I'm searching for compare two date in AIX.
This is the first date in yyyyMM format:
three_months_ago=$(( $(date +%Y%m) - 3))
And I get the second date from filesystem with concatenation of folder name:
for dir in /p22_satos/satos/data/*
do
echo ${dir}
year=$(basename ${dir})
if [[ $dir = "/p22_satos/satos/data/static" ]];
then
print "Static dir should not be deleted"
else
for subdir in ${dir}/*
do
echo ${subdir}
month=$(basename ${subdir})
if [ $month -ge 10 ];
then
echo ${year}${month}
echo $three_months_ago
if [ ${year}${month} -ge $three_months_ago ];
then
echo "The directory should not be deleted"
else
echo "The directory should be deleted"
fi
else
echo ${year}"0"${month}
echo $three_months_ago
if [ ${year}"0"${month} -ge $three_months_ago ];
then
echo "The directory should not be deleted"
else
echo "The directory should be deleted"
fi
fi
#rm -f $subdir
done
fi
The value for $three_months_ago is 202103.
I've folder 2020 with subfolder 12, so the cycle make 202012 date dynamically.
Why ${year}${month} and ${year}"0"${month} are always greater than $three_months_ago and the if [ ${year}${month} -ge $three_months_ago ] fails?
three_months_ago=$(date --date=#$(( $(date +%s) - (3 * 30 * 24 * 3600) )) +%Y%m)
date +%s: give the current date in seconds since 01/01/1970
3 * 30 * 24 * 3600: number of seconds during 90 days
date --date=#<seconds>: calculate date from a number of seconds since 01/01/1970
+%Y%m: output format
Related
#!/bin/sh
if [ $# -lt 2 ]
then
echo "Usage $0 servername envtype"
exit 1
fi
servername=$1
envtype=$2
srv=echo $servername | tr "a-z" "A-Z"
srvtype=echo $envtype | tr "a-z" "A-Z"
echo $srv
echo $srvtype
if [ "${srv}" <> "SCP" ];
then
if [" ${srv}" <> "RENTD" ];
then
echo "Invalid servername"
exit 1;
fi
fi
I am getting this error when running the shell script
[ 2 -lt 2 ]
servername=scp
envtype=prd
echo scp
tr a-z A-Z
srv=SCP
echo prd
tr a-z A-Z
srvtype=PRD
echo SCP
SCP
echo PRD
PRD
[ SCP ]
[ SCP ]
/tmp/testupper.sh: 19: [ SCP: not found
Found my issue.
[" ${srv}" <> "RENTD" ]
there is a space being prefixed to the srv variable, between the " and the $: " ${srv}"
Write a program using ‘While Loop’ that will accept 6 integers from user
within the range of 6 to 60 and will calculate the Sum of all the inputted
numbers. If the user enters any other value that doesn’t fall into the range of 6-60,
an appropriate error message should be shown, and the program should
ask for input again.
COUNTER=1
sum=0
while [ $COUNTER -lt 7 ]; do
echo Enter value $COUNTER
read value
if [ $value -lt 61 -a $value -gt 7 ]
then
let sum=value+sum
let COUNTER=COUNTER+1
else
echo "Error"
fi
done
echo The sum is $sum
Trying to create a condition based on whether the line starts with an "!".
Note: this is sh not bash
#!/bin/sh
if [ $line = "!*" ] ;
then
echo "$0: $line has !"
else
echo "$0: $line has no !"
fi
In POSIX test, = performs exact string comparisons only.
Use a case statement instead.
case $line in
"!"*) echo "$line starts with an exclamation mark" ;;
*) echo "$line does not start with an exclamation mark" ;;
esac
If you really want to put this in an if, you can do that:
if case $string in "!"*) true;; *) false;; esac; then
echo "$line starts with an exclamation mark"
else
echo "$line does not start with an exclamation mark"
fi
You can use the standard POSIX parameter substitution syntax.
${var#repl} will remove the repl from the beginning of the content of the $var variable.
So, you'll have:
$ var=test
$ echo ${var#t}
est
$ echo ${var#X}
test
So, in order to have a simple if statement to check if a variable starts with a string (! in your case), you can have:
#!/bin/sh
if test "$line" = "${line#!}"; then
echo "$0: $line has no !"
else
echo "$0: $line has !"
fi
PS: test ... is equivalent to [ ... ], so the above script is exactly the same as
#!/bin/sh
if [ "$line" = "${line#!}" ]; then
echo "$0: $line has no !"
else
echo "$0: $line has !"
fi
Could be as simple as echo "$STR" | cut -c -1.
