have a view like this:
Table
The record "NDocumento" is populated only in the first row of a transaction by design. These rows are grouped by the column "NMov" which is the ID.
Since this is a view, I would like to populate each empty "NDocumento" record with the corresponding value contained in the first transaction through a SELECT statement.
As you can see by the picture this is MS-SQL Server 2008, so the lack of LAG makes the game harder.
I would immensely appreciate any help,
thanks
Try this:
SELECT
T1.NDocumento
, T2.NMov
, T2.NRiga
-- , T2. Rest of the fields
FROM NDocumentoTable T1
JOIN NDocumentoTable T2 ON T2.NMov = T1.NMov
WHERE T1.NRiga = 1
I used LAG() over the partition of NMov,Causale by based on your data. You cna change the partition with your requirement. The logic is you get the previous value if the NDocument is empty for the given partition.
CREATE TABLE myTable_1
(
NMov int
,NRiga int
,CodiceAngrafica varchar(100)
,Causale varchar(100)
,DateRegistration date
,DateDocumented date
,NDocument varchar(100)
)
INSERT INTO myTable_1 VALUES (5133, 1, '', 'V05', '01/14/2021', '01/14/2021', 'VI-2100001')
,(5133, 2, '', 'V05', null, null, '')
,(5134, 1, '', 'V05', '01/14/2021', '01/14/2021', 'VI-2100002')
,(5134, 2, '', 'V05', null, null, '')
SELECT
NMov
,NRiga
,CASE WHEN ISNULL(NDocument,'') = ''
THEN LAG(NDocument) OVER (PARTITION BY NMov,Causale ORDER BY NMov)
ELSE NDocument END AS [NDocument]
FROM myTable_1
Related
PostgreSQL 11.1 PgAdmin 4.1
This works some of the time:
BEGIN;
SET CONSTRAINTS ALL DEFERRED;
WITH _in(trx, lastname, firstname, birthdate, old_disp, old_medname, old_sig, old_form, new_disp, new_medname, new_sig, new_form, new_refills) AS (
VALUES ('2001-06-07 00:00:00'::timestamp,
UPPER(TRIM('JONES')), UPPER(TRIM('TOM')), '1952-12-30'::date,
64::integer,
LOWER(TRIM('adipex 37.5mg tab')), LOWER(TRIM('one tab po qd')), LOWER(TRIM('tab')),
63::integer,
LOWER(TRIM('adipex 37.5mg tab')), LOWER(TRIM('one tab po qd')), LOWER(TRIM('tab')),
33::integer
)
),
_s AS ( -- RESOLVE ALL SURROGATE KEYS.
SELECT n.*, d1.recid as old_medication_recid, d2.recid as new_medication_recid, pt.recid as patient_recid
FROM _in n
JOIN medications d1 ON (n.old_medname, n.old_sig, n.old_form) = (d1.medname, d1.sig, d1.form)
JOIN medications d2 ON (n.new_medname, n.new_sig, n.new_form) = (d2.medname, d2.sig, d2.form)
JOIN patients pt ON (pt.lastname, pt.firstname, pt.birthdate) = (n.lastname, n.firstname, n.birthdate)
),
_t AS ( -- REMOVE CONFLICTING RECORD, IF ANY.
DELETE FROM rx r
USING _s n
WHERE (r.trx::date, r.disp, r.patient_recid, r.medication_recid)=(n.trx::date, n.new_disp, n.patient_recid, n.new_medication_recid)
RETURNING r.*
),
_u AS( -- GET NEW SURROGATE KEY.
SELECT COALESCE(_t.recid, r.recid) as target_recid, r.recid as old_recid
FROM _s n
JOIN rx r ON (r.trx, r.disp, r.patient_recid, r.medication_recid) = (n.trx, n.old_disp, n.patient_recid, n.old_medication_recid)
LEFT JOIN _t ON (_t.trx::date, _t.disp, _t.patient_recid, _t.medication_recid) = (n.trx::date, n.new_disp, n.patient_recid, n.new_medication_recid)
)
UPDATE rx r -- UPDATE ORIGINAL RECORD WITH NEW VALUES.
