The previous DB2 Express-C versions were working fine over the years, but the basic commands not running on no cost Db2 Community Edition 11.5.5 (latest) .
after installing the Db2 Community Edition 11.5.5, when running the db2level command, it gives the error:
SQL1022C There is not enough memory available to process the command.
and below links didn't help:
https://www.ibm.com/support/pages/error-sql1022c-there-not-enough-memory-available-process-command-after-changing-hostname-db2-server
https://www.ibm.com/support/pages/running-db2level-db2-command-window-returning-sql1022c
Some my findings are:
db2set' not working - DBI1302E Invalid parameter detected.
'db2set -all' working - DB2_EXTSECURITY=YES
'db2level' - SQL1022C There is not enough memory available to process the command.
'db2start' not working - SQL1390C The environment variable DB2INSTANCE is not defined or is invalid.
DB2 icon not presented on taskbar
db2 get dbm cfg | find "SYSADM" - not working (no output)
db2 get dbm cfg - DB21018E A system error occurred. The command line processor could not continue processing.
db2 update dbm cfg using sysadm_group DB2ADMNS - DB21018E A system error occurred. The command line processor could not continue processing.
Followed the same recommended steps (for DB2 installation) as being following since DB2 9.7 version (on WIN 8.1 machine + RAM 8 GB).
My logged-in user is machine administrator
The supplied user is 'db2admin'
Now on the problem machine, OS is Windows 10 Pro + RAM 8 GB.
Ran the setup.exe after extracting the downloaded zip
From the DB2 Setup Launchpad > Install a Product > DB2 Version 11.5.5.0 Server Editions > Install Now > then installed with all default settings
DB2 setup installed successfully but DB2 commands not working as explained above
I had the same issue but after installing db2 with administrator privileges (starting setup.exe as an admin) the issues were gone and everything was set up as expected.
Related
I'm trying to install Oracle Database 18c locally on my windows 10 pro education but installation is stuck on Creating Oracle XE database even It wasn't allowing to cancel the installation at this point I had to do this through task manager , I have already tried the following as suggested here but no use:
0)Please disable anti-virus and try again.
Is ORACLE_HOME or TNS_ADMIN set in the environment? Go to a command prompt, type "set". You will need to temporarily unset any such environment variables.
Are you using Windows 10 Home Edition? It is not supported and the installer is not properly checking for it in the Prerequisite check.
Are you using Server 2019? Same issue.
On your network adapter that you are using, check (enable) "Client for Microsoft Networks" and "File and Printer Sharing for Microsoft Networks".
Check to make sure Netbios is enabled on your network connection:
In some cases, antivirus has interfered with an installation. Try installing without AV.
Try creating a local user and adding to local administrator group and then log in and install as that user.
In my case, the problem occurred because a space was used as a password.
I downloaded trail version of DB2 (by following steps here:https://www.db2tutorial.com... some steps didn't come when i installed)and i opened Administrator:DB2 CLP - DB2COPY1 -db2, then i have given the cmd as
db2 => LIST ACTIVE DATABASES
output(error):
SQL1096N The command is not valid for this node type.
db2 =>
it's not working, here version of DB2 is:11.5.0.1077,Please advice how to proceed further.In fact not only this command, so many commands are not working.
The message:
"SQL1096N The command is not valid for this node type."
as a response to "list active databases" command
usually means that you did not install a Db2-server product, or you have multiple Db2-products installed and you chose to act on a client instance instead of a server instance.
You might have installed a full Db2-client product by accident, by clicking the wrong button on the setup program gui page for Install a product, or the installable image that you downloaded was not a server image (but instead a client image).
Different ways to see the node type:
You can see which Db2 product(s) you installed if you run
appwiz.cpl from the Windows Start menu and examine the list.
You can also see what you installed if you examine the log file created by the setup program during installation.
open a db2cmd.exe window (from Windows Start > Run) and in there run the command db2 get dbm cfg | more and near the start you will see Node type = ..... If your db2cmd.exe window is addressing a server installation, then the node type will be something like ...Server edition with local and remote clients. If you see Node type = Client, then you are not addressing a server installation. So in this case, you can either uninstall the client image and install a server image, or configure your db2cmd.exe window to address a server installation.
If you have multiple Db2 products installed then run the Default DB2 and Database Client Interface Selection wizard which should appear in your Windows Start menu under the IBM Db2 group. This lets you choose which instance to make the default, so that when you run a db2cwadmin/db2cmd window, then the correct product gets addressed.
