My BPXBATCH step is failing and I can't find the specific RC/RSNC described in M&C. For what it's worth, I had the JCL in an HFS dataset and ran USS's submit command.
Can anyone tell me what I did wrong?
Another clue:
My z/OS system will not allow me to sign into my ID in OMVS (3270 mode through ISPF panels), and simultaneously log in to my id in USS's SSH shell. It gives a resource busy error. The sysadmin claims this is not supported, but I suspect it could be made to be supported.
I've tried to find info on messages and codes, but did not see anything for this specific error.
COPYHFS Step
//COPYHFS EXEC PGM=BPXBATCH
//STDERR DD SYSOUT=*
//STDOUT DD SYSOUT=*
//STDPARM DD *
SH cp
-P "RECFM=FB,LRECL=287,BLKSIZE=6027,SPACE=(TRACK,(1,1))"
/u/woodsmn/SSC.D051721.T200335.S90.CP037
//\'WOODSMN.SSC.D051721.T200335.S90.CP037\'
/*
STDERR DD
FSUM1004 Cannot change to directory </u/woodsmn>
IEF142I WOODSMNX COPYHFS - STEP WAS EXECUTED - COND CODE 3840 (edited)
I cannot see why you got FSUM1004 Cannot change to directory </u/woodsmn>, since you wrote you can change to directoy /u/woodsmn. So I thought I'd try to reproduce your error, but got different one:
cp: FSUM6258 cannot open file "//'Z10411.SSC.D051721.T200335.S90.CP037'": EDC5121I Invalid argument.
After I changed SPACE=(TRACK,(1,1))to SPACE=(TRK,(1,1)) the job completed without error.
The job did run under your userid WOODSMN, didn't it?
Related
I "borrowed" the LPINFOX REXX program from this url: [http://www.longpelaexpertise.com/toolsLPinfoX.php]
When I run it "directly" (EX 'hlq.EXEC(LPINFOX)') it runs fine:
------------------------------------------------------
LPInfo: Information for z/OS ssssssss as of 18 Mar 2021
------------------------------------------------------
z/OS version: 02.04
Sysplex name: LOCAL
JES: JES2 z/OS 2.4 (Node nnnn)
Security Software: RACF
CEC: 3907-Z02 (IBM Z z14 ZR1)
CEC Serial: ssssss
CEC Capacity mmmm MSU
LPAR name: llll
LPAR Capacity mmm`enter code here` MSU
Not running under a z/VM image
But, if I insert the call into another exec, I get a RC -2 from the address LINKPGM call:
------------------------------------------------------
LPInfo: Information for z/OS ssssssss as of 18 Mar 2021
------------------------------------------------------
z/OS version: 02.04
Sysplex name: LOCAL
JES: JES2 z/OS 2.4 (Node N1)
Security Software: RACF
79 - Address Linkpgm 'IWMQVS QVS_Out'
+++ RC(-2) +++
CEC: -
CEC Serial:
LPAR name:
Not running under a z/VM image
I'm sure this has to do with the second level of REXX program running, but what can I do about the error (besides queueing up the EXecution of the second REXX)? I'm also stumped on where this RC is documented...my Google search for "REXX ADDRESS RC -2" comes up short.
Thanks,
Scott
PS(1), per answer from #phunsoft:
Interesting. I didn't copy the code to my other REXX. I invoked LPINFOX from within another rexx: I have a hlq.LOGIN.EXEC that has a "EX 'hlq.LPINFOX.EXEC" statement within it. When I reduce the first exec to "TEST1" (follows), it fails the same way:
/* REXX */
"EXECUTIL TS"
"EX 'FAGEN.LPINFOX.EXEC'"
exit 0
When I run TEST1, this is the output from the EXECUTIL from around the IWMQVS call:
When I run LPINFOX.EXEC directly from the command line, the output is the same, except the address LINKPGM IWMQVS works fine:
I can only surmise that there is some environmental difference when I run the exec "standalone" vs. when I run the exec from another exec.
PS(2), per question about replacing IWMQVS with IEFBR14 from phunsoft:
Changing the program to IEFBR14 doesn't change the result, RC=-2.