SET disp = n.new_disp, medication_recid = n.new_medication_recid, refills = n.new_refills, recid = _u.target_recid
FROM _s n, _u
WHERE r.recid = _u.old_recid
RETURNING r.*;
COMMIT;
Where table rx is defined as:
CREATE TABLE phoenix.rx
(
recid integer NOT NULL DEFAULT nextval('rx_recid_seq'::regclass),
trx timestamp without time zone NOT NULL,
disp integer NOT NULL,
refills integer,
tprinted timestamp without time zone,
tstop timestamp without time zone,
modified timestamp without time zone DEFAULT now(),
patient_recid integer NOT NULL,
medication_recid integer NOT NULL,
dposted date NOT NULL,
CONSTRAINT pk_rx_recid PRIMARY KEY (recid),
CONSTRAINT rx_unique UNIQUE (dposted, disp, patient_recid, medication_recid)
DEFERRABLE,
CONSTRAINT rx_medication_fk FOREIGN KEY (medication_recid)
REFERENCES phoenix.medications (recid) MATCH SIMPLE
ON UPDATE CASCADE
ON DELETE RESTRICT
DEFERRABLE,
CONSTRAINT rx_patients FOREIGN KEY (patient_recid)
REFERENCES phoenix.patients (recid) MATCH SIMPLE
ON UPDATE CASCADE
ON DELETE RESTRICT
)
After many hours, it is found that the "Delete.." of a conflicting record works as expected, but the "COALESCE" STATEMENT seems to fail when deciding on the new surrogate key (primary key) of rx.recid -- it does not seem to receive the result of the delete. (Or maybe the timing is wrong???)
Any help would be most appreciated.
TIA
This is documented:
The sub-statements in WITH are executed concurrently with each other and with the main query. Therefore, when using data-modifying statements in WITH, the order in which the specified updates actually happen is unpredictable. All the statements are executed with the same snapshot (see Chapter 13, so they cannot “see” one another's effects on the target tables.
Don't use the same table twice in a statement with a CTE if it occurs in a DML statement. Rather, use DELETE ... RETURNING and use the returned values in the other parts of the statement.
If you cannot rewrite the statement like that, use more than one statement instead of putting everything into a single CTE.
#LaurenzAlbe is totally correct in his answer. Below is a working solution to my problem. There are a few things to note:
The unique constraint is formed on a column in rx defined as a date and created by a trigger on update/insert that casts the timestamp of trx to a date: as in trx::date. For reasons I am not clear on, using r.trx::date in place of r.dposted leads to many records being identified and not the one record I want. Not sure why???. So the first fix was to use r.dposted, not r.trx::date.
Although the cte's are designed to be independent of each other, by using "RETURNING..." and incorporating the cte's in a step-wise fashion, one can be built upon another to obtain a final result set.
The working code is:
WITH _in(trx, lastname, firstname, birthdate, old_disp, old_medname, old_sig, old_form, new_disp, new_medname, new_sig, new_form, new_refills) AS (
VALUES ('2001-06-07 00:00:00'::timestamp,
UPPER(TRIM('smith')), UPPER(TRIM('john')), '1957-12-30'::date,
28::integer,
LOWER(TRIM('test')), LOWER(TRIM('i am sig')), LOWER(TRIM('tab')),
28::integer,
LOWER(TRIM('test 1')), LOWER(TRIM('i am sig')), LOWER(TRIM('tab')),
8::integer
)
),
_m AS (
SELECT n.*, d1.recid as old_medication_recid, d2.recid as new_medication_recid, pt.recid as patient_recid
FROM _in n
JOIN patients pt ON (pt.lastname, pt.firstname, pt.birthdate) = (n.lastname, n.firstname, n.birthdate)
JOIN medications d1 ON (n.old_medname, n.old_sig, n.old_form) = (d1.medname, d1.sig, d1.form)
LEFT JOIN medications d2 ON (n.new_medname, n.new_sig, n.new_form) = (d2.medname, d2.sig, d2.form)
),
_t AS ( -- REMOVE CONFLICTING RECORD, IF ANY.
