rgeo point near MULTILINESTRING - postgresql

Having a geometry column wkb_geometry, srid 4326 that is a MULTILINESTRING I would like to determine which of these records are within a predetermined distance (say 5000m) of a geometry object POINT
while the following method allows to determine if a polygon contains a point
def self.containing_latlon(lat,lon, polygon)
ewkb = EWKB.generate(RGeo::Geographic.simple_mercator_factory.point(lon, lat).projection)
where("ST_Intersects(polygon, ST_GeomFromEWKB(E'\\\\x#{ewkb}'))")
end
ST_Intersects is clearly not an option, as it applies to "any portion of space then they intersect".
I have not found documentation in order to determine if a line is within X distance of a point. But possibly the question is reversed? Should the question not be is the point within a polygon defined by the MULTILINESTRING and a buffer.
How would the above method need to be modified in order to execute this?

Use ST_DWithin instead.
For distances using meters cast the parameters to geography, e.g. 5km:
SELECT * FROM t
WHERE ST_DWithin('POINT(7.00 51.82)'::geography,geom::geography,5000);
If you're happy with the unit of measurement of your SRS, just stick to `geometry
SELECT * FROM t
WHERE ST_DWithin('POINT(7.00 51.82)'::geometry,geom,42);
The :: after the WKT literals is a postgres syntax to cast data types. But as it is customary in postgres, there are many ways to do the same thing. The following example casts a WKT literal into a geometry using different techniques:
SELECT
CAST('SRID=4326;POINT(1 2)' AS geometry),
'SRID=4326;POINT(1 2)'::geometry,
ST_GeomFromText('SRID=4326;POINT(1 2)'),
ST_SetSRID(ST_MakePoint(1,2),4326);
-[ RECORD 1 ]---+---------------------------------------------------
geometry | 0101000020E6100000000000000000F03F0000000000000040
geometry | 0101000020E6100000000000000000F03F0000000000000040
st_geomfromtext | 0101000020E6100000000000000000F03F0000000000000040
st_setsrid | 0101000020E6100000000000000000F03F0000000000000040
Further reading: Getting all Buildings in range of 5 miles from specified coordinates

Related

Postgres: How to calculate distance for a set of geography points?

I'm using Postgres v13.
I couldn't find a clear example of how to achieve this basic calculation. I'm totally confused about how to handle geometry and geography points.
I have a table that stores points in the format geography(Point, 4326) alongside their timestamp.
I need to obtain the total distance in meters between timestamps A and B, and I need it to be super specific using spherical calculations. To be clear, there may be N points.
So far I've been using this query, but the distance is way off for long distances and I don't understand if there is any difference in creating a line using geometry points or geography points:
SELECT ST_Length(ST_MakeLine(lh.position::geometry order by report_time), TRUE)
FROM location_history AS lh
WHERE lh.device_id = 1
AND lh.report_time BETWEEN '2022-10-10T13:25:00.000Z' AND '2022-10-11T13:25:00.000Z'
GROUP BY lh.device_id;
Does this query make sense? ST_MakeLine only accepts geometry points and confuses me. Is there another way of creating a line with geography points?
ST_Distance is used in every example I could find, but it just compares 2 points!
Thanks!

how to find ou lat long with 2KM radius using Postgres

I have a postgres table with lat-long values stored as point (Geometric data type). I am interested to query all rows with 2km radius for the given lat-long values. Also, I am expecting for a suitable datatype for this, currently I stored these values as POINT. But on some investigation, I found to use POLYGON here. But even though I couldn't able to achieve the results what expected.
Can any one point me the exact query with suitable GTS functions to achieve this
https://postgis.net/workshops/postgis-intro/spatial_relationships.html
example explanation:
SELECT name
FROM nyc_streets
WHERE ST_DWithin(
geom,
ST_GeomFromText('POINT(583571 4506714)',26918),
10
);
The first "geom" refer to the column name in nyc_streets.
ST_GeomFromText: transform text to geom. 26918 is srid.
10 : 10 meters.
To query geometries within a certain radius you might wanna use ST_DWithin. In order to use it with metres you have to either use a SRS that has metre as unit, such as EPSG:26918, or use geography instead of geometry:
SELECT *
FROM mytable
WHERE ST_DWithin(ST_MakePoint(1,2)::geography, -- 1=long / 2=lat
geom::geography, -- casting the 'geometry' to 'geography'
2000); -- 2km radius
In case you're dealing with different geometry types, such as polygon or linestring, you might wanna use ST_GeogFromText instead of ST_MakePoint:
SELECT *
FROM mytable
WHERE ST_DWithin(ST_GeogFromText('POINT(1 2)'),
geom::geography,2000);
SELECT *
FROM mytable
WHERE ST_DWithin(ST_GeogFromText('POLYGON((1 1,2 2,3 3,1 1))'),
geom::geography,2000);
Keep in mind that transforming a geometry is much more than just change its SRID - check ST_Transform.
Further reading
Getting all Buildings in range of 5 miles from specified coordinates
How is postgis treating coordinates sent with different SRID

