For context, I’m trying to activate a virtual environment, and then run my python script from within that venv, all in one powershell session. I’m doing this in a .bat file that I will later start as a service (The whole point of this is to run main.py in the venv as a windows service)
I tried this:
powershell -noexit -file C:\MyPythonProject\venv\Scripts\Activate.ps1; python C:\MyPythonProject\main.py
This doesn’t seem to work. Only the first command (to activate the venv) works. What am I doing wrong?
use & to chain commands:
powershell -noexit -file C:\MyPythonProject\venv\Scripts\Activate.ps1 & python C:\MyPythonProject\main.py
https://superuser.com/questions/1079403/how-to-run-multiple-commands-one-after-another-in-cmd/1079420
Related
I don't use powershell often, so this may be an obvious question but my google-fu is failing me.
What is the difference between running the following commands, on a Windows platform?
In cmd prompt:
C:\> powershell cd d:\foo
and in powershell prompt:
PS C:\> cd d:\foo
The latter changes drive and directory as expected. The former does nothing.
Basically, when you run powershell cd d:\foo it opens a separate Powershell and runs the cd command. As opposed to the second one, you are actually in the Powershell session. So it, the first one, does open a Powershell process > change the directory and then it closes the process.
Powershell workflow is not supported in powershell 32bit mode. Thus i want to execute the script using powershell 64bit mode.How to run .ps1 script in 64bit mode via jenkins?
You could create your custom powershell step like in this stackoverflow answer
Executing powershell command directly in jenkins pipeline
You'll have to replace powershell.exe by the path to your powershell 64b exe
You could also use a shebang. some literature on that at How can I use a shebang in a PowerShell script?
it works by calling using c:\windows\sysnative\WindowsPowerShell\v1.0\powershell.exe instead of c:\windows\system32\WindowsPowerShell\v1.0\powershell.exe
find more information about sysnative at https://www.thewindowsclub.com/sysnative-folder-in-windows-64-bit
I confirm that calling:
%SystemRoot%\sysnative\WindowsPowerShell\v1.0\powershell.exe -executionpolicy Unrestricted -file "%~dp0\file.ps1"
results in the 64 bit powershell.
One can validate inside their script by printing out debug of:
$GE_64BitPS_Status=[System.Environment]::Is64BitProcess
write-host $GE_64BitPS_Status
I am creating an 7zip sfx installer in latest Windows 10 which is expected to run a powershell script. when extraction is done, the powershell window is shown up but quickly closed without executing the script.
Any help is much appreciated!
I have tried to sign the script file and the installer.exe itself with self signed certificate, but no luck.
I have changed the Powershell ExecutionPolicy to Unrestricted for all scopes for troubleshooting, but no luck either
I use process monitor in sysinternals to capture the powershell.exe behavor, and found powershell starts to exit thread after reading and writing c:\Users\xxx\AppData\Local\Microsoft\Windows\PowerShell\StartupProfileData-Interactive
Here is my config.txt for 7zip sfx:
;!#Install#!UTF-8!
Title="Cloud API"
BeginPrompt="Do you want to install Cloud API?"
RunProgram="powershell.exe -NoExit –NoProfile -ExecutionPolicy Bypass -File %%T\\cloud_api\\installer.PS1"
Directory="C:\\Windows\\System32\\WindowsPowerShell\\v1.0\\"
;!#InstallEnd#!
I am zipping the files in python by:
..\\7zr a -sfx7zSD.sfx cloud-api.7z .\\cloud-api -r -y
I am expecting the installer.PS1 getting executed after unzipping, but only powershell.exe is run and exit quickly without running the script at all.
A first step to troubleshooting this problem would be to declare the full path of the .ps1 script in your 7zip config. This will ensure you are calling the script you intend to launch.
I am having a bunch of issues with getting a PowerShell command to run. All it is doing is running a command that would be run in a CMD prompt window.
Here is the command:
"C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\i386\CmRcViewer.exe" PCNAME
I have tried the following with no success (I have tried many iterations of this to try and get one that works. Syntax is probably all screwed up):
$TEXT = $textbox.Text #$textbox is where the user enters the PC name.
$CMDCOMMAND = "C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\i386\CmRcViewer.exe"
Start-Process '"$CMDCOMMAND" $TEXT'
#iex -Command ('"C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\i386\CmRcViewer.exe"' $TEXT)
The command will just open SCCM remote connection window to the computer the user specifies in the text box.