LINKPGM is a TSO/E REXX host command environment, so you need to search in the TSO/E REXX Reference. From that book:
Additionally, for the LINKMVS, ATTCHMVS, LINKPGM, and ATTCHPGM
environments, the return code set in RC may be -2, which indicates that processing
of the variables was not successful. Variable processing may have been
unsuccessful because the host command environment could not:
o Perform variable substitution before linking to or attaching the program
o Update the variables after the program completed
Difficult to say what th problem is without seeing the code.
You may want to use REXX's trace feature to debug. Do you run this REXX from TSO/E foreground? If so, you might run TSO EXECUTIL TS just before you start that REXX. It will then run as if trace ?i wa specified as the fist line of the code.
I've had look at the LPINFOX EXEC and saw that variable QVS_Out is set as follows just before linking to IWMQVS:
QVS_Outlen = 500 /* Output area length */
QVS_Outlenx = Right(x2c(d2x(QVS_Outlen)),4,d2c(0))
/* Get length as fullword */
QVS_Out = QVS_Outlenx || Copies('00'X,QVS_Outlen-4)
Did you do this also when you copied the call to your other REXX?
I checked the log file and I think this is the part that caused the problem:
Setting up database
[15:30:54] Configuring pg11 to point to existing data dir D:\John's Files\My Documents\Code\Databases\PostgreSQL\data\pg11
Setting PostgreSQL port
= 5432
Executing C:\Installed Software\Developer Software\PostgreSQLv11.1/pgc config pg11 --datadir "D:\John's Files\My Documents\Code\Databases\PostgreSQL\data\pg11"
Script exit code: 1
Script output: ################################################
# FATAL SQL Error in check_release
# SQL Message = near "s": syntax error
# SQL Statement = SELECT r.component FROM releases r, versions v
WHERE r.component = v.component
AND r.component LIKE '%D:\John's Files\My Documents\Code\Databases\PostgreSQL\data\pg11%' AND v.is_current = 1
################################################
Script stderr: Program ended with an error exit code
Error with configuration or permissions. Please see log file for more information.
Problem running post-install step. Installation may not complete correctly
Error with configuration or permissions. Please see log file for more information.
I think the problem is the apostrophe in "John's". Does anyone know if that's right? Is there a fix to this problem? I don't want to rename my directory because Postgresql can't handle apostrophes.
I have the following problem:
I am using the following command:
EXPORT TO "D:\ExportFiles\ACTIVATE_DICT.csv" OF DEL MODIFIED BY TIMESTAMPFORMAT="YYYY/MM/DD HH:MM:SS" STRIPLZEROS MESSAGES "D:\ExportFiles\FMessage.txt" SELECT * FROM DB2INST4.ACTIVATE_DICT;
In the Command Editor of the program, the Control Center successfully exported data from the ACTIVATE_DICT table to a CSV file ACTIVATE_DICT.csv.
But for a number of reasons, I need you to execute this command in the IBM Data Studio or DataGrip program, and there it cannot be executed in this form.
Therefore, I read the following manual enter link description here
and based on it wrote the following command:
CALL SYSPROC.ADMIN_CMD('EXPORT to /lotus/ExportFiles/ACTIVATE_DICT.csv OF DEL MODIFIED BY TIMESTAMPFORMAT="YYYY/MM/DD HH:MM:SS" STRIPLZEROS MESSAGES /lotus/ExportFiles/FMessage.txt SELECT * FROM DB2INST4.ACTIVATE_DICT');
Here is the message on the result of the command:
[2018-10-11 15:15:23] [ ][3107] There is at least one warning
message in the message file.. SQLCODE=3107, SQLSTATE= ,
DRIVER=4.23.42 [2018-10-11 15:15:23] 1 row retrieved starting from 1
in 75 ms (execution: 29 ms, fetching: 46 ms)
And in the / lotus / ExportFiles / directory there is no ACTIVATE_DICT.csv file and there is no FMessage.txt file in the / lotus / ExportFiles / directory.
Question: How then to correctly execute this command ??? Maybe I'm doing something wrong?
sqlcode 3107 is a warning message:
SQL3107W At least one warning message was encountered during LOAD processing.
Explanation
You can load data into a database from a file, tape, or named pipe using the LOAD command. You can specify that any warnings or errors from the LOAD processing be printed to a message file. If no message file is specified, the warnings or errors are printed to standard out (unless the database manager instance is configured as a partitioned-database environment.)
It is to tell you to read message log in the message file you specified. In your case: /lotus/ExportFiles/FMessage.txt
Please read into the file to see what error is logged and if you need help understand what is logged, please post the content of the file.