PostGIS convert meters to degree using epsg 5186

I have a few questions about geometry and geography in PostGIS.
I am currently using PostGIS and Postgresql.
Most of my spatial data is from Korea which is basically latitude and longitude.
For testing, I have created two tables with the same latitude and longitude data but different data types, one for geography with SRID 4326 and the other for geometry with SRID 5186.
create table geometry_stores
(
id serial primary key,
location geometry(POINT, 5186) not null
);
create table geography_stores
(
id serial primary key,
location geography(POINT, 4326) not null
);
You can find more details of EPSG 5186 on this link https://epsg.io/5186
Here is a list of question I have got:
PostGIS has this method
ST_DWithin(geometry g1, geometry g2, double precision distance_of_srid);
is distance_of_srid a unit of EPSG? Is there any way I can convert meters (e.g. 1km) to distance_of_srid with EPSG 5186?
I understand that geography calculation measures the distances between points as true paths over a sphere while geometry calculation measures the distances between points as true paths over a Cartesian plane. Then if I give exactly the same distance to the following queries, they are supposed to yield different results or same results? because my understanding is that geometry with SRID 5186 is already projected with distortion of earth, then they should yield the same results?
select *
from geography_stores
where st_dwithin(location, st_setsrid(st_point(126.970769, 37.555479), 4326), same_distance_meter)
select *
from geometry_stores
where st_dwithin(location, st_setsrid(st_point(126.970769, 37.555479), 5186), same_distance_degree)
When I calculate distance on the geometry table with the following query, it gives me a degree, not meters. Is there any way I can convert this degree to meters with consideration of distortion of the earth?
select st_distance(location, st_setsrid(st_point(126.970769, 37.555479), 5186))
from geometry_stores
where id = 1;
I have tried with this query but got some error of Only lon/lat coordinate systems are supported in geography. Where: SQL function "st_distancesphere" during inlining
select st_distancesphere(location, st_setsrid(st_point(126.970769, 37.555479), 5186))
from geometry_stores
where id = 1;
I have read documents at the PostGIS website and some questions in StackOverflow but still got those three questions. Thank you guys for your help.
------------------------------- UPDATED -----------------------------------------
The column for my spatial data is geometry(POINT, 5186) so the table definition would be as following. Note that it is not geometry(POINT, 4326) not to convert it to geometry(POINT, 5186) on calculation. Should I store my data in geometry(POINT, 4326) and convert it on calculation?
create table geometry_stores
(
id serial primary key,
location geometry(POINT, 5186) not null
);
I executed following query and got results as follows:
select st_distance(st_setsrid(st_makepoint(126.808183, 37.463557), 4326)::geography,
st_setsrid(st_makepoint(126.970769, 37.555479), 4326)::geography);
st_distance
--------------
17627.3138509
select st_distance(st_setsrid(st_makepoint(126.808183, 37.463557), 5186)::geometry,
st_setsrid(st_makepoint(126.970769, 37.555479), 5186)::geometry)
st_distance
--------------
0.186772218169622
It seems that the second's query gives me degree while the first one gives me meters. Am I doing something wrong in my query, please?
For st_within, I populated 3M data in geometry_stores table and the spatial data spread over at least 10km. I executed the following query.
select *
from users
where st_dwithin(location, st_setsrid(st_point(126.970769, 37.555479), 5186), 0.001)
This query gives me 158 rows and geometry viewer displays as per picture below.
Let's execute the same query with distance 1 not 0.0001
select *
from users
where st_dwithin(location, st_setsrid(st_point(126.970769, 37.555479), 5186), 1)
This query gives me 32792923 rows which is all data in the table.
Considering that the spatial data spread over at least 10km, it seems that the st_within query calculates the distance between two geometries with a unit (degeree) of EPSG5186 not meters. Then, I'd like to know if I can convert meters to the unit (degree) of EPSG5186 because I'd like to query with meters, not degree which I don't know how far a unit (degree) of EPSG5186 is.
Is distance_of_srid a unit of EPSG?
Yes. Distances using geometry type geometries are calculated using the unit of measurement from the corresponding Spatial Reference System.
