I'm trying to copy a single file to the "Computer Backups" folder as shown below. The command does not work, even thought the syntax is correct, i.e., "source dest file". I've tried many permutations of this command, different quoting, and still it does not work. I've also tried running it using admin privs, to no avail. My guess is that it is a quoting issue.
robocopy F:\ "C:\Users\ben\OneDrive\Computer Backups" "HP Pavillion to USB_full_b2_s1_v1.tib"
-Thanks
Never mind, the problem was that OneDrive has a file size limit, and this file is 221 GB.
Related
My team faces the need to encrypt all files in a repository with AES256. For this purpose, we decided we are going to zip all files with such encryption, using the same key for all of them.
The problem we have is that these files sit in a NAS, so from windows boxes they are accessible by \ to them.
The directory structure is something like this:
Original Structure:
Root
-1
|--folder1
|---file1.ext
|---file2.ext
|--folder2
|---filea.ext
|---fileb.ext
|--folder2.a
|---filec.ext
and so on...
Essentially, what we need is to have all the original files contained in a zip file, keeping their original names, which would be something like this:
Desired Outcome:
|-Root
|-1
|--folder1
|---file1.zip
|---file2.zip
|--folder2
|---filea.zip
|---fileb.zip
|--folder2a
|---filec.zip
and so on...
To accomplish this, we tried a batch script that calls 7zip, but it only works if it's run from the root directory, which is something we cannot use as the files are not in a server.
Here is the syntax of the batch script we came up with:
FOR /R %%i IN ("*.wmv") DO "C:\Program Files\7-Zip\7z.exe" a -mx0 -tzip -pPasswordHere "%%~dpni.zip" "%%i"
But, as wrote previously, it only works when run from the root folder, which is something we cannot do as files sit on a network location.
Mapping the drive or making a symbolic link to it doesn't do the trick either.
I've also checked on 7zip to do this, namely, making use of its "-r" operator, but I couldn't find a way to get the desired outcome (namely, recurse through all folders in the remote tree structure -there are a lot of them...- and keep the original file name).
I'm open to any suggestions as any kind of script, trick or guizmo that gets the job done will be more than welcome. =)
Thanks a million in advance!,
Sebas.
----SOLUTION----
I actually found a sollution here, mapping the drive in a different way (it's so simple it just made me feel stupid(er), but it's altogheter beautiful).
Using the batch script below, the remote share can be mapped like so:
You can map a drive using
net use X: \\server\directory
and then you can change to that directory using
pushd X:
(Post from which the answer was taken from: Batch File Iterating through files on a local network server)
I have a one liner that is baked into a larger script for some high level forensics. It is just a simple copy-item command and writes the dest folder and its contents back to my server. The code works great, BUT even with the switches:
-Recurse -Force
It is not returning the file with an extension of .dat. As you can guess what I am trying to achieve, I need the .dat file for analysis. I am running this from a privileged account. My only thought was that it is a read/write conflict and the host file was currently utilizing it (or other sys file). What switch am I missing? The "mode" for the file that will not copy over is -a---. Not hidden, just not copying. Suggestions elsewhere have said to use xCopy/robocopy- if possible I do not want to call another dependancy- im already using powershell for the majority of the script, id prefer to stick with it....Any thoughts? Thanks in advance, this one has been tickling my brain for a little...
The only way to copy a file in use is to find the locking handle close it then retry the copy operation(handle.exe).
From your question it looks like you are trying to remotely copy user profiles which includes ntuser.dat and other files that would be needed to keep the profile working properly. Even if you did manage to find a way to unload the dat file(s), you would have to consider the impact that would have on the remote system.
Shadow copy is typically used by backup programs to copy files in use so your best bet would be to find the latest backup of each remote computer and then try to extract the needed files from the backed-up copies or maybe wait for the users to logoff and then try.
if i copy without space (Name Folder),
example:
xcopy /E C:\Test\SQL G:\SQL
this copy all content of my folder, Fine!
i dont know how to copy folder if name contain a space, With "xcopy" command.
i found many reviews about space in command prompt and show me solutions like
c:\>xcopy /E "c:\Documents\SQL Server Management\" "G:\SQL\"
but doesn't work for me.
if I copy a folder where the name contains spaces, the result is: Invalid number of parameters...
Any can help me ?
Tnhks
You should report the error message you are receiving, what happened when you executed he command (if anything) and what you expected to happen.
Your problem is that copy requires a filemask to know which files you require to be copied.
c:>xcopy /E "c:\Documents\SQL Server Management*.*" "G:\SQL\"
specifies that all files with all extensions be copied. The quotes are required to specify "paths\containing spaces" as xcopy (or any other command has no way of reading your mind and can't be certain of what c:\Documents\SQL Server Management\ G:\SQL\ means - is it 'copy c:\Documents\SQL to "Server Management\ G:\SQL\"' or 'copy "c:\Documents\SQL Server" to "Management\ G:\SQL\"' or are sume of what appear to be arguments strays data or what?
Hallo everyone once again,
I did various searches but couldn't gind a suitable/applicable answer to the simple problem below:
On pgAdminIII (Windows 7 64-bit) I am running the following command using SQL editor:
COPY public.Raw20120113 FROM 'D:\my\path\to\Raw CSV Data\13_01_2012.csv';
I tried many different variations for the path name and verified the path, but I keep getting:
ERROR: could not open file "D:\my\path\to\Raw CSV Data\13_01_2012.csv" for reading: No such file or directory
Any suggestions why this happens?