If you installed a Db2-server product, then you can run db2cwadmin.bat (from the Windows Start Menu) and in that window the commands db2start and db2stop will be available, and the command-line db2 list active databases will report (by default) one local database called SAMPLE assuming you created the default database in the First Steps that runs after installation.
If you installed a Db2-server product, with all the default settings on a Microsoft Windows operating-system, then you will also see a process called db2sysc.exe in the Task List when the Db2-instance is running.
Verify that you downloaded the server image from IBM, and then re-run the setup program and ensure you choose to install a server product.
I am planning to do SQL replication through InfoSphere Federation Server and installed the latest version from IBM website, while running the executable iisetup.exe, federation tool create the db2 instances and ask for db2user password and port as well, I have given all the required information and at the end installation and JDBC wrapper was successfully completed. after that I have open the db2 command prompt through administration. I am getting issue in running all the command eg
C:\db2\BIN>db2start
SQL1390C The environment variable DB2INSTANCE is not defined or is invalid.
C:\db2\BIN>db2 GET DATABASE MANAGER CONFIGURATION
DB21018E A system error occurred. The command line processor could not continue processing.
I had Postgresql 9.6 installed (on Windows 10) and did a complete uninstall including the data directory and all old copies of PgAdmin and there are no environment variables relating to this or any other old Postgres installation either.
I recently installed Postgresql 11 and PgAdmin 4 v3.6 using EnterpriseDB installer. When I run PgAdmin 4 it aurto detects a postgresql instance called 9.6 - though the details tell me it is actually my v11 instance with the same port number and password etc. The only difference is that it is pointing to the non-existent old data directory.
I have searched for a stray postgresql.conf file (and can't find one as it was in the deleted data directory!). As there is also no environment variables, no binaries and no data I can't understand how PgAdmin is auto detecting this ghost. Any suggestions on how to correct it?
EDIT:
I have tried deleting all cookies relating to PgAdmin and Postgresql in Chrome too - this had no effect
I have also double checked that there is no postgresql 9.6 service running (but that just confirms the above where PgAdmin tells me it is called 9.6 but actually is a v11 instance)
Try deleting pgAdmin4 config file pgadmin4.db located at %APPDATA%\pgAdmin\
Restart pgAdmin4 and check.
After successfully installing IBM DB2 Express V10.5_01 on an Ubuntu 14.04 LTS machine I tried to follow the next step and start
db2fs
in an X-Windows session. I am asked to create a profile for firefox and a browser window comes up with an error message dialog showing
exception TypeError: netscape.security.PrivilegeManager is undefined
When pressing ok for a few times the "create sample database" button disappears and instead a warning appears:
First Steps was unable to connect to the online DB2 Information Center and could not find an instance of a locally installed DB2 Information Center for this version of the product. To access product information, one of the following types of connections to a DB2 Information Center is required:
Internet access to the online DB2 Information Center
A locally installed version of the DB2 Information Center
Access to a remotely configured DB2 Information Center
As a workaround I tried to use
db2sampl
after adding my user to the groups dasadm1 db2iadm1 and db2fadm1 that had been created by the installation procedure.
db2sampl -force
Creating database "SAMPLE"...
Existing "SAMPLE" database found...
Dropping and recreating database "SAMPLE"...
Attempt to drop existing database "SAMPLE" failed.
Attempt to create the database "SAMPLE" failed.
SQL1013N The database alias name or database name "SAMPLE " could not be
found. SQLSTATE=42705
db2 list db directory
shows:
Database alias = SAMPLE
Database name = SAMPLE
Local database directory = <path>/db2inst1
Database release level = 10.00
Comment =
Directory entry type = Indirect
Catalog database partition number = -1
Alternate server hostname =
Alternate server port number =
unfortunately
db2cc
is not available anymore as an admin tool in V10.5 see DB2 Express V10.1 and db2cc binary and before downloading
IBM Data Studio I'd first like to check the basic integrity of my installation.
db2help
e.g. gives the errormessage
/bin/sh: 0: Illegal option -p
In all I have the feeling that Ubuntu 14.04 LTS is not a properyly supported platform for IBM DB2 Express V10.5_01.
How feasible is it to get IBM DB2 Express V10.5_01 running in this environment?