I tried opening the terminal using Rosetta but when I run brew install mongodb-community#5.0 I get an error that says:
Error: Cannot install under Rosetta 2 in ARM default prefix (/opt/homebrew)! To rerun under ARM use: arch -arm64 brew install ... To install under x86_64, install Homebrew into /usr/local.
However, when I run it as arch -arm64 brew install mongodb-community#5.0, it again complains with:
arch: posix_spawnp: brew: Bad CPU type in executable
Any help would be appreciated.
Thanks in advance.
There are two versions of brew:
Intel version (in /usr/local/homebrew)
ARM64 version for Apple Silicone (in /opt/homebrew/)
When you just type brew you are probably using native ARM64 version, for which there is no mongodb server yet.
You can check which version is your default with this:
$ which brew
/opt/homebrew/bin/brew
The solution I find most practical is to define alias for Intel brew like this in .zshrc:
# arm64/intel brew
alias brew86="arch -x86_64 /usr/local/Homebrew/bin/brew"
alias brewARM="/opt/homebrew/bin/brew"
# ARM64 brew is default
eval "$(/opt/homebrew/bin/brew shellenv)"
Then you can use intel brew to install intel based apps like this:
brew86 install mongodb-community
brew86 services
...
And you can use ARM64 brew to install native ARM64 stuff like this:
brew install mongosh
Important note - do not use "Open using rosetta2" to launch terminal window in which you gonna run these commands. You wish to be in native ARM64, then install Intel apps only when is absolutely needed with brew86.
For some reason even though I had Homebrew in /usr/local the one for M1 was being executed. Solved it by manually navigating in /usr/local/Homebrew/bin and running the commands with ./brew.
Related
I install Homebrew.
Then I run command
"brew install cocoapods". It install successfully
but in flutter doctor i got error: cocoapods installed but not working properly. Error because of ruby incompatible version.
Tried another method
"sudo gem install cocoapods"
and got error:
While executing gem ... (Gem::FilePermissionError)
You don't have write permissions for the /System/Library/Frameworks/Ruby.framework/Versions/2.6/usr/lib/ruby/gems/2.6.0 directory.
This is m1 pro 2020 machine.
For MAC M1 chip Users try this solution
install ffi first (if not) In regular terminal using command: sudo arch -x86_64 gem install ffi then arch -x86_64 pod install --repo-update
Run flutter clean
Once complete, rebuild your Flutter application: flutter run
Try to avoid linking with system ruby and download a new ruby version using brew:
brew install ruby
Then add this line to .bash_profile or .zshrc
export PATH=/usr/local/opt/ruby/bin:$PATH
Close the terminal and open it again, then run this line to make sure the default ruby is the newly installed:
which ruby
Uninstall gem cocoapods and download it using brew
brew install cocoapods
Trying to install mongodb server on my mac using Brew but getting this error.
Updated my brew to latest version, still egtting this error.
Command i used:
brew install mongodb-community#6.0
I figured it out myself. Here is the solution which I found out. I am using mac os on intel processor.
I first run
rm -fr $(brew --repo homebrew/core)
then
brew tap homebrew/core
then
brew tap mongodb/brew
then installed it
brew install mongodb-community#6.0
This worked for me.
Can someone help me please. I keep trying to install mongodb using different methods but I can never get past a certain point.
I have homebrew installed, and it's updated. And x-code installed as well.
It's when I run % brew install mongodb-community#5.0 or % brew install mongodb-community#4.2 that I get this error message-
Error: Cannot install in Homebrew on ARM processor in Intel default prefix (/usr/local)!
Please create a new installation in /opt/homebrew using one of the
"Alternative Installs" from:
https://docs.brew.sh/Installation
You can migrate your previously installed formula list with:
brew bundle dump
also, note: I have a Macbook Pro with an M1 Max chip
Thank you in advance for any help!
