I get the following Error while installing it in ubuntu..
(anaconda3) aamir#coder:~$ conda install --channel https://conda.anaconda.org/menpo opencv3
Collecting package metadata (current_repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: failed with repodata from current_repodata.json, will retry with next repodata source.
Collecting package metadata (repodata.json): done
Solving environment: failed with initial frozen solve. Retrying with flexible solve.
Solving environment: |
Found conflicts! Looking for incompatible packages.
This can take several minutes. Press CTRL-C to abort.
failed
UnsatisfiableError: The following specifications were found
to be incompatible with the existing python installation in your environment:
Specifications:
opencv3 -> python[version='2.7.|3.4.|3.5.|3.6.']
Your python: python=3.7
If python is on the left-most side of the chain, that's the version you've asked for.
When python appears to the right, that indicates that the thing on the left is somehow
not available for the python version you are constrained to. Note that conda will not
change your python version to a different minor version unless you explicitly specify
that.
The following specifications were found to be incompatible with your system:
feature:/linux-64::__glibc==2.31=0
feature:|#/linux-64::__glibc==2.31=0
Your installed version is: 2.31
Related
I'm quite new to neovim and mostly use it for simple c++ development. Love the motions and customizability, however I cannot find what I'm doing wrong when trying to install the clang-formatter using Mason plugin.
Using the visual interface provided by Mason I navigate to the 'formatter' section, position my cursor on the clang-formatter option and press I. It starts something but always fails with the same error message:
Mason Error Message
(I get the same error when installing linters)
So far installing LSP's has been no problem, and I've tried to google what the 'Error: name cmd not found' meant but haven't found anything that seems related.
I've made sure to update both my python3 and python3-pip packages. I believe that the virtual environment package became standard since python3.3 so I haven't installed that separately.
':checkhealth mason' output
My Check Health
If anybody has experienced something similar I'd love to hear how you've solved it!
Did you installed pynvim? It is what makes the bridge between neovim and python stuff I guess, it is optional to have it but could fix your issue. My healthcheck looks like this :
provider: health#provider#check
========================================================================
## Clipboard (optional)
- OK: Clipboard tool found: xclip
## Python 3 provider (optional)
- INFO: `g:python3_host_prog` is not set. Searching for python3 in the environment.
- INFO: Multiple python3 executables found. Set `g:python3_host_prog` to avoid surprises.
- INFO: Executable: /usr/bin/python3
- INFO: Other python executable: /bin/python3
- INFO: Python version: 3.8.10
- INFO: pynvim version: 0.4.3
- OK: Latest pynvim is installed.
To install pynvim (in your shell):
pip3 install pynvim
i'm using poetry version 1.2.2 and python 3.11
I want to read the sql query using polars like pl.read_sql()
but it requires the connectorx library.
I am able to install that library using pip install connectorx but poetry add connectorx is giving this error:
RuntimeError
Unable to find installation candidates for connectorx (0.3.1)
at ~\AppData\Local\Programs\Python\Python311\Lib\site-packages\poetry\installation\chooser.py:103 in choose_for
99│
100│ links.append(link)
101│
102│ if not links:
→ 103│ raise RuntimeError(f"Unable to find installation candidates for {package}")
104│
105│ # Get the best link
106│ chosen = max(links, key=lambda link: self._sort_key(package, link))
107│
Tried clearing the cache of poetry
Tried adding into pyproject.toml
connectorx neither provide a wheel file for python 3.11 nor a source distribution from which a wheel could be build. See https://pypi.org/project/connectorx/#files
So there is no way to install it on python 3.11
I trying to get the IBM Blockchain platform to work in Visual studio code (on Linux), but it keeps coming back with:
Could not rebuild native dependencies Failed to execute command "npm" with arguments
"rebuild, grpc, --target=6.1.5, --runtime=electron, --update-binary, --fallback-to-build, --
target_arch=x64, --dist-url=https://atom.io/download/electron" return code 1. Please ensure
that you have node and npm installed
I have node and npm installed
node -v
v10.17.0
and
npm -v
6.11.3
satisfying the constraints. I have visual studio code version 1.41.1. What could be thie issue?