Thank you all in advance
Petros
UPDATE!!
After some tests I came to the following conclusion: The reason I am getting this error is that the path includes some Greek characters. So, while Windows uses codepage 1253, the console is using 727 and this whole thing is causing the confusion. So, some questions arise, you may answer them if you like or prompt me to other questions?
1) How can I permanently change the codepageof the console?
2) How can I define the codepage is SQL editor?
Thank you again, and sorry if the place to post the question was inappropriate!
Try DIR "D:\my\path\to\Raw CSV Data\13_01_2012.csv" from command line and see if it works - just to ensure that you got the directory, file name, extension etc correct.
The problem is that COPY command runs on server so it takes the path to the file from the server's scope.
To use local file to import you need to use \COPY command. This takes local path to the file into account and loads it correctly.
I've been happily using robocopy for backing up my computers to an external usb drive. It's great since it only copies the files that were changed/updated/new. I can take my external drive to any machine and look at it just as if it's another drive on the computer.
I've recently purchased a 750g and another 1tb external hard drives. I ran a robocopy over the weekend that copied about 500g to my external drive. After the copy My Computer shows that ~500g has been used on the external drive. The strange thing is that when I click on the drive in Windows Explorer, nothing shows up in the right pane of Windows Explorer (and the + goes away in the left pane). I copied a single file (drag-and-drop) to this drive and it shows up in Windows Explorer. Command Prompt show the same thing. 1 file.
I know the files are on the drive as it shows up as the Free Space has been reduced.
I read that I should make sure simple file sharing is off, which it is. I also took ownership of the files as Administrator. Still nothing. It works the same on my WIndows XP machine and my Windows 7 Ultimate.
Has anyone else seen this? Or even better, does anyone know what I am doing wrong or how to solve this problem?
thanks!
Bill44077
In my case, the above didn't work.
This worked instead: attrib -h -s -a [ Drive : ][ Path ].
For example: attrib -h -s -a "C:\My hidden folder".
When copying from the root directory of a drive to a folder (non-root directory on a different drive), this can happen.
RoboCopy may set the new directory to hidden, as it copies the system attribute of the root folder of the drive over to the new folder.
You can prevent the new directory from becoming hidden by adding the /A-:SH option/flag/switch to your robocopy command.
See this Server Fault Answer to "Why does RoboCopy create a hidden system folder?
" for more information.
However, this may or may not prevent copying system attributes in other folders, according to this discussion on the Microsoft forum "ROBOCOPY hides destination Directory".
Here is an example taken from my longer, more thorough, Answer on Super User to the Question "How to preserve file attributes when one copies files in Windows?":
Robocopy D:\ C:\D_backup /A-:SH /DCOPY:T /COPYALL /E /R:0 /ZB /ETA /TEE /V /FP /XD D:\$RECYCLE.BIN /XD "D:\System Volume Information" /LOG:C:\D_backup_robocopy.LOG /MIR
However, if you already copied the directory without the /A-:SH option, running the command mentioned by Ricky above (attrib -h -s -a [ Drive : ][ Path ]) will fix the issue by unhiding the directory. Though, I found that -a was not needed.
So in my case, for the example above, attrib -h -s C:\D_backup (without the -a option) made D_backup visible.
Just ran into this issue myself, so it may be a late response and you may have worked it out already, but for those stumbling on this page here's my solution...
The problem is that for whatever reason, Robocopy has marked the directory with the System Attribute of hidden, making it invisible in the directory structure, unless you enable the viewing of system files.
The easiest way to resolve this is through the command line.
Open a command prompt and change the focus to the drive in question (e.g. x:)
Then use the command dir /A:S to display all directories with the System attribute set.
Locate your directory name and then enter the command ATTRIB -R -S x:\MyBackup /S /D where x:\ is the drive letter and MyBackup is your directory name.
The /S re-curses subfolders and /D processes folders as well.
This should clear the Read Only and System attributes on all directories and files, allowing you to view the directory normally.
In addition to the great answers SherylHohman and Ricky left I wanted to add that merely adding the /A-:SH switch for robocopy did not work and the copy created a hidden, system folder on the destination drive.
However, using the /A-:SHA parameter did work and my top level destination directory was not given the system or hidden attributes. Weirdly, my drive does not have the "a" (archived) attribute set so I am dumbfounded as to why this works at all. I do prefer simply removing these attributes to only the root destination folder after completion of the robocopy command per Ricky's suggestion so that these attributes are respected for any sub-directories. Though the /A- switch is easier to manage and (for my backup purposes) are not relevant to any directories I am backing up. You may want to consider not removing the system or hidden attributes if you're backing up your C:\ drive though.
You could try this, I say could, because the whole Windows 10 has annoying flaws everywhere, I have lost trust to Windows 10 and Microsoft.
Well I found that after I robocopied the whole Documents-folder to a root of external drive, I got a folder that is not named Documents but the Documents-folder is renamed&translated to my native language, so it could be some Language issue. (the /XD option tells robocopy to skip a folder)
C:\users\asdf\documents >robocopy . f:\ManuBackup /XD c:\Users\Asdf\Documents\OneDrive /s
File Explorer shows Tiedostot-name (=Documents in finnish) and Command Prompt shows ManuBackup-name. Also I have tried all attrib.exe commands to the ManuBackup-folder, don't trust me 100%