I have a problem regarding entering values into an autocomplete field.
When a word is entered and it ends with a space, the value is removed from the field when leaving that field. The value is removed, even though it exists in autocomplete suggestions:
The autocomplete implements a "closed selection": users can only select values that are in a predefined "itemset"; they can't enter a new value. Should they try to enter a value that doesn't exist in the itemset, upon leaving the field, that value is removed, to make it clear to users that the value wasn't accepted.
Case and spacing matters, so if users enter a value with an additional space at the end, it is considered to be a different value, and thus, on leaving the field, it is removed, which explains the behavior you're seeing.
I'm using TinyMce textarea editor and have a problem. As you probably know Tinymce transforms a standard html textarea into a rich text editor.
On our 'edit listing' page we call up some text from our db for the user to edit (previously in a standard textarea, now in the tinymce textarea.
Previously the standard textarea would preserve linebreaks and the user would get several paragraphs of text in the text area, now with tinyMCE they get a huge chunk of text with no linebreaks. (I have pasted an example of an entry in our db below - as you can see it has line breaks in it by tinymce seems to be ignoring them when it displays them in the editor).
Just to clarify my issue is now that tinymce is stripping something when I submit the form, it's that when I pull text (that contains line breaks) from the db and populate the tinymce textarea with that data (for the user to edit) in the tinymce textarea - the text appears (in the tinymce textarea) as one massive chunk of text with my paragraphs (whereas in a standard textarea it is nicely formatted with linebreaks)
Any help on how to resolve this would be greatly appreciated - do I need to use some sort of populate() type function to put the text in, or maybe I need to replace all the linebreaks with a different special character that tinyMCE will recognise as a line break and preserve?..
Thanks in advance.
Nick
example from db:
Here is line one
Here is line two
And here is line three
Which appears in tinymce as:
Here is line one Here is line two And here is line three
I faced a similar a problem, a while back and had questions just like yours. Also I finally ended up on SE just like you.
Anyway, I think I have the solution to your problem. If you are using PHP as your server side language, then you should use nl2br() PHP function.
Suppose you have stored your content fetched from the database in a php variable. Something like this:
$content = $row['content'];
Now when displaying it on to your screen, use the nl2br() function.
echo nl2br("<p>".$content."<p>");
Now, this part inside () depends on how you want to output the data. And I will leave it to you to figure that part out.
Hope this helps.
Does anyone know if its possible to create a parameter in SSRS that will display a Textarea instead of a Texbox and let the user type in a few paragraphs of text, including carriage returns?
I've a requirement to create a report that will end up as data with a cover letter. A section of the cover letter needs to have a block of text, which the user can specify when setting the parameters.
I can create a 'text' parameter which displays a Textbox, but that does not accept carriage returns. I have tried to copy and paste text from Word, but then it only takes the first line of text.
Has anyone got any suggestions? So far I've not managed to find any solutions online.
Thanks in advanced.
Sorry problem solved,
I changed the text parameter so that it could accept multiple values. Then on the textbox that displayed the text on the letter I changed the expression to read:
=Join(Parameters!FreeText.Value, vbcrlf)
Sorted.
I have a Word document with fields of the reference variety, which occur in the form "[field].[field]"--in other words, there's a period between the two fields. I want to globally replace this with a space.
Word offers the ^d special character to search for fields, but for some reason the query "^d.^d" does not find anything. However, ".^d" does. Now comes the problem, however--what do I specify as the replacement text in order to retain the field code? If using regular expressions, I could use a "Find What Expression" such as \1, but with regexp ("wild card") mode the ^d is not permitted.
I guess I could write a macro...
I would like to add to Bibadia's solution.
An example of an index entry field; we want to change a name we misspelled.
Make sure hidden formatting is displayed (toggle with SHIFT+CTRL+F8).
Make sure wildcards option is not selected. To search for fields, use the opening and closing field braces code (optionally use ^w for spaces, as Bibadia suggested):^19 XE "Deo, John" ^21
Replace won't recognize field braces character, but will allow to insert the clipboard's content. ;). To do that, insert in text the correct entry. CTRL+F9 to insert field and type:XE "Doe, John"
Select the field above and copy
Use ^c in the replace box
Hit Replace All
Ta-da!
It's usually better to go the macro route when finding fields because, as you say, the find algorithm that Word uses doesn't work the way you might hope with fields.
But if you know exactly what the fields contain, you can specify a search pattern that will probably work (however not in wildcard mode).