I've been trying to run the Rust Diesel crate on my Macbook M1 and it doesn't work. The final part of the compilation gets broken by the following error:
= note: ld: warning: ignoring file /usr/local/Cellar/libpq/14.1/lib/libpq.dylib, building for macOS-arm64 but attempting to link with file built for macOS-x86_64
Undefined symbols for architecture arm64:
When I get the info for libpq I get the following:
maxwellflitton#Maxwells-MacBook-Pro vanguard % brew info libpq
libpq: stable 14.1 (bottled) [keg-only]
Postgres C API library
https://www.postgresql.org/docs/14/libpq.html
/usr/local/Cellar/libpq/14.1 (2,335 files, 27.8MB)
Poured from bottle on 2022-01-09 at 00:14:32
From: https://github.com/Homebrew/homebrew-core/blob/HEAD/Formula/libpq.rb
License: PostgreSQL
==> Dependencies
Required: krb5 ✔, openssl#1.1 ✔
==> Caveats
libpq is keg-only, which means it was not symlinked into /usr/local,
because conflicts with postgres formula.
If you need to have libpq first in your PATH, run:
echo 'export PATH="/usr/local/opt/libpq/bin:$PATH"' >> ~/.zshrc
For compilers to find libpq you may need to set:
export LDFLAGS="-L/usr/local/opt/libpq/lib"
export CPPFLAGS="-I/usr/local/opt/libpq/include"
I've tried installing with the following command:
RUSTFLAGS='-L /usr/local/Cellar/libpq/14.1/lib' cargo install diesel_cli --no-default-features --features postgres --force
But I still get the same error. Will it just be easier to wipe the whole thing and start again and if so how would I do this? Other people on the internet using the M1 seem to be able to get round the problem with a simple brew install libpq. Never had any issues with my previous intel mac. My ~/.cargo/config.toml has the following configuration:
[target.aarch64-apple-darwin]
rustflags = '-L /usr/local/Cellar/libpq/14.1/lib -L /opt/homebrew/lib'
Surprisingly this worked
brew install postgresql libpq
cargo clean
cargo build
cargo install diesel_cli --no-default-features --features postgres
I think it had to do with installing diesel-cli before installing the necessary dependencies. Cleaning the cargo dependencies and reinstalling worked for me
on my M1 mac, I installed the postgresql client and library with brew:
brew install postgresql libpq
and attempted to install diesel_cli again, this time it worked fine:
cargo install diesel_cli --no-default-features --features postgres
for some reason, simply installing libpq was not enough to install diesel_cli, i had to install the postgres library and the client.
Encountered a similar problem, and the issue was coming from my brew config (I restored my filesystem from my mac Intel) :
❯ brew config
...
macOS: 12.6-x86_64
...
Therefore, brew was downloading packages built for intel processors. I uninstalled and reinstalled brew following their website and now brew config is correct:
❯ brew config
...
macOS: 12.6-arm64
...
Hope this helps!
I have a Mac M1 and installed both postgresql and libpq with brew
I eventually succeeded in installing diesel_cli with these lines in my ~/.cargo/config.toml file
[target.aarch64-apple-darwin]
rustflags = '-L /opt/homebrew/opt/libpq/lib -L /opt/homebrew/lib'
source was https://github.com/diesel-rs/diesel/issues/2605
I'm working on Michael Hartl's ruby on rails tutorial http://ruby.railstutorial.org/ruby-on-rails-tutorial-book#sec-development_tools.
I installed Git, updated my OS to 10.8.2 and downloaded XCode 4.5.2.
when I type in
rvm install 1.9.3
this long thing comes up...
Ruby (and needed base gems) for your selection will be installed shortly.
Before it happens, please read and execute the instructions below.
Please use a separate terminal to execute any additional commands.
Notes for Mac OS X 10.8.2, Xcode 4.5.2.
For JRuby: Install the JDK. See http://developer.apple.com/java/download/ # Current Java version "1.6.0_26"
For IronRuby: Install Mono >= 2.6
For Ruby 1.9.3: Install libksba # If using Homebrew, 'brew install libksba'
For Opal: Install Nodejs with NPM. See http://nodejs.org/download/
To use an RVM installed Ruby as default, instead of the system ruby:
rvm install 1.8.7 # installs patch 357: closest supported version
rvm system ; rvm gemset export system.gems ; rvm 1.8.7 ; rvm gemset import system.gems # migrate your gems
rvm alias create default 1.8.7
And reopen your terminal windows.
Xcode and gcc:
Right now Ruby requires gcc to compile, but Xcode 4.2 and later no longer ship with gcc. Instead they ship with llvm-gcc (to which gcc is a symlink) and clang, neither of which are supported for building Ruby. Xcode 4.1 was the last version to ship gcc, which was /usr/bin/gcc-4.2.