DELETE FROM rx r
USING _m
WHERE (r.dposted, r.disp, r.patient_recid, r.medication_recid) = (_m.trx::date,_m.new_disp, _m.patient_recid, _m.new_medication_recid)
RETURNING r.*
),
_s AS ( -- GET NEW SURROGATE KEY
SELECT _m.*, r1.recid as old_recid, r2.recid as new_recid, COALESCE(r2.recid, r1.recid) as target_recid
FROM _m
JOIN rx r1 ON (r1.dposted, r1.disp, r1.patient_recid, r1.medication_recid) = (_m.trx::date,_m.old_disp, _m.patient_recid, _m.old_medication_recid)
LEFT JOIN rx r2 ON (r2.dposted, r2.disp, r2.patient_recid, r2.medication_recid) = (_m.trx::date,_m.new_disp, _m.patient_recid, _m.new_medication_recid)
LEFT JOIN _t ON (_t.recid = r2.recid)
)
UPDATE rx -- UPDATE ORIGINAL RECORD WITH NEW VALUES.
SET disp = _s.new_disp, medication_recid = _s.new_medication_recid, refills = _s.new_refills, recid = _s.target_recid
FROM _s
WHERE rx.recid = _s.old_recid
RETURNING rx.*;
COMMIT;
Hope this helps somebody.
I'm having problem with using the values of an array column in a where clause. Complete example to reproduce:
create type public.genre_type as enum ('scifi', 'fantasy', 'crime', 'horror', 'classics');
create table public.reader_profile(
id integer,
fave_genres genre_type ARRAY
);
create table public.books(
id serial not null,
title text,
genre_type public.genre_type
);
insert into public.reader_profile(id, fave_genres) values (1, array['crime', 'horror']::public.genre_type[]);
insert into public.reader_profile(id, fave_genres) values (2, array['fantasy', 'scifi']::public.genre_type[]);
insert into public.reader_profile(id, fave_genres) values (3, array['scifi', 'classics']::public.genre_type[]);
insert into public.books(title, genre_type) values ('gone with the wind', 'classics');
insert into public.books(title, genre_type) values ('Foundation', 'scifi');
insert into public.books(title, genre_type) values ('Dune', 'scifi');
-- THE FOLLOWING FAILS!!!
select * from public.books
where genre_type in (
select fave_genres from public.reader_profile where id = 2
);
I've tried ...where genre_type = ANY() per other stackoverflow answers as well as ...where genre_type <# () and I can't get anything to work! It seems the inner query (which works) is being return as an array type and not a list of values or something. Any help appreciated!!
I agree with #Hogan that this seems doable with a JOIN but the syntax you are looking for is the following:
SELECT *
FROM books
WHERE genre_type = ANY(ARRAY(SELECT fave_genres FROM reader_profile WHERE id = 2))
;
Demo
Can I suggest using a join instead?
select *
from public.books b
join public.reader_profile fg on b.genre_type = ANY(rp.fave_genres) and fg.id = 2
I've created below code to implement SCD type 2 using merge, when i run the code i'm getting primary key violations on csname field. I have the below values as part of primary key, not sure whether merge SQL does support for varchar or not.
if I run the normal inner join SQL on the same key then i'm getting the matching records as well.