For example, if you want to look for figure number field pairs such as
{ STYLEREF 1 \s }.{ SEQ Figure \* ARABIC \s 1 }
(which would typically be the same set of fields everywhere in the document)
If you only really need to look for the following:
{ STYLEREF 1 \s }.<any field>
you could ensure that field codes are displayed and search for
^d STYLEREF 1 \s ^21.^d
or
^19 STYLEREF 1 \s ^21.^19
If you need to be more precise, you can spell out the second field as well.
"^d" only works for finding the field beginning, not the field end.
It's a shame that ^w wants to find at least 1 whitespace character because otherwise it would be more robust to look for
^19^wSTYLEREF^w1^w\s^w^21.^19
Perhaps someone else knows how to work around that without using wildcards?
Torzaburo,
I suggest that you do this using a macro. You can start by recording the macro, and later refining your processing steps within the macro.
First turn on the hidden characters by navigating to Home > Paragraph > toggle the show/hide Paragraph symbol. Also, select all and toggle the field codes on (right-click and select "Toggle Field Codes".
Open a new blank Word doc in addition to the one you have open. You will use this later. Start the macro recording and find the field using the "^d" (field code) as you said.
When the field is found, copy only the field text within the brackets, and not the full field reference. While the macro is still recording, ALT + TAB to the new blank document and paste the field code in as plain text.
At this point, do the necessary find & replace processing to the field codes. Highlight the processed field codes, copy, ALT + TAB back to the original document, and paste back between the { } brackets.
Stop the macro recording. Add any further custom processing to the macro VBA.
Select-All and re-toggle the field codes. Update the field codes.
You don't need a macro. Just toggle all field codes on by using Alt+F9. Then do a find and replace for what you want to change. Once the replacement is complete, use Alt+F9 again to toggle the field codes back off.
Disclaimer: I didn't originate this solution, but it's clean and elegant and I thought it should be included here:
(Adapted from Search & Replace Field Codes in Word):
Create or find a single instance of the field you want to convert text to
Toggle Field Codes visible (AltF9)
Copy the code for the field you want to use to the Clipboard (highlight and CtrlC)
Open the Replace dialog box (CtrlH), insert the text you want to replace in the Find What box and then enter ^c in the Replace With box.
This will replace your text with the contents of the Clipboard, turning it into the field code you copied in step 3. It also copies formatting information (font, color, etc.), to control how the field will appear when hidden. (Caveat: I've tested this with Word 2003 under Windows 7 only.)
Coming in late on this, probably way too late for Beth (sorry Beth). And this may not be quite what Beth was looking for. But for anyone interested ...
It sounds like Beth may have created captions throughout the document using INSERT CAPTION (hence the presence of field codes). This means these captions will have been (automatically) created in CAPTION style.
To globally replace the separator "." with " " (space) in such captions, take two steps:
[1] Go to REFERENCES | INSERT CAPTION, then click on NUMBERING and replace the SEPARATOR "." with "EM-DASH". This will replace all separators in captions for the selected label in the CAPTION Window. If you have other labels in use in the document (e.g. FIGURE), select the other labels one by one and repeat this process.
[2] Do a find/replace searching for special character "em-dash" (^+) in style CAPTION, replacing with " ". Click REPLACE ALL.
Voila!
NOTE: This presumes that em-dash does not appear in the caption text anywhere. If it does, then you'll need to do a pre- and post- "fiddle" to ensure these em-dashes are not touched by the global replace above.
The "pre-fiddle" is to do a global find/replace across captions, replacing the em-dash ("^+") with some other string (e.g. "EM-DASH") that doesn't ever occur in any caption's text. Then you do the separator change as described above. Finally, the "post-fiddle" is to restore the em-dashes that were in the captions, by doing a global replace of the string "EM-DASH" with the actual em-dash character "^+".
I have a Crystal Report which is viewed via a CrystalReportViewer control on an .aspx page (using VS2008).
The report has two data-driven FieldObjects (which can contain a variable number of chars) which I would like to display on the same line beside each other.
Problem is when the text in the first FieldObject is too long it overlaps the text in the second FieldObject.
I have tried setting the 'CanGrow=True' and 'MaxNumberOfLines=1' on the first FieldObject to 'push' the second FieldObject further to the right, but this didn't work.
How do I get the second FieldObject to always display immediately after the first FieldObject regardless of the length of the text in the first?
Cheers in advance of any knowledge you can drop.
you can add a text object to the report. And while editing the text of the text object, drag the field you want to show from the object explorer into the text box. Then hit space, then drag the second field in to the same text box. Your two fields will always be one space a part. You could, of course, add more spaces or any other text you want.
Or you can create a function which returns field1 + " " + field2 and add the function to the report.