of those rollno that were common between the 2 tables and also whose fare >= fees from FIRST table group by rollno and id.
My query is:
SELECT x.ID,x.rl_no,,x.adm_date,x.fees,x.rollno,x.type,sum(x.fare) as "fare" from (SELECT a.ID,a.rl_no,a.adm_date,a.fees,b.rollno,b.fare,b.type FROM FIRST a
INNER JOIN
SECOND b ON a.rl_no = b.rollno) x, FIRST y
WHERE x.rollno = y.rl_no AND x.fare >= y.fees AND x.type IS NOT NULL GROUP BY x.rollno,x.ID ;
But this is throwing in exceptions.
ORA-00979: not a GROUP BY expression
00979. 00000 - "not a GROUP BY expression"
The expected output will be like this:
id,rollno,adm_date,fare,type
1,123456,14-11-10,1620,bs
So could someone care to show an oracle newbie what i'm doing wrong here?

It looks like there's a couple different problems here;
Firstly, you're trying to group by an x.ID column which doesn't exist; it looks like you'll want to add ID to the selected columns in your sub-query.
Secondly, when aggregating with GROUP BY, all selected columns need to be either listed in the GROUP BY statement or aggregated. If you're grouping by rollno and ID, what do you want to have happen to all the extra values for adm_date, fees, and type? Are those always going to be the same for each distinct rollno and ID pair?
If so, simply add them to the GROUP BY statement, ie,
GROUP BY adm_date, fees, type, rollno, ID
If not, you'll need to work out exactly how you want to select which one to be output; If you've got output like your example (adding in an ID column here)
ID,adm_date,fees,rollno,fare,type
1,14-11-10,100,123456,20,bs
1,10-11-12,100,123456,900,bs
1,14-11-17,100,123456,700,bs
Call that result set 'a'. If I run;
SELECT a.ID, a.rollno, SUM(a.fare) as total_fare
FROM a
GROUP BY a.ID, a.rollno
Then the result will be a single row;
ID,rollno,total_fare
1,123456,1620
So, if you also select the adm_date, fees, and type columns, oracle has no idea what you mean to do with them. You're not using them for grouping, and you're not telling oracle how you want to pick which one to use.
You could do something like
SELECT a.ID,
FIRST(a.adm_date) as first_adm_date,
FIRST(a.fees) as first_fees,
a.rollno,
SUM(a.fare) as total_fare,
FIRST(a.type) as first_type
FROM a
GROUP BY a.ID, a.rollno
Which would give the result;
ID,first_adm_date,first_fees,rollno,total_fare,first_type
1,14-11-10,100,123456,1620,bs
I'm not sure if that's what you mean to do though.

How to convert maximo SQL for Crystal Reporting

How do I change this to work in crystal?
SELECT jpnum in (select jpnum from jobplan minus select jpnum from jobtask where jptask = '1')

There are a few ways to structure this query and I'm not completely sure of the structure of your tables, but this query should get you on the way to a command.
SELECT
JOBPLAN.JPNUM,
MIN(ISNULL(JOBTASK.JPTASK,0))
FROM
JOBPLAN
LEFT OUTER JOIN
JOBTASK
ON JOBPLAN.JPNUM = JOBTASK.JPNUM
GROUP BY
JOBPLAN.JPNUM
HAVING
MIN(ISNULL(JOBTASK.JPTASK,0)) <> 1

Tableau - Calculating average where date is less than value from another data source

I am trying to calculate the average of a column in Tableau, except the problem is I am trying to use a single date value (based on filter) from another data source to only calculate the average where the exam date is <= the filtered date value from the other source.
Note: Parameters will not work for me here, since new date values are being added constantly to the set.
I have tried many different approaches, but the simplest was trying to use a calculated field that pulls in the filtered exam date from the other data source.
It successfully can pull the filtered date, but the formula does not work as expected. 2 versions of the calculation are below:
IF DATE(ATTR([Exam Date])) <= DATE(ATTR([Averages (Tableau Test Scores)].[Updated])) THEN AVG([Raw Score]) END
IF DATEDIFF('day', DATE(ATTR([Exam Date])), DATE(ATTR([Averages (Tableau Test Scores)].[Updated]))) > 1 THEN AVG([Raw Score]) END
Basically, I am looking for the equivalent of this in SQL Server:
SELECT AVG([Raw Score]) WHERE ExamDate <= (Filtered Exam Date)
Below a workbook that shows an example of what I am trying to accomplish. Currently it returns all blanks, likely due to the many-to-one comparison I am trying to use in my calculation.
Any feedback is greatly appreciated!
Tableau Test Exam Workbook

