I am trying to execute the lanes which are declared in the Fastfile.ios files, but i am getting below error. Could any one please help me out.
An error occurred while executing the error block:
Could not find action, lane or variable 'current_action'. Check out the documentation for more details: https://docs.fastlane.tools/actions
Related
I am running a test case in my Test Rigor suite.It is getting passed but I can see some errors in the Test steps that were executed.
Error: JS SEVERE: 52:61 Uncaught TypeError: Cannot read properties of undefined (reading 'toString')
Issue is that Test Rigor is passing all these test cases.I want it to fail the test case in case any such errors are found.Is there any way to do this?
The fail with "error" command will fail a script. To do it within javascript,
try:
testRigor.execute('fail with "error"');
For javascript errors detected on a page, testcases will note those errors by changing the color of the screenshot, however, they will not fail the test as they are exposed as "minor" errors. There is currently no way to detect these errors. You could put in an enhancement request.
Currently I am trying to follow the MathWorks tutorial 1 to register a TE0720 with a TE0701-6 carrier board in Matlab. I followed the instructions, designed the block design and exported it as advised. Using the Matlab HDL Workflow Advisor I can follow unitl step 4.1 Create Project. Here, I get the following error message:
invalid command name "CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK"
while executing
"CONFIG.PCW_INCLUDE_ACP_TRANS_CHECK {0} CONFIG.PCW_IOPLL_CTRL_FBDIV {30} CONFIG.PCW_IO_IO_PLL_FREQMHZ {1000.000} CONFIG.PCW_IRQ_F2P_INTR {1} CONFIG..."
(procedure "create_root_design" line 49)
invoked from within
"create_root_design """
(file "vivado_custom_block_design.tcl" line 986)
while executing
"source vivado_custom_block_design.tcl"
(file "vivado_create_prj.tcl" line 15)
This is regarding the exported block design in the corresponding *.tlc file.
After deleting the line mentioned in the error, the error persists, but for the following line. This holds true until I deleted all lines following
CONFIG.PCW_IMPORT_BOARD_PRESET {preset}
It seems to me that once the preset for the board is imported, all following commands are seen as invalid. If I put this line in the end of the list though, I get the error
ERROR [Common 17-69] Command failed: Missing name/value pair in -dict argument.
If I remove this line, I get the error
ERROR [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master interface connection
ERROR [Common 17-39] 'validate_bd_design' failed due to earlier errors.
Is there a way to fix this or what is the problem here?
EDIT: I am using Vivado 2017.4 from the Vivado HL WebPACK. Could it be that there is a feature not available in this version for rebuilding the project as MATLAB intends to do?
EDIT 2: I started the complete tutorial fresh from scratch again and now I only get the error
ERROR: [BD 41-1811] The interconnect </axi_interconnect_0> is missing a valid master Interface connection
when going throught the HDL Workflow Advisor. As far as I understand the issue, Vivado searches for something to connect the axi_interconnect to. But isn't this the interface port (DUT) as described later in the tutorial (end of step 2 in Register the custom reference design in HDL Workflow Advisor, where the compiled simulink model should be connected?
Baseline update on endeca is failing. Please find the logs below:
INFO: Finished pushing content to dgraph.
INFO: [AuthoringMDEXHost] Starting shell utility 'rmdir_dgraph-input-old'.
INFO: [LiveMDEXHostA] Starting shell utility 'cleanDir_local-dgraph-input'.
INFO: [LiveMDEXHostA] Starting shell utility 'rmdir_dgraph-input-old'.
SEVERE: Utility 'rmdir_dgraph-input-old' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host LiveMDEXHostA.
Occurred while executing line 7 of valid BeanShell script:
AuthoringDgraphCluster.copyIndexToDgraphServers();
AuthoringDgraphCluster.applyIndex();
LiveDgraphCluster.cleanDirs();
LiveDgraphCluster.copyIndexToDgraphServers();
LiveDgraphCluster.applyIndex();
SEVERE: Error executing valid BeanShell script.
Occurred while executing line 19 of valid BeanShell script:
Dgidx.run();
// distribute index, update Dgraphs
DistributeIndexAndApply.run();
// Upload the generated dimension values to Workbench
WorkbenchManager.cleanDirs();
SEVERE: Caught an exception while invoking method 'run' on object 'BaselineUpdate'. Releasing locks.
Caused by java.lang.reflect.InvocationTargetException
sun.reflect.NativeMethodAccessorImpl invoke0 - null
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.AppControlException
com.endeca.soleng.eac.toolkit.script.Script runBeanShellScript - Error executing valid BeanShell script.
Caused by com.endeca.soleng.eac.toolkit.exception.EacComponentControlException
com.endeca.soleng.eac.toolkit.utility.Utility run - Utility 'rmdir_dgraph-input-old' failed. Refer to utility logs in [ENDECA_CONF]/logs/shell on host LiveMDEXHostA.
INFO: Released lock 'update_lock'.
Has anyone seen this type of error before? Please let me know the potential solution. Also Baseline update is taking 2 to 3 hours and then it's failing, it's annoying.
Thanks!
Check logs under
endeca/PlatformServices/workspace/logs/shell
There should be a log named like appName.rmdir_dgraph-input-old.log
with more info about the error.
Probably a non existing folder is trying to be removed or something like that.
If this is the case just create the folder that the utility is trying to remove and execute baseline again.
Whenever I try to run a simulink(.slx)-file I get this errors in my MATLAB command window:
Error using connector.ensureServiceOn
Error starting MATLAB Connector. Please check that port 31515 is available.
Error in slmsgviewer
Error in slmsgviewer/PersistentInstance
Error in slmsgviewer.processRecord
Error in slsfnagctlr
Error in slsfnagctlr
Error in slsfnagctlr
Error in slsfnagctlr
The simulink file does open but when I try to run, it just says "ready" without doing anything.
The solution that I found from people suffering the same problem was to add a new environment variable:
variable name: "JAVA_TOOL_OPTION"
variable Value: "-Djava.net.preferIPv4Stack=true"
After adding this environment variable and restarting I tried it again but I got the same error.
I also tried "JAVA_TOOL_OPTIONS" and "_JAVA_OPTIONS" with the same value but nothing seems to work.
Is there another way to get rid of these errors?
try to install jdk-7u79-windows-x64, it solved my problem!
I am developing a talend job with tFTPGet to fetch a file.
When i try to run the job in to test out the code, a error is reported . How do i see what the exact error is to fix this?
You need to use the error message of the TFTPGet component in a user code component:
The code of TJava will be executed only if the TFTPGet failed, you can use this line of code:
System.out.println(((String)globalMap.get("tFTPGet_1_ERROR_MESSAGE")));
Then you will see the error message in your console.