I'm trying to simulate my Movsense 2.0.0 based project in Visual Studio 2017 and I want to supply ECG data from a CSV file.
According to documentation I put in my solution's root folder an ecg.csv file that looks like this
LoopingTimestamp:120000
Timestamp,/Meas/ECG/125
57540,-130
57548,-17
57556,348
57564,-83
57572,-829
57580,212
57588,3881
57596,8108
57604,10067
57612,9471
...
but all I get are debug console errors saying
SimulatorDataSource::getData. Unknown columnName: /Meas/ECG/{RequiredSampleRate}
Is my CSV file wrongly formatted or is there a problem with the simulator?
I have no problems simulating other sensors' data (like HR) with a CSV file.
If you look at the simulator debug output you see what is the column name it tries to load. From the log:
09:49:16 initFromCSVFile. file not found: ecg.csv
09:49:16 cwd: C:\Users\lipponep\dev\Projects\movesense\_build-simu
09:49:16 SimulatorDataSource::addColumn: /Meas/ECG/{RequiredSampleRate}
So the actual column name is not "/Meas/ECG/125" but
"/Meas/ECG/{RequiredSampleRate}" (<= do not fill in the sample rate)
Full disclosure: I work for the Movesense team
Related
I have a HU submodels FMU that is not running in a Simulink model.
I use Matlab2020b, FMIkit2.7 and the FMU created with Amesim 2019.1.
This is the error message:
AME_LIC_CACHE_INIT set to 100
Impossible to open file 'pV/pV_FrontAxle_Variant1.txt'.
Impossible to open file 'pV/pV_FrontAxle_Variant1.txt'.
Fatal error in FXA001 instance 1.
Terminating the program.
Simcenter Amesim model: initialization failed.
Failed to exit initialization mode
Failed to exit initialization mode. The FMU crashed (exception code: UNKOWN_EXEPTION_CODE).
I give 2 parameter in .txt file for the FXA001. It is worked in older versions of the model.
I tried to give the full path, copy the files to the folder where the model was and still not found.
Has anyone ever had such an issue?
Thank you!
Based on my experience, this issue might happen if the two text files do not have a header mentioning the Amesim table format they use.
For example for a so-called “1D” table:
#Table format: 1D
Otherwise the files may not be embedded properly when exporting the FMU.
I have a password protected zip file with 3 folders PFC, STA and SYS. The zip file when loaded for the first time reads all the text files in the PFC folder and display the data onto the screen. I perform some operations on the screeen which generates new files and they are added into the STA and SYS folders and the same initial zip file is updated.
However, when I try to load the same zip file which now should have the all the initial files and folders along with the newly created files in it, it gives me a Wrong CRC Value error. I dont know what am I doing wrong.
We have tried to reproduce the issue by preparing a sample with your scenario. But, we are facing another issue related to password which we will fix in our upcoming release. The sample can be downloaded from the below link .
Sample link : https://www.syncfusion.com/downloads/support/directtrac/general/ze/Password-1299200154.zip
Kindly modify the sample to reproduce the “CRC value error” issue and update us along with input documents. It will help us to analyze further on this and provide you a solution at earliest.
Note : I work for Syncfusion.
You can send your sample or confidential information in mail to, support#syncfusion.com
Regards,
Mohan.
I trained a neural network model on Digits and it seemed to run fine there.
Then i exported the trained model files and copied them into a different system running the standard caffe web demo.
I hoped to just be able to plug those files in and have them run in Caffe but i am getting an error.
Specifically I copied my model into bvlc_reference_caffenet.caffemodel, the deploy.prototxt into deploy.prototxt, and the mean.binaryproto into the ilsvrc_2012_mean.npy file.
However when I try to run it , it appears to not like the format of the mean.binaryproto file as indicated by the error message:
IOError: Failed to interpret file '/home/vagrant/caffe/python/caffe/imagenet/ilsvrc_2012_mean.npy' as a pickle
what am I doing wrong here? Do I need to process the mean.binaryproto file from Digits somehow before I use it with caffe?
You need to convert the .binaryproto file to a numpy file.
There is a nice example here using caffe.io and caffe.proto.
i would like to change the apperance of the log file, generated by ccnet. It is useful, if the error messages are separated from the original Log Messages, but in order to debug, it is a bit tricky to see, when the error really happened. Our powershell skript runs for 6-8 hours and creates about 38k lines in the log file, so i would really apprechiate a solution, how i could list the errors with the other lines in the log files. Additionally it would be cool, if all the errors would still appear separatedly.
So far i have not found a lot documentary that explained how to change the log file output...
Simon
Not sure how this is logged, but in the end, logs produced during the build are put into the build-log file, that you will find in artifacts folder.
Then this logs are transposed into html output using xsl transforms. If none of the built-in reports is useful to you, you can create a custom xsl and plug it in, see the dashboard.config file, the following section allows for adding additional xsl transforms:
<buildReportBuildPlugin>
<xslReportBuildPlugin description="MSBuild Log" actionName="MSBuildBuildReport" xslFileName="xsl\MSBuild4Log.xsl"/>
...
If you know what the error messages are going to be you can parse them with an xsl file and generate some html that will show up in the build emails. The following goes in ccservice.exe.config.
<xslFiles>
<file name="c:\path\to\custom_errors.xsl"/>
</xslFiles>
custom_errors.xsl is an xsl file that finds the error messages in the raw build log xml and then generates html from them. This html will show up in the build emails. You have to create custom_errors.xsl. It's a significant amount of work to get working the first time especially if you're new to xml/xsl/html/css. If you undertake this I suggest doing all the testing outside of ccnet using a xsl transformer and inputting a sample ccnet build log. ccnet uses a css file to style the html so be aware of that. You can edit this too.
Note you have to restart the ccnet service after editing ccservice.exe.config.
One of our client does not know how to save/generate/produce/provide swift messages in its raw format via their swift alliance system, neither do i. By raw format i mean following format
{1:F21XXXXXXXXXXXX7108170239}{4:{177:1112071543}{451:0}}{1:F01XXXXXXXXXXXX7108170239}{2:O9502137111207XXXXXXXXXXXX54153885641112071537N}{4:
:20:XXXXXXXXXXXXXX
:25:XXXXXXXXXX
:28C:00237/00001
:60F:C090513AUD1162994,30
:61:1112061207D110,00NCHKFDD388407 //071211WDM9103
291111 GUJ
:61:1112061207D200,00NCHK3927611471 //071211WDM9104
090911 KAR
:62F:C090513AUD1610881,52
:64:C090513AUD1610881,52
-}{5:{CHK:XXXXXXXXXXXX}}{S:{COP:S}}
Is there any way/interface to integrate with SWIFT and extract these files Or is there any possibility to schedule SWIFT to generate these files Or even manual steps to do it?
Edit 1
Messages are saved by creating a profile from the application and setting connection type to "File Transfer". It will then keep generating files in ISO format to a shared location.
to get output file from swift you need to configure message partner CBSOUT
to do so do the following
enter to swift application SAE or SAA with super user.
click on
Application interface.
from the list right click on
CBSOUT and then enable
to configure CBSOUT double click on it.
Data format :select RJE
output path name : put the folder you want to store the files
output the extension : put the file extension example :out or txt.
session initiation select Auto.
number of message =1
finish.
good lucky.
byeeeeeee
Messages are saved by creating a profile from the application and setting connection type to "File Transfer". It will then keep generating files in ISO format to a shared location.