I was able to solve this by using Custom SQL to join the tables together and calculate the average based on my conditions, to get the column results I wanted.
Would still be great to have this ability directly in Tableau, but whatever gets the job done.
Edit:
SELECT
[AcademicYear]
,[Discipline]
--Get the number of student takers
,COUNT([Id]) AS [Students (N)]
--Get the average of the Raw Score
,CAST(AVG(RawScore) AS DECIMAL(10,2)) AS [School Mean]
--Get the number of failures based on an "adjusted score" column
,COUNT([AdjustedScore] < 70 THEN 1 END) AS [School Failures]
--This is the column used as the cutoff point for including scores
,[Average_Update].[Updated]
FROM [dbo].[Average] [Average]
FULL OUTER JOIN [dbo].[Average_Update] [Average_Update] ON ([Average_Update].[Id] = [Average].UpdateDateId)
--The meat of joining data for accurate calculations
FULL OUTER JOIN (
SELECT DISTINCT S.[Id], S.[LastName], S.[FirstName], S.[ExamDate], S.[RawScoreStandard], S.[RawScorePercent], S.[AdjustedScore], S.[Subject], P.[Id] AS PeriodId
FROM [StudentScore] S
FULL OUTER JOIN
(
--Get only the 1st attempt
SELECT DISTINCT [NBOMEId], S2.[Subject], MIN([ExamDate]) AS ExamDate
FROM [StudentScore] S2
GROUP BY [NBOMEId],S2.[Subject]
) B
ON S.[NBOMEId] = B.[NBOMEId] AND S.[Subject] = B.[Subject] AND S.[ExamDate] = B.[ExamDate]
--Group in "Exam Periods" based on the list of periods w/ start & end dates in another table.
FULL OUTER JOIN [ExamPeriod] P
ON S.[ExamDate] = P.PeriodStart AND S.[ExamDate] <= P.PeriodEnd
WHERE S.[Subject] = B.[Subject]
GROUP BY P.[Id], S.[Subject], S.[ExamDate], S.[RawScoreStandard], S.[RawScorePercent], S.[AdjustedScore], S.[NBOMEId], S.[NBOMELastName], S.[NBOMEFirstName], S.[SecondYrTake]) [StudentScore]
ON
([StudentScore].PeriodId = [Average_Update].ExamPeriodId
AND [StudentScore].Subject = [Average].Subject
AND [StudentScore].[ExamDate] <= [Average_Update].[Updated])
--End meat
--Joins to pull in relevant data for normalized tables
FULL OUTER JOIN [dbo].[Student] [Student] ON ([StudentScore].[NBOMEId] = [Student].[NBOMEId])
INNER JOIN [dbo].[ExamPeriod] [ExamPeriod] ON ([Average_Update].ExamPeriodId = [ExamPeriod].[Id])
INNER JOIN [dbo].[AcademicYear] [AcademicYear] ON ([ExamPeriod].[AcademicYearId] = [AcademicYear].[Id])
--This will pull only the latest update entry for every academic year.
WHERE [Updated] IN (
SELECT DISTINCT MAX([Updated]) AS MaxDate
FROM [Average_Update]
GROUP BY[ExamPeriodId])
GROUP BY [AcademicYear].[AcademicYearText], [Average].[Subject], [Average_Update].[Updated],
ORDER BY [AcademicYear].[AcademicYearText], [Average_Update].[Updated], [Average].[Subject]

I couldn't download your file to test with your data, but try reversing the order of taking the average ie
average(IF DATE(ATTR([Exam Date])) <= DATE(ATTR([Averages (Tableau Test Scores)].[Updated]) then [Raw Score]) END)
as written, I believe you'll be averaging the data before returning it from the if statement, whereas you want to return the data, then average it.