#!/bin/sh
STR="!abcd"
if [ "!" = $(echo "$STR" | cut -c -1) ]; then
echo "true"
fi
I have a shell script which passes the some variables to perl script, named Deploy.pl. But it seems perl script is not picking the variable. I have been trying to find out the cause but unable to resolve it. Same variables are getting passed to perl script properly except the $entname variable. Same varibale i am using for my copy statement,but as it is not getting picked up by perl script i am getting an cannot find path error. Please have a look at both shell script and perl script. I know it's insane to put such a long script,but i want to give clear idea about what is happening with the script.
Shell Script:
#!/bin/bash
sleep 1
echo "##### Please Read the following information carefully ####"
sleep 2
echo "Please read this preamble in order to run the script. It states the adamant requirement that user needs to have while executing the script."
echo " "
echo "1. The script requires the user name(i.e. TIBID ) which should have SVN access in order to execute it successfully. Example: ./deploy.sh tib7826"
echo " "
echo "where tib7826 is the user who has SVN access. Make sure the tibid you are using should have full SVN access."
echo " "
echo "2. The script further requires the Internal name as input. MDM creates a directory in the MQ_COMMON_DIR with internal name.It is"
echo " "
echo "case-sensitive and should be exact as what it is there in MQ_COMMON_DIR."
echo " "
echo "3. Further it asks for envoirnment name. The Environment name should be like DEV1,DEV2,DEV3,TEST1,TEST2 etc.Make sure they too are case specific."
echo "Otherwise it will fail to execute further steps."
echo " "
echo " 4. The script requires CATALOG ID's as a input for the below 4 repositories"
echo " "
echo " a.ITEM_MASTER"
echo " "
echo " b.DISTRIBUTION_FACILITY_LV"
echo " "
echo " c.MANAGEMENT_DIVISION_SOI"
echo " "
echo " d.ALTERNATE IDENTIFICATIONS"
echo " "
echo "You will get those ID's from MDM Web UI. Login to the MDM UI. Go to Item Data==>Repositories==>ID Column."
echo " "
echo "5. For more detail read the Readme.txt in order to execute this script.Take it from the location"
echo " "
echo "/tibco/data/GRISSOM2/build_deploy_scripts_kroger/document"
echo " "
echo " Or else take the ReadMe form SVN."
echo " "
echo "If you agree to execute the script press Y else N."
read uinput
if [ $uinput == 'Y' ]; then
echo "Script will execute!!"
sleep 3
else
echo "You have Cancel the Agreement"
exit
fi
# sample command to execute the deploy script ./deploy.sh tib7777
# export the build root
export BUILD_ROOT=/tibco/data/GRISSOM2
# CUSTOM env variables are temporary and set directly in the script to execute custom tasks
export CUSTOM1=/tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/rulebase
cd $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common
echo "--- - - - - - - - - - - - - - - "
echo "Enter your Enterprise INTERNAL NAME:"
sleep 1
read internal_name
sleep 2
echo "Enter Enterprise Name"
read entname
#code to check if the Enterprise with the correct INTERNAL name exists
if [ -d "$MQ_COMMON_DIR/$internal_name" ]; then
echo "Artifacts for the $internal_name will be deployed"
else
echo "THE ENTERPRISE with the $internal_name doesn't seems to be correct INTERNAL NAME. Execute the script again with the correct INTERNAL NAME"
exit
fi
#This snippet will cleanup the existing MDR_ITME_E1 before we get the latest code for MDR_ITME_E1 enterprise from SVN
cd $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common
if [ -d "$entname" ]; then
rm -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/$entname
echo "Removing existing $entname from SVN source directory.."
echo "..."
sleep 1
echo "...."
sleep 1
echo "....."
sleep 1
else
echo "$entname Doesn't Exist for the first time"
fi
echo "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%"
echo "Retrieving Latest Code from SVN..."
sleep 2
echo "Please wait......"
echo "Connecting to SVN."
sleep 1
echo "Connecting to SVN.."
sleep 1
echo "Connecting to SVN..."
sleep 1
echo "Connecting to SVN...."
sleep 1
echo "Connecting to SVN....."
sleep 1
echo "Connecting to SVN......"
sleep 1
echo "Connecting to SVN......."
sleep 1
echo "Connecting to SVN........"
