I need to implement an action that has to collected anything a user says.
So I use the "Free form text" as "Type" for the slot filling.
This implementation works, however when the user have a pause of 1 second (maybe less of 1 second), google assistant stop to record what user says.
Is it possibile to increment the default timeout of 1 second, for example to 3 or 4 seconds?
The platform does not have a way to customize the timeout for any sort of speech input.
Related
The "Assembler" should stop working for 2 hours after 10 assemblies are done.
How can I achieve that?
There are so many ways to do this depending on what it means to stop working and what the implications are for the incoming parts.. but here's one option
create a resourcePool called Machine, this will be used along with the technicians:
on the "on exit" action of the assembler do this (I use 9 instead of 10 because the out.count() doesn't count until the agent is completely out, so when it counts 9, it means that you have produced 10)
if(self.out.count()==9){
machine.set_capacity(0);
create_MyDynamicEvent(2, HOUR);
}
In your dynamice event (that you have to create) you will add the following code:
machine.set_capacity(1);
A second option is to have a variable countAssembler count the number of items produced... then
on exit you write countAssembler++;
on enter delay you write the following:
if(countAssembler==10){
self.suspend(agent);
create_MyDynamicEvent(2, HOUR,agent);
}
on the dynamic event you write:
assembler.resume(agent);
Don't forget to add the parameter needed in the dynamic event:
Create a variable called countAssembler of type int. Increment this as agents pass through the assembler. Also create a variable called assemblerStopTime. You also record the assembler stop time with assemblerStopTime=time()
Place a selectOutputOut block before the and let them in if countAssembler value is less than 10. Otherwise send to a Wait block.
Now, to maintain the FIFO rule, in the first selectOutputOut condition, you need to check also if there is any agent in the wait block and if the current time - assemblerStopTime is greater than 2. If there is, you free it and send to the assembler with wait.free(0) function. And send the current agent to wait. You also need to reset the countAssembler to zero.
I'm trying to create an agent statechart where a transition should happen every day at 4 pm (except weekends).
I have already tried:
1. a conditional transition (condition: getHourOfDay() == 16)
2: A timeout transition that will "reinsert" my agent into the chart every 1 s and check if time = 16.
My code is still not running, does anyone have any idea how to solve it?
This is my statechart view. Customer is a single resource that is supposed to "get" the products out of my stock everyday at 4pm. It is supposed to happen in the "Active" state.
I have set a timeout transition (from Active-Active) that runs every 1s.
Inside my "Active" state in the "entrance action" i wrote my code to check if it is 4 pm and run my action if so.
I thought since i set a timeout transition it would check my condition every 1s, but apparently it is not working.
Your agent does not enter the Active state via an internal transition.
Redraw the transition to actually go out of the Active state and then enter it again as below:
Don't use condition-based transitions, for performance reasons. In your case, it also never triggers because it is only evaluated when something happens in the model. Incidentally, that is not the case at 4pm.
re your timeout approach: Why would you "reinsert" your agent into its own statechart? Not sure I understand...
Why not set up a schedule or event with your recurrence requirement and make it send a message to the statechart: stateChart.fireEvent("trigger!");. In your statechart, add a message-based transition that waits for this message. This will work.
Be careful to understand the difference between the Statechart.fireEvent() and the Statechart.receiveMessage() functions, though.
PS: and agree with Felipe: please start using SOF the way it is meant, i.e. also mark replies as solved. It helps us but also future users to quickly find solutions :-) cheers
I am trying to seek user feedback at the end of a google action session using actions sdk.
As per the Actions documentation (https://developers.google.com/actions/assistant/conversation-exits), I have set the cancel intent
"conversations" : {
...
"inDialogIntents": [
{
"name": "actions.intent.CANCEL"
},
...
and in my functions code I am calling a SimpleResponse as below:
app.intent('actions.intent.CANCEL', (conv, input) => {
conv.close(new SimpleResponse({
speech: 'Kindly rate between 1 and 5,
text: 'Rate between 1 and 5'
}));
});
When the user says goodbye, the above code gets called. The speech is heard and text displayed but the conversation immediately exits with an earcon.
The documentation mentions that the system will wait for 2 seconds before exiting but it seems to do so immediately. Is there a way to get this working? Thanks
It's not quite clear to me what you'd like to achieve. First of all, as long as you're using conv.close() method, you are ending the conversation. If you want to keep the mic open, you need to use conv.ask() method. But I'm not sure id you can use conv.ask() with actions.intent.CANCEL, because that event is there to get the user out, not to keep the conversation going. But I'm not %100 sure, you need to try it.
If what you're trying to achieve is something like this:
User: cancel
System: How would you rate our interaction?
User: Good.
earcon
Then, in my humble opinion, you probably shouldn't (and as I said you probably can't) do it. The docs clearly state that the purpose for custom exit behavior is:
to cleanup your fulfillment logic and respond to the user one last time.
Also, the docs doesn't say the system will wait for the user response for 2 second. It says the execution of the request (the time out for your fulfillment) is 2 seconds. Plus; if a user is canceling mid-conversation, chances are that the interaction was unsuccessful anyway. I'd rather create feedback dialog turns that are connected to the fallback intents and happy path(s).
Still, try to use conv.ask() instead and let me know if that works. (And please let me know by commenting.) Either case, though, I'd consider getting the feedback some other way.
I want to detect a missing event in a data stream ( e.g. detect a customer request that has not been responded within 1 hour of its reception. )
Here, I want to detect the "Response" event and make an alert.
I tried using tick tuple by setting TOPOLOGY_TICK_TUPLE_FREQ_SECS but it is configured at a bolt level and might come after 15th minute of getting a customer request.
#Override public Map getComponentConfiguration() {
Config conf = new Config();
conf.put(Config.TOPOLOGY_TICK_TUPLE_FREQ_SECS, 1800);
return conf; }
^ this doesn't work.
Let me know in comments if any other information is required. Thanks in advance for the help.
This might help http://storm.apache.org/releases/1.0.3/Windowing.html
you can define 5 mins windows and check the status of last window events and alert based on what is received
or create an intermediate bolt which maintains these windows and sends the normal alert tuples(instead of tick tuple) in case of timeouts
I am publishing actions for events to the timeline ("Dave attended...", "Dave is attending...") with start_time = {now}; end_time = {time of the event}
My intent is that the action will render as "Dave is attending..." up until the event takes place, and then "Dave attended..." once the event is over.
It seems like when I perform multiple actions, the tense is correctly chosen as "is attending". (This is the UI where the large app icon is used, and multiple actions are listed next to it.)
However, when I've only performed one action, FB renders uses the past tense verb. (This is the inline UI, using the small app icon inline with the action)
Am I doing something conceptually wrong, or is this just a bug in FB's rendering? Has anyone else seen this and found a fix/workaround?
Reposting my answer from here as it may also be useful to you.
If your start time is now, the easiest way is to specify "expires_in" as a POST variable. This is an optional parameter and will denote the duration (in seconds) for which your action should remain in the present tense.
From the documentation:
expires_in (integer)
The number of seconds before this action is considered “old”. From the
time the action until expires_in seconds have elapsed, the action is
considered “present tense”, and afterwards, it is considered “past
tense”.
expires_in is a shortcut for specifying end_time when it’s
more convenient to provide a delta in seconds between when an action
started and when it ends. For example, when a user starts watching a
movie, when you post a watch action, expires_in should be the length
of the movie in seconds.