After passing a complex Codename One project from Ant to Maven with the appropriate tool (https://www.codenameone.com/blog/migrating-your-project-to-maven.html), in Netbeans 12.3 I have two problems:
when in the log there is the stack trace of a crash, clicking on the line of code (reported in the log) does not open the related Java file and automatically scroll to the line in question (with Ant it worked).
Netbeans reports me non-existent errors, even if it compiles correctly: these errors are all related to code that refers to libraries (before, with Ant, these errors were not reported).
Thanks for the suggestions
I have good news, I solved both issues.
About the fake errors like in the screenshot, right-clicking on the "common" module of the Codename One project, there was an item "Resolve Project Problems" that I hadn't noticed before. The error was:
Your project has dependencies that are not resolved locally. Code
completion in the IDE will not include classes from these dependencies
or their transitive dependencies (unless they are among the open
projects). Please download the dependencies, or install them manually,
if not available remotely.
The artifacts are:
xxx:mainclass-cn1-websockets:jar:common:1.0-SNAPSHOT
xxx:mainclass-Device:jar:common:1.0-SNAPSHOT
xxx:mainclass-NativeLogsReader:jar:common:1.0-SNAPSHOT
xxx:mainclass-SMSActivation:jar:common:1.0-SNAPSHOT
xxx:mainclass-GoogleMaps:jar:common:1.0-SNAPSHOT
xxx:mainclass-CameraKitCodenameOne:jar:common:1.0-SNAPSHOT
xxx:mainclass-VideoOptimizerCN1Lib:jar:common:1.0-SNAPSHOT
As you can see, all the errors refer to cn1libs. By clicking on "Resolve", Netbeans automatically resolved this issue and the false errors (like the one in the screenshot) disappeared.
This partially solved also the first problem, related to the fact that Netbeans did not open the java file related to the error line reported in the log. I specified "partially solved" because the problem is solved only by taking care, before pressing "Run", to left-click in the Projects view on the main module of the application (otherwise the "Run" will refer to the "common" module, with various side effects). Ultimately, however, without the use of "Resolve Project Problems" this partial solution would not have worked. I'm sure of this because I ran some tests on the exact same error before and after.
UPDATE
Removing nbactions.xml from the common package prevents the use of "Run" with that package, avoiding the described problem.
Related
I don't understand exactly what is the way of working with maven projects in Eclipse.
The problems I have are often with projects I download from github. If I set the project myself it usually work, so I think I'm doing something different from the majority of people.
I'll try to detail a specific case:
I clone a repo, let's say: https://github.com/spring-guides/tut-spring-boot-oauth2
In Eclipse I import "existing maven project"
The project has a "Maven nature" as indicated by M on the folder icon
I try to run java class with main from Eclipse. First strange thins is that the "Run As" menu doesn't have "Run as a Java application"
I have to configure the configuration manually. Now it runs, but strange things happens, like I can't edit the file as the "content assist" throw errors instead of giving the normal assists.
I notice that the project has no "source folder". So my first instinct is to add a Java nature or select src as source folder
So I add Java nature to the project. This is a disaster. It can compile anymore as it can find packages. All classes have errors. I try to play around setting source folders on /src or /src/main/java. Sometimes I fix the errors but I can't run (and now I have run as Java application) but when I run it can't load the class
So in the end, I'm a bit confused and I don't know if I explained clearly what I'm doing.
I think I would like to know in a simple way how people are doing it, rather than trying to correct my steps as I'm probably creating a mess myself.
Any help or suggestion welcome.
I'm using the last version of eclipse. I don't know which other tool's versions are relevant.
P.S. I also refresh,restart,clean rebuild the project often after touching things...but it doesn't get better
Maven is a build (management) tool. Simply spoken, its task is to create a JAR that can be used as a dependency/library by other projects or when running java -jar ....
Running a project's code isn't part of it (apart from unit and integration tests code and by using non-default plugins for special situations). Running code is part of Eclipse (or any other IDE) with its Run Configurations.
I've created a Play Framework program via Typesafe Activator (so it follows the template exactly).
I used sbteclipse-plugin version 3.0.0 to create an Eclipse project and imported that into Scala IDE 4.0.0. These are all the latest versions at the time of writing.
The Scala IDE definitely seems to support the Play Framework. It has syntax highlighting for the custom formats, including the routing file and templates. Yet, it doesn't seem to be able to find the views from the controllers. In particular, the call to views.html.index triggers an error: "object index is not a member of package views.html".