echo "Do you want to checkout the latest version of the COMMON DIR code [Y] or [N]"
read svninput
if [ $svninput == 'Y' ]; then
echo "Downloading SVN Code"
if [ $entname == 'MDR_ITEM_E1' ]; then
echo svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_Development/common/MDR_ITEM_E1
svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_Development/common/MDR_ITEM_E1
sleep 3
else
echo "Copying E2 code"
echo svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_breakfix/common/MDR_ITEM_E2
svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_breakfix/common/MDR_ITEM_E2
fi
else
echo "Enter the revision number of the common directory"
read revision
if [ $entname == 'MDR_ITEM_E1' ]; then
svn co --username $1 -r $revision http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_Development/common/MDR_ITEM_E1
else
echo "E2 Code"
svn co --username $1 -r $revision http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_breakfix/common/MDR_ITEM_E2
fi
echo "Loaded code for Enterprise"
fi
if [ -d $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/$entname ] ; then
echo "Downloaded latest code from SVN!!"
else
echo "CODE has not been downloaded. Please check your credentials."
exit
fi
#echo svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_Development/common/MDR_ITEM_E1
#svn co --username $1 http://svn.kroger.com/repos/mercury/tibcomdm/cim_paris/branches/Grissom2_Development/common/MDR_ITEM_E1
echo "========================================"
echo "Taking destination organization backup...wait"
cd $MQ_COMMON_DIR/$internal_name
chmod -Rf 777 $MQ_COMMON_DIR/$internal_name
sleep 2
cp -rf /$MQ_COMMON_DIR/$internal_name /$MQ_COMMON_DIR/$internal_name$( date +%d%m%Y%H%M )
echo "backup done!!"
chmod -Rf 775 $MQ_COMMON_DIR/$internal_name *
echo "========================================"
#Removing contents inside the workflow,forms,maps,rules,rulebase,schema,templates,inputmap
sleep 2
echo "Removing contents inside workflow,inputmap,rules......"
echo "."
sleep 1
echo ".."
sleep 1
echo "..."
sleep 1
if [ -d "$MQ_COMMON_DIR/$internal_name" ]; then
# cleanup the enterprise internal directories
rm -rf $MQ_COMMON_DIR/$internal_name/workflow/*
rm -rf $MQ_COMMON_DIR/$internal_name/forms/*
rm -rf $MQ_COMMON_DIR/$internal_name/rulebase/*
rm -rf $MQ_COMMON_DIR/$internal_name/maps/*
rm -rf $MQ_COMMON_DIR/$internal_name/templates/*
else
echo "THE ENTERPRISE with the $internal_name internal name does not exist. Execute the script with the correct INTERNAL NAME"
exit
fi
sleep 2
echo "The following folders[workflow, forms, rulebase, maps, templates] have been cleaned up in the Enterprise common directory"
cd $MQ_COMMON_DIR/$internal_name
echo "Inside internal enterprise"
echo "-------------"
echo "InputMap,Schema,Scheduler,Distributedlock...Creating!!"
sleep 2
if [ -d "inputmap" ] && [ -d "schema" ] && [ -d "scheduler" ] && [ -d "distributedlock" ]; then
echo "Copying the directory structure"
echo "inputmap, schema,scheduler,distributedlock exists!!"
else
mkdir inputmap
mkdir schema
mkdir scheduler
mkdir distributedlock
chmod 775 *.*
sleep 1
echo "Required additional directories have been created!"
fi
#Enter Environment Name:
echo "Options: Which Enviroment you want to Deploy 1.DEV1 2.DEV2 3.DEV3 4.TEST1 5.TEST2 6.E2E 7.STAGE 8.PRODUCTION"
echo "Enter Environment Name:"
read env_name
if [ $env_name == DEV1 -o $env_name == DEV2 -o $env_name == DEV3 -o $env_name == TEST1 -o $env_name == TEST2 -o $env_name == E2E -o $env_name == STAGE -o $env_name == PRODUCTION ] ; then
echo "Running"
else
echo "You Entered wrong Environment Name!! Enter correct environment name and run the script again."