Is there any way I can convert meters (e.g. 1km) to distance_of_srid with EPSG 5186?
According to the documentation, the unit of EPSG:5186 is already metres, so you don't have to convert anything. Bur also keep in mind that distances using geography type geometries are also calculated using metres, e.g.
SELECT
ST_Distance(
'SRID=4326;POINT(127.49 36.65)'::geometry,
'SRID=4326;POINT(128.06 36.43)'::geometry) AS geometry_distance,
ST_Distance(
'SRID=4326;POINT(127.49 36.65)'::geography,
'SRID=4326;POINT(128.06 36.43)'::geography) AS geography_distance
;
geometry_distance | geography_distance
-------------------+--------------------
0.610982814815612 | 56578.57823391
(1 Zeile)
Then if I give exactly the same distance to the following queries, they are supposed to yield different results or same results? because my understanding is that geometry with SRID 5186 is already projected with distortion of earth, then they should yield the same results?
The results will differ. They might have the same unit of measurement, but they aren't projected on the same surface. The following example transforms the coordinates from 4326 to 5186 and calculates the distance:
SELECT
ST_Distance(
'SRID=4326;POINT(127.49 36.65)'::geography,
'SRID=4326;POINT(128.06 36.43)'::geography),
ST_Distance(
ST_Transform('SRID=4326;POINT(127.49 36.65)'::geometry,5186),
ST_Transform('SRID=4326;POINT(128.06 36.43)'::geometry,5186));
st_distance | st_distance
----------------+------------------
56578.57823391 | 56582.0899018353
(1 Zeile)
When I calculate distance on the geometry table with the following query, it gives me a degree, not meters. Is there any way I can convert this degree to meters with consideration of distortion of the earth?
Isn't the data type geography what you're looking for? As the documentation says:
Regardless which spatial reference system you use, the units returned by the measurement (ST_Distance, ST_Length, ST_Perimeter, ST_Area) and for input of ST_DWithin are in meters.
Just for fun, the following query calculates the distance between two points explicitly defining the 4326 spheroid, using ST_DistanceSpheroid, and casting the coordinates from geometry to geography, which basically does the same:
SELECT
ST_DistanceSpheroid(
'POINT(127.49 36.65)',
'POINT(128.06 36.43)',
'SPHEROID["WGS 84",6378137,298.257223563]'),
ST_Distance(
'SRID=4326;POINT(127.49 36.65)'::geography,
'SRID=4326;POINT(128.06 36.43)'::geography);
st_distancespheroid | st_distance
---------------------+----------------
56578.5782339123 | 56578.57823391
Regarding when to use geometry or geography the documentation says:
"The type you choose should be conditioned on the expected working area of the application you are building. Will your data span the globe or a large continental area, or is it local to a state, county or municipality?"
Things to consider:
use case covers small area: stick to geometry and use a SRS that better suits your area.
use case covers large areas (countries/continents): use geography - although it might be a bit slower.
Do the functions you wanna use support geography? Most PostGIS functions do not support it! Check this matrix for more details. If the functions you wanna use do not support geography, you have no other choice but to use geometry ;-) Since your use case mostly covers Korea, I see no problem in using EPSG 5186.
EDIT: Regarding the question Update.
You cannot simply change the SRID of geometries to get it transformed into another reference system! What you've done was to get a WGS84 coordinate pairs and simply exchange its SRID, which is not the way it works. You have to always use ST_Transform for that. Take a look what the coordinates look like after you apply it:
SELECT
ST_AsText(ST_Transform('SRID=4326;POINT(126.808183 37.463557)'::geometry,5186));
st_astext
------------------------------------------
POINT(183030.248454493 540476.713582621)
(1 Zeile)
It means that POINT(183030.248454493 540476.713582621) and POINT(126.808183 37.463557) are the same coordinate pairs, but in different reference systems. The following query will make it clear that both geography and 5186 return results in metres:
SELECT
--Transforming from 4326 to 5186 and calculating the distance
ST_Distance(
ST_Transform('SRID=4326;POINT(126.808183 37.463557)'::geometry, 5186),
ST_Transform('SRID=4326;POINT(126.970769 37.555479)'::geometry, 5186)),
-- Distance using geography
ST_Distance(
'SRID=4326;POINT(126.808183 37.463557)'::geography,
'SRID=4326;POINT(126.970769 37.555479)'::geography);
st_distance | st_distance
------------------+---------------
17627.3383377316 | 17627.3138509