Try this:
& "C:\Program Files (x86)\Microsoft Configuration Manager\AdminConsole\bin\i386\CmRcViewer.exe" PCNAME
To PowerShell a string "..." is just a string and PowerShell evaluates it by echoing it to the screen. To get PowerShell to execute the command whose name is in a string, you use the call operator &.
To run or convert batch files externally from PowerShell (particularly if you wish to sign all your scheduled task scripts with a certificate) I simply create a PowerShell script, e.g. deletefolders.ps1.
Input the following into the script:
cmd.exe /c "rd /s /q C:\#TEMP\test1"
cmd.exe /c "rd /s /q C:\#TEMP\test2"
cmd.exe /c "rd /s /q C:\#TEMP\test3"
*Each command needs to be put on a new line calling cmd.exe again.
This script can now be signed and run from PowerShell outputting the commands to command prompt / cmd directly.
It is a much safer way than running batch files!
One solution would be to pipe your command from PowerShell to CMD. Running the following command will pipe the notepad.exe command over to CMD, which will then open the Notepad application.
PS C:\> "notepad.exe" | cmd
Once the command has run in CMD, you will be returned to a PowerShell prompt, and can continue running your PowerShell script.
Edits
CMD's Startup Message is Shown
As mklement0 points out, this method shows CMD's startup message. If you were to copy the output using the method above into another terminal, the startup message will be copied along with it.
For those who may need this info:
I figured out that you can pretty much run a command that's in your PATH from a PS script, and it should work.
Sometimes you may have to pre-launch this command with cmd.exe /c
Examples
Calling git from a PS script
I had to repackage a git client wrapped in Chocolatey (for those who may not know, it's a package manager for Windows) which massively uses PS scripts.
I found out that, once git is in the PATH, commands like
$ca_bundle = git config --get http.sslCAInfo
will store the location of git crt file in $ca_bundle variable.
Looking for an App
Another example that is a combination of the present SO post and this SO post is the use of where command
$java_exe = cmd.exe /c where java
will store the location of java.exe file in $java_exe variable.
You must use the Invoke-Command cmdlet to launch this external program. Normally it works without an effort.
If you need more than one command you should use the Invoke-Expression cmdlet with the -scriptblock option.
I'm using Hudson version 1.324 for CI and have a couple of issues:
Environment:
Windows Server 2008
Powershell v1.0
Hudson 1.324 running as a service
Hudson Powershell Plugin installed
Psake (aka. "Powershell Make/Rake" available from Github) 0.23
(All current/latest versions as of this initial post)
I have a Powershell (PS) script that works to compile, run NUnit tests, and if successful, create a 7z file of the output. The PS script works from the command line, on both my local development box as well as the CI server where Hudson is installed.
1) Execution Policy with Powershell.
I initially ran a PS console on the server, ran Set-ExecutionPolicy Unrestricted, which allows any script to be run. (Yes, I realize the security concerns here, I'm trying to get something to work and Unrestricted should remove the security issues so I can focus on other problems.)
[This worked, and allowed me to fire off the PS build script from Hudson yesterday. I then encountered another problem, but we'll discuss that more in item #2.]
Once Hudson could fire off a PS script, it complained with the following error:
"C:\Windows\system32\WindowsPowerShell\v1.0\powershell "&
'OzSystems.Tools\psake\psake.ps1' '.\oz-build.ps1'" The term
'OzSystems.Tools\psake\psake.ps1' is not recognized as a cmdlet, funct
ion, operable program, or script file. Verify the term and try again.
At line:1 char:2
+ & <<<< 'OzSystems.Tools\psake\psake.ps1' '.\oz-build.ps1'"
Using the same command line, I am able to successfully execute the PS script from the command line manually. However Hudson is unable to get PS to do the same. After looking at additional PS documentation I also tried this:
"& 'OzSystems.Tools\psake\psake.ps1' '.\oz-build.ps1'"
and got a similar error. There does not appear to be any documentation for the Powershell plugin for Hudson. I've gone through all the Powershell plugin files and don't see anything that's configurable. I can't find a log file for Hudson to get additional information.
Can anyone help me past this?