exit
fi
#Input catalog ID's==specific to E1 enterprise code only
if [ $entname == 'MDR_ITEM_E1' ]; then
echo "Enter Catalog ID's to copy the CV and Catalogvalidation files"
echo "Enter Catalog ID For ITEM_MASTER"
read item
if [ -d "$MQ_COMMON_DIR/$internal_name/catalog/master/$item" ]; then
echo "renaming existing catalogvalidation.xml as a backup copy"
cd $MQ_COMMON_DIR/$internal_name/catalog/master/$item
mv catalogvalidation.xml catalogvalidation.xml$( date +%d%m%Y%H%M )
else
echo "Either directory or file does not exist"
fi
echo "Enter Catalog ID For DISTRIBUTION_FACILITY_LV"
read dflv
if [ -d "$MQ_COMMON_DIR/$internal_name/catalog/master/$dflv" ]; then
echo "renaming existing catalogvalidation.xml as a backup copy"
cd $MQ_COMMON_DIR/$internal_name/catalog/master/$dflv
mv catalogvalidation.xml catalogvalidation.xml$( date +%d%m%Y%H%M )
else
echo "Either directory or file does not exist"
fi
echo "Enter Catalog ID For MANAGEMENT_DIVISION_SOI"
read mds
if [ -d "$MQ_COMMON_DIR/$internal_name/catalog/master/$mds" ]; then
echo "renaming existing catalogvalidation.xml as a backup copy"
cd $MQ_COMMON_DIR/$internal_name/catalog/master/$mds
mv catalogvalidation.xml catalogvalidation.xml$( date +%d%m%Y%H%M )
else
echo "Either directory or file does not exist"
fi
echo "Enter Catalog ID For ALTERNATE_IDENTIFICATION_MVL"
read aim
if [ -d "$MQ_COMMON_DIR/$internal_name/catalog/master/$aim" ]; then
echo "renaming existing catalogvalidation.xml as a backup copy"
cd $MQ_COMMON_DIR/$internal_name/catalog/master/$aim
mv catalogvalidation.xml catalogvalidation.xml$( date +%d%m%Y%H%M )
else
echo "Either directory or file does not exist"
fi
echo "Copying CV Files"
cp -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/catalog/master/34731_ITEM_MASTER/cv_* $MQ_COMMON_DIR/$internal_name/rulebase/
cp -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/catalog/master/34800_DISTRIBUTION_FACILITY_LV/cv_* $MQ_COMMON_DIR/$internal_name/rulebase/
cp -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/catalog/master/34800_DISTRIBUTION_FACILITY_LV/DISTRIBUTION_FACILITY_LV.xml $MQ_COMMON_DIR/$internal_name/rulebase/
cp -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/catalog/master/34801_MANAGEMENT_DIVISION_SOI/cv_* $MQ_COMMON_DIR/$internal_name/rulebase/
#cp -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/catalog/master/ALTERNATE_IDENTIFICATION_MVL/cv_* $MQ_COMMON_DIR/$internal_name/rulebase/
sleep 3
echo "....."
sleep 1
echo "......."
sleep 1
echo "........."
echo "Copied CV files"
#Copying E2 Specific Code--Customized Files
else
#Copy E2 files
sleep 3
echo "Running the Deploy.pl..."
sleep 4
fi
# run the deploy script
cd $BUILD_ROOT/build_deploy_scripts_kroger/deploy_script
./Deploy.pl $env_name $item $dflv $mds $aim MDR_ITEM_E2 $internal_name
# custom code changes
# custom1 to change the rulebase URLs
echo " "
echo " "
echo "********************"
echo "========================================"
if [ $entname == 'MDR_ITEM_E1' ]; then
echo "Copying schema for $internal_name internal enterprise name"
if [ $env_name == DEV3 -o $env_name == TEST2 -o $env_name == DEV2 ]; then
echo "Copying $env_name schema"
cd /tibco/mdm/8.3/common/$internal_name/schema/
rm *.*
cp /tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/schema/TEST2/* /tibco/mdm/8.3/common/$internal_name/schema/
else
if [ $env_name == E2E ]; then
echo "Copying schema for $env_name environment!!"
cd /tibco/mdm/8.3/common/MDRITME1/schema/
rm *.*
cp /tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/schema/E2E/* /tibco/mdm/8.3/common/$internal_name/schema/
else
echo "Incorrect environment name"
exit
fi
fi
echo "========================================="
else
echo "E2 code is deploying..."