This message is returned when at least one warning was received during processing. If a message file is being used, the warnings and errors will be printed there.
This warning does not affect processing.
User response
Review the message file warning.
EXPORT command using the ADMIN_CMD procedure
See use of the 'MESSAGES ON SERVER' clause, and how to get these messages using the result set returned by this routine in this case.
Welcome to the Google Cloud SDK! Run "gcloud -h" to get the list of
available commands.
C:\Program Files (x86)\Google\Cloud SDK>gcloud init Welcome! This
command will take you through the configuration of gcloud.
Your current configuration has been set to: [default]
You can skip diagnostics next time by using the following flag:
gcloud init --skip-diagnostics
Network diagnostic detects and fixes local network connection issues.
Checking network connection...done. Reachability Check passed. Network
diagnostic (1/1 checks) passed.
ERROR: gcloud crashed (UnicodeEncodeError): 'ascii' codec can't encode
character u'\xe7' in position 13: ordinal not in range(128)
If you would like to report this issue, please run the following
command: gcloud feedback
To check gcloud for common problems, please run the following command:
gcloud info --run-diagnostics
I don't know what to do... I just want to use the sdk but I can't init it...
Have a look at the file which gave error , edit the .py file to add following lines
import sys
reload(sys)
sys.setdefaultencoding('utf8')
Try edit the code in google-cloud-sdk/lib/third_party/socks/__init__.py(google-cloud-sdk is the archive you downloaded to install google cloud sdk) in line 262:
req = req + struct.pack(">H", destport)
to
if isinstance(req, unicode):
req = req.encode('UTF-8')
req = req + struct.pack(">H", destport)
reference: https://c11e.wodemo.com/gcloud-crashed-unicodedecodeerror
For me the fix was removing an accent ('é') from a folder in the path of my project. Hope it can help someone since I didn't find this solution after googling it for hours.
I kept getting this similar error every time I ran a gcloud command after a crash:
ERROR: gcloud crashed (UnicodeDecodeError): 'utf8' codec can't decode byte 0xa4 in position 1: invalid start byte
The solution was to delete this file:
~/.config/gcloud/gce
Don't ask me why that works or what that files does, I don't know (if you do, please let me know), but it gets recreated on the next command run and it fixed my issue.
In my case, it was a special character in the folders of the current directory. After changing the current directory, it worked!
As you’ve noticed that the error is due to a non-ASCII character in the username. As a workaround, you can set the CLOUDSDK_CONFIG environment variable to a path that contains only ASCII characters.
I installed moodle 1.9.12 and now I want to use Algebra notation in content. I enable "TeX Notation" and "Algebra Notation" in administrator panel and also install mimetext and dvips and Imagemagic on the server. fortunately Tex Notation works fine but I got the following error for Algebra:
sh: /var/www/html/moodle/filter/tex/mimetex.linux: not found
The shell command
"/var/www/html/moodle/filter/tex/mimetex.linux" -e "/var/www/moodledata/filter/algebra/de06d6c44d98ba4e42dffca988bf530b.gif" -- '\Large \frac{\sin\left(z\right)}{x^{2}+y^{2}}'
returned status = 127
File size of mimetex executable /var/www/html/moodle/filter/tex/mimetex.linux is 830675
The file permissions are: 100775
The md5 checksum of the file is 56bcc40de905ce92ebd7b083c76e019e
Image not found!
Note: /var/www/html/moodle/filter/tex/mimetex.linux exists on the server and is executable!!!
What is the problem?? Any idea?????
From what you have described, calling the general tex filter debug page works and does not show up the same error.
/filter/tex/texdebug.php works, but /filter/algebra/algebradebug.php does not.
If this is the case, perhaps you could check for an open_basedir, or safe_mode_exec_dir being set to include the current working directory, or otherwise restricting the execution of /var/www/html/moodle/filter/tex/mimetex.linux, while the current working directory is /var/www/html/moodle/filter/algebra.
You could look at this by visiting /admin/phpinfo.php at your site, and look carefully at the effective values of open_basedir, safe_mode and safe_mode_exec_dir.
You could also check the apache error log or add the following lines to the top of the algebra debug php file, and you might see some extra error messages:
$CFG->debug = 6143 ;
$CFG->debugdisplay= 1 ;
Hope that helps