Use ST_DWithin to query pairs of geometry points within 400 miles in a PostgreSQL table

I have a table called h2combines in Postgres that has two points-geometry fields: geom1 and geom2, and some other fields. I want to select all records that geom1 and gemo2 are with 400 miles. I tried this:
SELECT * from h2combines WHERE ST_DWithin(geom1, geom2, 643738);
However, it returned all rows. Seems I misunderstand something here.
Thanks!
Welcome to SO.
To get the distance in meters/miles you have to cast your geometries to geography, e.g.
SELECT * FROM h2combines
WHERE ST_DWithin(geom1::geography, geom2::geography, 643737.6);
Keep in mind that calculations using GEOMETRY and GEOGRAPHY are made differently, and so are their results. GEOGRAPHY calculates the coordinates over an spherical surface (which can be much slower than GEOMETRY) and uses meters as unit of measurement, while GEOMETRY uses a planar projection and uses the SRS unit.

How to configure PostgreSQL with Postgis to calculate distances

I know that it might be dumb question, but I'm searching for some time and can't find proper answer.
I have PostgreSQL database with PostGIS installed. In one table I have entries with lon lat (let's assume that columns are place, lon, lat).
What should I add to this table or/and what procedure I can use, to be able to count distance between those places in meters.
I've read that it is necessary to know SRID of a place to be able to count distance. Is it possible to not know/use it and still be able to count distance in meters basing only on lon lat?
Short answer:
Just convert your x,y values on the fly using ST_MakePoint (mind the overhead!) and calculate the distance from a given point, the default SRS will be WGS84:
SELECT ST_Distance(ST_MakePoint(lon,lat)::GEOGRAPHY,
ST_MakePoint(23.73,37.99)::GEOGRAPHY) FROM places;
Using GEOGRAPHY you will get the result in meters, while using GEOMETRY will give it in degrees. Of course, knowing the SRS of coordinate pairs is imperative for calculating distances, but if you have control of the data quality and the coordinates are consistent (in this case, omitting the SRS), there is not much to worry about. It will start getting tricky if you're planing to perform operations using external data, from which you're also unaware of the SRS and it might differ from yours.
Long answer:
Well, if you're using PostGIS you shouldn't be using x,y in separated columns in the first place. You can easily add a geometry / geography column doing something like this.
This is your table ...
CREATE TABLE places (place TEXT, lon NUMERIC, lat NUMERIC);
Containing the following data ..
INSERT INTO places VALUES ('Budva',18.84,42.92),
('Ohrid',20.80,41.14);
Here is how you add a geography type column:
ALTER TABLE places ADD COLUMN geo GEOGRAPHY;
Once your column is added, this is how you convert your coordinates to geography / geometry and update your table:
UPDATE places SET geo = ST_MakePoint(lon,lat);
To compute the distance you just need to use the function ST_Distance, as follows (distance in meters):
SELECT ST_Distance(geo,ST_MakePoint(23.73,37.99)) FROM places;
st_distance
-----------------
686560.16822422
430876.07368955
(2 Zeilen)
If you have your location parameter in WKT, you can also use:
SELECT ST_Distance(geo,'POINT(23.73 37.99)') FROM places;
st_distance
-----------------
686560.16822422
430876.07368955
(2 Zeilen)