fi
if [ $entname == 'MDR_ITEM_E1' ]; then
echo "Do you want to copy DropZone press Y to continue else N"
read dr
if [ "$dr" == 'Y' ]; then
echo "Copying DropZone"
cp -rf /tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/DropZone/* $MQ_COMMON_DIR/$internal_name/DropZone/
echo "Copied DropZone"
sleep 1
else
echo "either folder doesn't exist in $internal_name or You have cancelled the copy opeeation for DropZone"
fi
echo "Do you want to copy EAI press Y to continue else N"
read eai
if [ "$eai" == 'Y' ]; then
echo "Copying EAI"
cp -rf /tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS/common/MDR_ITEM_E1/EAI/* $MQ_COMMON_DIR/$internal_name/EAI/
echo "Copyied EAI"
sleep 1
else
echo "either folder doesn't exist in $internal_name or You have cancelled the copy opeeation for DropZone"
fi
else
echo "#$%#$%#$%#$%#$%&*^&*##$"
fi
cd $MQ_COMMON_DIR/$internal_name
echo "****** The following directories have been deployed to your Enterprise Internal directory ********"
echo " "
echo "======================================"
ls | tee -a
echo "======================================="
#change the permissions back to standard on the internal directory
#chmod -Rf 775 $MQ_COMMON_DIR/$internal_name
cd $MQ_COMMON_DIR/$internal_name
chmod -Rf 644 *
cd $MQ_COMMON_DIR/$internal_name
find . -type d -exec chmod 0755 {} \;
cd $MQ_COMMON_DIR/$internal_name
chmod -Rf 777 EAI
chmod -Rf 777 DropZone
chmod -Rf 777 distributedlock
echo "Permissions changed!"
echo "========================================"
echo " "
echo " "
echo " "
echo "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%"
echo "Deployed resources successfully"
echo "%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%"
echo " "
echo " "
exit
Perl script:
#!/usr/bin/perl
use CIMDeploymentVaribles;
&main;
sub main()
{
print "\n Deployment Script \n\n\n";
#print "Options: Which Enviroment you want to Deploy\n 1.DEV1\n 2.DEV2\n 3.TEST1\n 4.TEST2\n 5.STAGE\n 6.PRODUCTION \n\n";
$dep_env = $ARGV[0];
$item_master = $ARGV[1];
$distribution_facility_lv = $ARGV[2];
$management_division_soi = $ARGV[3];
$altername_identification_mvl = $ARGV[4];
$entname = $ARGV[5];
$internal_name = $ARGV[6];
$SVN_COMMON_DIR_LOCATION = "/tibco/data/GRISSOM2/DEPLOYMENT_ARTIFACTS";
$SCRIPT_LOCATION = "$SVN_COMMON_DIR_LOCATION/build_deploy_scripts_kroger/deploy_script";
if ($dep_env eq 'DEV1' || $dep_env eq 'DEV2'|| $dep_env eq 'TEST1' || $dep_env eq 'TEST2' || $dep_env eq 'STAGE'|| $dep_env eq 'PRODUCTION' || $dep_env eq 'LOCALDEV1' || $dep_env eq 'MAHANADI'|| $dep_env eq 'DEV3' || $dep_env eq 'E2E')
{
print "\n Deployment on Environment:: $dep_env\n";
&Set_Environment_Variables($dep_env);
&display_variables($dep_env);
&Deploy_Common_dir_artifacts($dep_env);
}
else
{
print "\nWrong argument is passed\n";
print " \n Provide valid argument: DEV1 or DEV2 or TEST1 or TEST2 or STAGE or PRODUCTION\n\n";
exit;
}
}
sub display_variables()
{
print "\n Displaying Variables Start\n";
print "\n MQ_HOME on $_[0] :: $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}\n";
print "\n MQ_COMMON_DIR on $_[0] :: $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}\n";
print "\n ENTERPRISE_INTERNAL_NAME in $_[0] :: $ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}\n";
print "\n SCRIPT_LOCATION in $SCRIPT_LOCATION\n";
print "\n SVN_COMMON_DIR_LOCATION in $SVN_COMMON_DIR_LOCATION\n";
print "\n Displaying Variables Ended \n";
}
sub Set_Environment_Variables()
{
print "\n Setting up environment Variables\n";
$ENV{"MQ_HOME"}="$ENV_Variables{\"$_[0]\"}{'MQ_HOME'}";
$ENV{"MQ_COMMON_DIR"}="$ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}";
print "\nEnvironment Variables are set\n";
}
sub Deploy_Common_dir_artifacts()
{
print "\n Deploying common dir aftifacts for $_[0] environment \n";
print "\nDeploying common dir artifacts to specific enterprise ( $ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'} ) \n";
print "Command: rm -rf `find $SVN_COMMON_DIR_LOCATION -type d -name .svn`";
system("rm -rf `find $SVN_COMMON_DIR_LOCATION -type d -name .svn`");
# Deploying forms
print "\n 1. Deploying forms \n";
print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/common/$entname/forms/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/forms/\n";
system("cp $SVN_COMMON_DIR_LOCATION/common/$entname/forms/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/forms/");
# Deploying maps
print "\n 2. Deploying maps \n";
print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/common/$entname/maps/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/maps/ \n";
system("cp $SVN_COMMON_DIR_LOCATION/common/$entname/maps/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/maps/");
# Deploying rulebase
print "\n 3. Deploying rulebase \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/rulebase/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/rulebase/\n";
system("cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/rulebase/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/rulebase/");