I tried enabling refreshing using native hooks or pooling as detailed here, but it had no affect.
I should note that while the code has been compiled in the command line (with activator ~run), it hasn't been compiled in Scala IDE, since I don't know how to (it doesn't seem to be documented anywhere).
What can I do to get rid of these false errors?
EDIT: After running activator clean ~run, I have another error: The project cannot be built until build path errors are resolved. There's no further details on what these build path errors are.
Update: Just upgrade to sbteclipse version 5.1.0 and everything should work out of the box. Also make sure you follow the Play documentation on how to set up Eclipse/ScalaIDE.
This is a known bug in sbteclipse, which probably will be fixed soon.
For now, you can add the following line to your build.sbt:
EclipseKeys.createSrc := EclipseCreateSrc.All
Kill the SBT console and run sbt eclipse again. That should add the following line to the .classpath file within your project folder as a workaround:
<classpathentry kind="src" path="target/scala-2.11/twirl/main"/>
Refresh your Eclipse project to pick up the change.
I had the same issue, also with Scala IDE 4.0.0 . I followed mkurz instuctions and they worked like a charm. But instead of changing the .classpath file in the project folder manually I used Eclipse interface:
In the top menu of the main window, click on Project and then on Properties.
In the Properties window, click on Java Build Path option (options list is on the left)
In the Source tab, click on Add Folder... button.
In the Source Folder Selection window, choose the target/scala-2.11/twirl/main folder, so it is included in the compilation path. Click Ok button.
Click Ok in the Properties window.
Now the project should compile just fine :) . With that I was able to finish the play setup example in Scala IDE website
I tried #mkurz solution first, but also ran into the same error as #matt. I became frustrated that I could not generate the eclipse project without having to go to the Eclipse project properties to manually fix the build errors. After some investigation, I discovered the solution that removed all errors entirely. Add this your build.sbt:
unmanagedSourceDirectories in Compile <+= twirlCompileTemplates.target
Or if that does not work for you, you could also use:
unmanagedSourceDirectories in Compile <+= target.zipWith(scalaBinaryVersion) { (b,v) => b / s"scala-$v/twirl/main" }
Good bye, build errors!
I got the same error message.
Are you using java8 as jre in eclipse?
After switching back from java8 to java7, everything worked fine again.
If, after following Mkurz' instructions (adding EclipseKeys.CreateSrc... ), your problems are not solved, click on Project -> Properties -> Java Build Path. Look at the source folders tab.
You may find a duplicate file folder named .../src_managed/main (Thanks Matt). If so, close the project. Remove ONE of the two ../src_managed/main entries from the .classpath file (located in the base of the activator/SBT project directory). Reopen and clean the project and you should be good to go.
For me, it turned out that installed JRE in the Scala IDE was openjdk, changed it to Oracle Java 8 and it worked.
Introduction
I have spend a lot of time to fix this bug
In our application we have a lot of generated code by cxf and jaxb which produces tons of warnings. We use the maven-build-helper plugin to add this code to our projects automatically.
By adding this enhancement, eclipse JDT enabled the possibility to set the javac -nowarn flag for specific source folders. Unluckily, by updating the maven project the flag gets lost. There are a few threads on SO where users got bugged by bug.
What I have tried so far
So i came up with a clever solution, javac has a nowarn flag. I set it to my maven-compiler-plugin and specified the directory. My maven build was fine, but my eclipse build wasn't. My research told me, that eclipse jdt does only use the maven-compiler-plugin source and target version. So my next step was to try to configure the EclipseCompiler, but this is not possible, because there is no possibility to add custom compiler Arguments in eclipse JDT.
Next Step. Inside of the .classpath file, eclipse JDT adds an ignore_optional_problems attribute for each ignored path. By updating the maven project inside of eclipse, this entry gets lost. So i started to write a maven "ignore-source-folder" plugin which should add the missing attribute. To run the plugin each time eclipse starts a build, i also created a m2e connector to refresh the .classpath file and everything should be fine.
By testing my plugin with my connector i realized, it works, but only 70% of the repetitions.
What happened?
Every time eclipse m2e/Jdt starts a new build, all classpath entries will be removed and populated again. When my maven plugin gets triggered by eclipse, a race condition starts.
So I started to analyze the code of jdt and m2e jdt. The ignore_optional_problems flag gets only once set manually inside of the patch which was provided to JDT and isn't stored somewhere else. By triggering a new build via m2e-jdt this information gets lost.