Any help much appreciated
csname
ER - Building Complaints
TR - Building Applications
CREATE PROCEDURE dbo.load_target
AS
BEGIN
INSERT INTO [TR_DW].[enum].[Rt]([csname],[enddatetime],[EffectiveToDate],[EffectiveFromDate],[CurrentRecord])
SELECT[csname],[enddatetime],[EffectiveToDate],[EffectiveFromDate],[CurrentRecord]
FROM
(
MERGE [TR_DW].[enum].[Rt] RtCSQSuTT
USING [TR].[enum].[Rt] RtCSQSuST
ON (RtCSQSuTT.csname = RtCSQSuST.csname)
WHEN NOT MATCHED THEN
INSERT ([csname],[enddatetime],[EffectiveToDate],[EffectiveFromDate],[CurrentRecord])
VALUES ([csname],[enddatetime],'12/31/9999', getdate(), 'Y')
WHEN MATCHED AND RtCSQSuTT.[CurrentRecord] = 'Y' AND
(ISNULL(RtCSQSuTT.[enddatetime], '') != ISNULL(RtCSQSuST.[enddatetime], ''))THEN
UPDATE SET
RtCSQSuTT.[CurrentRecord] = 'N',
RtCSQSuTT.[EffectiveFromDate] = GETDATE() - 1,
RtCSQSuTT.[EffectiveToDate] = GETDATE()
OUTPUT $Action Action_Taken,RtCSQSuST.[csqname],RtCSQSuST.[enddatetime],'12/31/9999' AS[EffectiveToDate],GETDATE() AS[EffectiveFromDate],'Y' AS[CurrentRecord]
)AS MERGE_OUT21
WHERE MERGE_OUT21.Action_Taken = 'UPDATE';
END
GO
I am a newbie here.
I am using PostgreSQL to manipulate lots of data in my specific field of research. Unfortunately, I am encountering a problem that is not allowing me to continue my analysis. I tried to simplify my problem to clearly illustrate it.
Let's suppose I have a table called "Buyers" with those data:
table_buyers
The buyers can make ONLY ONE purchase in each store or none. There are three stores and there a table for each one. Just like below:
table_store1
table_store2
table_store3
To create the tables, I am using the following code:
CREATE TABLE public.buyer
(
ID integer NOT NULL PRIMARY KEY,
name text NOT NULL,
phone text NOT NULL
)
WITH (
OIDS = FALSE
)
;
CREATE TABLE public.Store1
(
ID_buyer integer NOT NULL PRIMARY KEY,
total_order numeric NOT NULL,
total_itens integer NOT NULL
)
WITH (
OIDS = FALSE
)
;
CREATE TABLE public.Store2
(
ID_buyer integer NOT NULL PRIMARY KEY,
total_order numeric NOT NULL,
total_itens integer NOT NULL
)
WITH (
OIDS = FALSE
)
;
CREATE TABLE public.Store3
(
ID_buyer integer NOT NULL PRIMARY KEY,
total_order numeric NOT NULL,
total_itens integer NOT NULL
)
WITH (
OIDS = FALSE
)
;
To add the information on the tables, I am using the following code:
INSERT INTO buyer (ID, name, phone) VALUES
(1, 'Alex', 88888888),
(2, 'Igor', 77777777),
(3, 'Mike', 66666666);
INSERT INTO Store1 (ID_buyer, total_order, total_itens) VALUES
(1, 87.45, 8),
(2, 14.00, 3),
(3, 12.40, 4);
INSERT INTO Store2 (ID_buyer, total_order, total_itens) VALUES
(1, 785.12, 7),
(2, 9874.21, 25);
INSERT INTO Store3 (ID_buyer, total_order, total_itens) VALUES
(2, 45.87, 1);
As all the tables are interconnected by buyer's ID, I wish I could have a query that generates an output just like this:
desired output table.
Please, note that if the buyer did not buy anything in a store, I must print '0'.
I know this is an easy task, but unfortunately, I have been failing on accomplish it.
Using the 'AND' logical operator, I tried the following code to accomplish this task:
SELECT
buyer.id,
buyer.name,
store1.total_order,
store2.total_order,
store3.total_order
FROM
public.buyer,
public.store1,
public.store2,
public.store3
WHERE
buyer.id = store1.id_buyer AND
buyer.id = store2.id_buyer AND
buyer.id = store3.id_buyer;
But, obviously, it just returned 'Igor' as this was the only buyer that have bought items on all three stores (print screen).
Then, I tried the 'OR' logical operator, just like the following code:
SELECT
buyer.id,
buyer.name,
store1.total_order,
store2.total_order,
store3.total_order
FROM
public.buyer,
public.store1,
public.store2,
public.store3
WHERE
buyer.id = store1.id_buyer OR
buyer.id = store2.id_buyer OR
buyer.id = store3.id_buyer;
But then, it returns 12 lines with wrong values (print screen).