print "\n\n Executing ::: find $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/rulebase/* -type f -exec sed -i 's/$internal_name/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/' {} \\;";
system("find $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/rulebase/* -type f -exec sed -i 's/$internal_name/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/' {} \\;");
# Deploying workflow
print "\n 4. Deploying workflow \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/workflow/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/workflow/\n";
system("cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/workflow/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/workflow/");
print "\n\n Executing ::: find $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/workflow/* -type f -exec sed -i 's/MDR_NEW/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/' {} \\;";
system("find $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/workflow/* -type f -exec sed -i 's/$internal_name/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/' {} \\;");
# Deploying htmlprops
print "\n 6. Deploying htmlprops \n";
# print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/common/$entname/htmlprops/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/htmlprops/\n";
#system("cp -rf $SVN_COMMON_DIR_LOCATION/common/$entname/htmlprops/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/htmlprops/");
# Deploying templates
print "\n 7. Deploying Templates \n";
print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/common/$entname/templates/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/templates/\n";
system("cp $SVN_COMMON_DIR_LOCATION/common/$entname/templates/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/templates/");
# Deploying Schedular
print "\n 8. Deploying scheduler \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/scheduler $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/\n";
#system("cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/scheduler/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/scheduler/");
# Deploying Filewatcher
print "\n 9. Deploying Filewatcher \n";
print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/config/FileWatcher.xml $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/config/\n";
system("cp $SVN_COMMON_DIR_LOCATION/config/FileWatcher.xml $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/config/");
# Deploying Custom Properties
# print "\n 5. Deploying Custom Properties \n";
# print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/custom/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/custom/\n";
# system("cp -r $SVN_COMMON_DIR_LOCATION/custom/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/custom/");
# Deploying dynservices
print "\n 10. Deploying dynservices \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/dynservices $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/\n";
#system("cp -r $SVN_COMMON_DIR_LOCATION/dynservices $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/");
# Deploying InputMap
print "\n 12. Deploying InputMap \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/inputmap/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/inputmap/\n";
#system("cp -r $SVN_COMMON_DIR_LOCATION/schema/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/schema/");
system("cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/inputmap/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/inputmap/");
# Deploying DistributeLock
print "\n 13. Deploying DistributedLock \n";
print "\nExecuting::: cp -r $SVN_COMMON_DIR_LOCATION/distributedlock/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/distributedlock/\n";
#system("cp -r $SVN_COMMON_DIR_LOCATION/schema/* $ENV_Variables{\"$_[0]\"}{'MQ_HOME'}/schema/");
system("cp -r $SVN_COMMON_DIR_LOCATION/common/$entname/distributedlock/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/distributedlock/");
}
Failure: print "\nExecuting::: cp $SVN_COMMON_DIR_LOCATION/common/$entname/forms/* $ENV_Variables{\"$_[0]\"}{'MQ_COMMON_DIR'}/$ENV_Variables{\"$_[0]\"}{'ENTERPRISE_INTERNAL_NAME'}/forms/\n";
As $entname is not picked up it's not copying expected files.
You really need to start quoting your scripts propertly:
rm -rf $BUILD_ROOT/DEPLOYMENT_ARTIFACTS/common/$entname
Imagine I enter MDR_ITEM_E1 /. The command would now delete all the files on your disk.
I have a list of files named filename.${date}, for example foo.20121102 and I want to print the last modified file that has the timestamp up to today using bash toolset.
Using the shell like you ask :
for i in *; do
if stat -c %y "$i" | grep -q "^$(date +%Y-%m-%d)"; then
echo "$i has been modified or created today"
else
echo "$i has NOT been modified or created today"
fi
done
# 24 hours * 60 minutes/hour * 60 seconds/minute
$threshhold = 86400;
$currenttime = time();
if( ($currenttime - $mtime) > $threshhold){
# file was modified within 24 hours
}
for files modified after midnight lastnight:
if( $mtime > ($currenttime - ($currenttime % 86400)){
# file was modified this calendar day
}
More information here