The problem you are experiencing is described in this issue https://github.com/IBM-Blockchain/blockchain-vscode-extension/issues/1621
The issue is that there are no pre-built versions of grpc used by the fabric node sdk for electron 6 currently and due to changes in newer versions of gcc the grpc node module fails to compile when it falls back to using source because of no pre-built versions
The easiest solution is to downgrade for vscode 1.39 and install the extension.
Alternative options are to install gcc version 7 and make that the default in your linux environment or you could install a version of linux that has gcc version 7 as the default for example ubuntu 18.04 (which would allow grpc to compile from source)
I have noticed a number of similar questions on stackoverflow, but none that really helped me with my current challenge. I have been attempting to install eric6 on my Raspberry Pi setup. And then I encountered the following messages:
Checking dependencies
Python Version: 3.6.8
PyQt5 could not be detected.
Error: No module named 'PyQt5.sip'
Shall 'PyQt5' be installed using pip? (Y/n) Y
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: PyQt5 in /usr/local/lib/python3.6/site-packages (5.12)
Sorry, please install PyQt5.
Error: No module named 'PyQt5.sip'
And when I attempt to use the pip list to look at what has been installed (as I previously already managed to make and install the PyQt5 from source code):
Package Version
---------- -------
pip 19.0.3
PyQt5 5.12
setuptools 40.6.2
sip 4.19.14
So, how do I overcome the issue that I am currently facing? By the way, I am using the following command when attempting to install eric6:
python3 install.py
Thought you might need to know that if it helps.
Python 3.6 isn't available in any Raspbian distribution, so I assume you installed this yourself. You can't install an out-of-distribution Python version and expect distribution Python packages to work. You have PyQt5 installed, yes, but it's the version of PyQt built for Python 3.5 (I'm assuming you're on Raspbian Stretch).
Sometimes you can install Python libraries with pip, and in theory that could work to install the correct version of PyQt for your version of Python, but PyQt only provides wheels for x86 on PyPI, not for Arm, so PyQt is not pip installable on the Pi. The only way to get PyQt on Raspberry Pi is via apt, where your choices are Jessie (old stable - with Python 3.4), Stretch (current stable - with Python 3.5), and Buster (unstable/testing - with Python 3.7). If there's a need for Python >3.5, your best bet is to try upgrading to Buster, but bear in mind it's not ready for release yet.
Does anyone know if it is possible to install lustre client software on a linux machine that has kernel 4+? From what I have experimented so far, all the working examples are on kernel 3.10. And if I try to install kmod-luster-client on 4+ machine, it fails with:
rpm -ivh kmod-lustre-client-2.10.5-1.el7.x86_64.rpm
error: Failed dependencies:
kernel < 3.10.0-863 is needed by kmod-lustre-client-2.10.5-1.el7.x86_64
kernel(PDE_DATA) = 0x44f0d59d is needed by kmod-lustre-client-2.10.5-1.el7.x86_64
According to lustre/ChangeLog in the b2_10 branch, it works with kernels at least 4.4.133-94.33 (SLES12SP3) and 4.4.0-131 (Ubuntu 16.04).
If you are using a newer kernel, you also need to use a newer version of Lustre. The lustre/ChangeLog on the tip of master (almost 2.12 release) reports support for kernels 4.15.0-32 (Ubuntu 18.04).
It looks like you are trying to install a binary kernel module RPM built for the RHEL7 kernel on a non-RHEL kernel. That is never going to work. You need to either get the right RPMs/Debs for your kernel from https://lustre.org/download/ or download the source and rebuild it for your kernel.
The 2.10.x kernels are currently the LTS maintained releases (bugfixes backported to that release), while 2.11.0 is a feature release that does not have bugfixes backported.