Clearly, my mistake is about not considering that 'Buyers' don't have to on all three stores on my code. I just can't correct it on my own, can you please help me?
I appreciate a lot for an answer that can light up my way. Thanks a lot!
Tips about how I can search for this issue are very welcome as well!
Ok. I doubt that this is the final answer for you, but its a start
SELECT
buyer.id,
buyer.name,
COALESCE( gb_store1.total_orders, 0 ) as store1_total,
COALESCE( gb_store2.total_orders, 0 ) as store2_total,
COALESCE( gb_store3.total_orders, 0 ) as store3_total
FROM
public.buyer,
LEFT OUTER JOIN ( SELECT ID_buyer,
SUM( total_orders ) as total_orders,
SUM( total_itens ) as total_itens
FROM public.store1
GROUP BY ID_buyer ) gb_store1 ON gb_store1.id_buyer = buyer.id ,
LEFT OUTER JOIN ( SELECT ID_buyer,
SUM( total_orders ) as total_orders,
SUM( total_itens ) as total_itens
FROM public.store2
GROUP BY ID_buyer ) gb_store2 ON gb_store2.id_buyer = buyer.id ,
LEFT OUTER JOIN ( SELECT ID_buyer,
SUM( total_orders ) as total_orders,
SUM( total_itens ) as total_itens
FROM public.store3
GROUP BY ID_buyer ) gb_store3 ON gb_store3.id_buyer = buyer.id ;
So, this query has a couple elements should focus on. The subselects/groupby allow you to total within your subtables by ID_buyer. The LEFT OUTER JOIN make its so your query can still return a result, even if a subselect finds no matching record. Finally, the COALESCE allows you to return 0 when one of your totals is NULL (because the subselect found no match).
Hope this helps.
There are two inserts in my trigger which is fired by an update. My Vendor_Hist table has a field called thID which is the primary key in Task_History table. thID gets its' value from mySeq.nextval.
INSERT INTO TASK_HISTORY
( thID, phId, LABOR, VERSION )
( select mySeq.NEXTVAL, mySeq2.CurrVal, LABOR, tmpVersion
from tasks t
where t.project_id = :new.project_ID );
select mySeq.currval into tmpTHID from dual; -- problem here!
INSERT INTO VENDOR_HIST
( vhID, thID, Amount, Position, version )
( select mySeq3.NEXTVAL, tmpTHID,
Amount, Position, tmpVersion
from vendors v2, tasks t2
where v2.myID = t2.myID
and t2.project_id = :new.project_ID );
Now, my problem is the tmpTHID always the latest value of mySeq.nextVal. So, if thID in task_history is 1,2,3, I get three inserts into vendor_hist table with 3,3,3. It has to be 1,2,3. I also tried
INSERT INTO TASK_HISTORY
( thID, phId, LABOR, VERSION )
( select mySeq.NEXTVAL, mySe2.CurrVal, LABOR, tmpVersion
from tasks t
where t.project_id = :new.project_ID ) returning thID into :tmpTHID;
but then I get a "warning compiled with errors" message when I execute the trigger. How do I make sure that the thID in first insert is also the same in my second insert?
Hope it makes sense.
for i in (select * from tasks t
where t.project_id = :new.project_id)
loop
insert into task_history
( thID, phId, LABOR, VERSION )
values
(mySeq.NEXTVAL, mySeq2.CurrVal, i.LABOR, i.tmpVersion);
for each j in (select * from vendors v
where i.myId = v.myId)
loop
insert into vendor_history
( vhID, thID, Amount, Position, version )
values
(mySeq3.NEXTVAL, mySeq.CURRVAL, j.Amount, j.Position, j.tmpVersion)
end loop;
end loop;
I'm assuming the columns inserted in the second insert are from the VENDORS table; if not, the referencing cursor (i or j) should be used as appropriate.
Instead of the currVal, it works with the following subselect.
( select min(thID) from task_history t3
where t3.project_id = t2.project_id
and t3.myID = t2.myID
and t3.version = tmpVersion ),