How to fix this problem
To fix this problem, some element has to be added or extended in jdt which contains all ignored folders. If a new build gets triggered and the classpath file gets newly generated by m2e-jdt this element should be checked for ignored paths. ClasspathEntryDescriptor seems to be a good place for it.
My problem
I checked out jdt and m2e jdt, but i have tons of errors inside of my IDE and i have no idea how to start. And even if I fix the code, I have no idea how to build and test it. I think my effort will be to high and we talk about 20 or 30 simple lines of code.
I am afraid if I add my results to the filed bug at eclipse, no one will care about it.
So, is there any developer able and willing to help me for this tiny job?
You need to "fix" the M2E's JDT project configurator. Probably somewhere in the m2e-core project. So, your change should obtain some kind of configuration flag from the project pom and create corresponding classpath entries for JDT.
My coworker is attempting to install STS, groovy/grails onto his PC. He has imported a TFS project which grabbed the source fine. However he is getting lots of build errors that appear to be the result of the Grails Dependencies library being empty. He cleared .ivy2 cache and restarted STS which repopulated the .ivy2 cache. However, the dependencies are still empty under the build path (right click project, build path, libraries tab, expand Grails Dependencies).
He might be able to add them manually, but that doesn't seem like the appropriate solution and may cause issues down the line. Any ideas?
Select "Grails Tools -> Refresh dependencies" from the context menu of your project. Then the dependencies are added.
I had the same problem. It turned out that an undeclared class was causing the problem. One of the STS engineers responded that "if the command "grails compile" fails, then STS will not have the dependency data. This data is produced as a side effect of the compile command. So it doesn't get generated if the compile fails."
Basically, the entire Grails Dependency issue was a red herring. If you look at the Error Log (Window->View->Error Log or Window->View->Other: General->Error Log) check to see there is an undefined that is stopping the grails compile.
I am working on an RCP project based on eclipse. It has been working fine but recently I thought I'd upgrade it to use a new eclipse version (3.2 -> 3.5).
After a bit of trouble, it was running on the new platform. Then I did something. Don't know what. The end result is that I'm now getting a classpath error when one of my plugins (A) tries to access a class in one of the dependent plugins (B) (also one of mine).
As far as I can see, Plugin A has Plugin B in its' dependency list and the compiler shows no errors. To test, I created a new Plugin C with one class and accessed the class from Plugin A. That works fine.
Does anyone have any hints for troubleshooting such issues? A checklist of settings to check? I've been struggling with this for hours and getting nowhere! Particularly frustrating as it was working until I changed something!
Thanks
Update
I should also say that the project is quite old and uses the plugin.xml and not the manifest. Could this be a problem? Is there a way to upgrade?
Some ideas:
Clean-and-build every project (maybe after a restart of Eclipse)
Check, whether the required packages are also exported
Check the Error log, maybe there is some unloadable plug-in, etc.
Check the Run configuration, whether every required plug-in is present there
If the problem does not happen in a Runtime workbench, but in an Exported RCP app, then check whether you compile the project with the same settings during export than in Eclipse
I hope, something helps about these.
You can try the following in your run configuration:
In the Main tab check Clear (workspace) under Workspace Data
In the Configuration tab check clear the configuration area before launching under Configuration Area
This helps me every time I encounter some strange ClassNotFound errors.
If I understand you correctly you have no compiler errors but when you run you get class not found exceptions? You could try PDE Tools > Update Classpath from the project's context menu to see if you declared any dependencies outside of the MANIFEST.MF file, which would result in compiling code that fails at runtime.
I developed for RCP quite a long ago, but if I'm not wrong, since 3.4 or 3.5 you have to declare in the plugin configration which packages/classes are exported for dependent plugins and which are not.
This is unlike the old convention of using 'internal' in the package to mark non-exported packages.
Since you have plugin.xml from very old version of eclipse, it might be the problem, as exported resources from one plugin to another were not enforced in Eclipse RCP 3.2.
One more complement, hope it helps.
Open plugin.xml, check "build" tab, see how "binary build" are configured. It affects which files will compiled and exported.
See binary build here : http://help.eclipse.org/indigo/index.jsp?topic=%2Forg.eclipse.pde.doc.user%2Fguide%2Ftools%2Feditors%2Fmanifest_editor%2Fbuild.htm