2) I spent yesterday wrestling with #1. I came in this AM and tried to dig in again, after restarting the Hudson server/service, and now it appears that the ExecutionPolicy has been reset to Restricted. I did what worked yesterday, opened a PS console and Set-ExecutionPolicy to Unrestricted. It shows Unrestricted in the PS console, but Hudson says that it doesn't have rights to execution PS scripts. I reopened a new PS console and confirmed that the ExecutionPolicy is still Unrestriced -- it is. But Hudson evidently is not aware of this change. Restarting Hudson service again does not change Hudson's view of the policy.
Does anyone know what's going on here?
Thanks, Derek
I just ran into the problem of running powershell scripts in hudson. The thing is that you are running a 32-bit process of Java, and you've configured Hudson for 64-bit but not for 32-bit. See the following thread we created at microsoft.
http://social.technet.microsoft.com/Forums/en/winserverpowershell/thread/a9c08f7e-c557-46eb-b8a6-a19ba457e26d
If your lazy.
1. Start powershell (x86) from the start menu as administrator
2. Set the execution policy to remotesigned
Run this once and your homefree.
When Running PowerShell from a scheduled task or Hudson you want to:
Specify the -ExecutionPolicy parameter (in your case: -Ex Unrestricted)
Specify that command using either -Command { ... } or -File NOT BOTH and not without specifying which you mean.
Try this (except that I don't recommend using relative paths):
PowerShell.exe -Ex Unrestricted -Command "C:\Path\To\OzSystems.Tools\psake\psake.ps1" ".\oz-build.ps1"
To be clear, this will work too:
PowerShell.exe -Ex Unrestricted -Command "&{&'OzSystems.Tools\psake\psake.ps1' '.\oz-build.ps1'}"
The first string after -Command is interpreted as THE NAME OF A COMMAND, and every parameter after that is just passed to that command as a parameter. The string is NOT a script, it's the name of a command (in this case, a script file)... you cannot put "&'OzSystems.Tools\psake\psake.ps1'" but you can put "OzSystems.Tools\psake\psake.ps1" even if it has spaces.
To quote from the help (run PowerShell -?) emphasis mine:
-Command
Executes the specified commands (and any parameters) as though they were
typed at the Windows PowerShell command prompt, and then exits, unless
NoExit is specified. The value of Command can be "-", a string. or a
script block.
If the value of Command is "-", the command text is read from standard
input.
If the value of Command is a script block, the script block must be enclosed
in braces ({}). You can specify a script block only when running PowerShell.exe
in Windows PowerShell. The results of the script block are returned
to the parent shell as deserialized XML objects, not live objects.
If the value of Command is a string, Command must be the last parameter
in the command , because any characters typed after the command are
interpreted as the command arguments.
I have been having the same problems as you (as you've seen from my comments). I have given up on the powershell launcher and moved to running things using the batch file launcher. Even though I had set the system to unrestricted that setting didn't seem to matter to hudson's launcher. I don't know if it runs in some other context or something, even adding things to the global profile.ps1 didn't seem to help. What I ended up doing was running
powershell " set-executionpolicy Unrestricted; & 'somefile.ps1'"
which does what I need, although it isn't ideal. I've e-mailed the plugin author about this and will update.
For question #1, try this (assuming you are using PowerShell 2.0):
"C:\Windows\system32\WindowsPowerShell\v1.0\powershell -executionPolicy Unrestricted -file OzSystems.Tools\psake\psake.ps1 C:\{path}\oz-build.ps1"
You are using "." for the path to oz-build.ps1. I suspect you will need to provide the full path to your oz-build.ps1 file to make this work. Unless the infrastructure that executes the command above happens to have the current dir set correctly. And even if it is set correctly for the "process", that only matters to .NET/Win32 API calls and not to PowerShell cmdlets. Current dir in PowerShell is tracked differently than the process's current dir because PowerShell can have multiple runspaces running simultaneously. That sort of global, mutable value doesn't work in this concurrent scenario.
As for question #2, what account does the Hudson service run under? Make sure that account has executed Set-ExecutionPolicy RemoteSigned (or unrestricted).
I just got through this exact problem. What a pain!
If you are running a 32-bit JVM on a 64-bit Windows, make sure that you set the execution policy for the 32-bit Powershell interface. I found my 32 bit executable here:
C:\Windows\syswow64\Windowspowershell\v1.0\powerhsell.exe
The 32- and 64-bit Powershell environments are completely distinct so setting the execution policy in one has no effect on the other.