Xcode 4.1 and earlier:
- Ruby will build fine.
Xcode 4.2 and later (including Command Line Tools for Xcode):
- If you have gcc-4.2 (and friends) from an earlier Xcode version, Ruby will build fine.
- If you don't have gcc-4.2, you have two options to get it:
* Install apple-gcc42 from Homebrew
* Install osx-gcc-installer
Homebrew:
If you are using Homebrew, you can install the apple-gcc42 and required libraries from homebrew/dupes:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
rvm pkg install openssl
Xcode 4.2+ install or/and Command Line Tools for Xcode is required to provide make and other tools.
osx-gcc-installer:
If you don't use Homebrew, you can download and install osx-gcc-installer: https://github.com/kennethreitz/osx-gcc-installer.
Warning: Installing osx-gcc-installer on top of a recent Xcode is known to cause problems, so you must uninstall Xcode before installing osx-gcc-installer. Afterwards you may install Xcode 4.2+ or Command Line Tools for Xcode if you desire.
** NOTE: Currently, Node.js is having issues building with osx-gcc-installer. The only fix is to install Xcode over osx-gcc-installer.
Press 'q' to continue.
~
(END)
Originally I had to get homebrew and
brew install libksba
but I did that already and it works. That leads to "Xcode and gcc:" and everything below it.
So, I have homebrew, and the following three commands work:
brew update
brew tap homebrew/dupes
brew install autoconf automake apple-gcc42
But when I try
rvm pkg install openssl
this is what happens
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
And this is what happens when I try what it says...
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm reinstall all --force
Adam-Zerners-MacBook-Pro:~ adamzerner$
some other information...
I don't see a .rvm folder under adamzerner, so I can't read what it tells me to (not that I would understand what I'd be reading anyway).
It seems that I have 1.8.7 installed:
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
So... to summarize... when I try to run
rvm install 1.9.3
I get the gcc/Xcode problem. To fix that it says to download apple-gcc42 from Homebrew. When I do that, I get a problem after doing
rvm pkg install openssl
The problem being that I need to reinstall all rubies. When I do that:
rvm reinstall all --force
it seems that nothing happens.
Thanks in advance to anyone willing to help me with this problem!
EDIT: I forgot to say this before. For the "long thing" up above, when I press q to continue, this is what happens...
Searching for binary rubies, this might take some time.
https://rvm.io/binaries/osx/10.8/x86_64/ruby-1.9.3-p327.tar.bz2 - #configure
ruby-1.9.3-p327 - #download
ruby-1.9.3-p327 - #extract
ruby-1.9.3-p327 - #validate
Libraries missing for ruby-1.9.3-p327: env. Refer to your system manual for installing libraries
Mounting remote ruby failed, trying to compile.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327 (already extracted)
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
EDIT: What happens when I follow the github link OliverAtkinson posted
Last login: Wed Dec 26 15:55:12 on ttys000
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew update
Updated Homebrew from 751a0d6e to c67c126c.
==> New Formulae
ume
==> Updated Formulae
akka global markdown ruby slrn
basex gnuplot mu ruby-build ttytter
casperjs gradle qt shiboken vice
cassandra groonga qt5 shocco wine
discount jenkins rakudo-star signing-party xvid
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew tap homebrew/dupes
Error: Already tapped!
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
Error: autoconf-2.69 already installed
Error: automake-1.12.6 already installed
Error: apple-gcc42-4.2.1-5666.3 already installed
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew remove autoconf automake apple-gcc42
Uninstalling /usr/local/Cellar/autoconf/2.69...
Uninstalling /usr/local/Cellar/automake/1.12.6...
Uninstalling /usr/local/Cellar/apple-gcc42/4.2.1-5666.3...
Adam-Zerners-MacBook-Pro:~ adamzerner$ brew install autoconf automake apple-gcc42
==> Downloading http://ftpmirror.gnu.org/autoconf/autoconf-2.69.tar.gz
Already downloaded: /Library/Caches/Homebrew/autoconf-2.69.tar.gz
==> Patching
patching file bin/autoreconf.in
==> ./configure --prefix=/usr/local/Cellar/autoconf/2.69
==> make install
/usr/local/Cellar/autoconf/2.69: 69 files, 2.0M, built in 13 seconds
==> Downloading http://ftpmirror.gnu.org/automake/automake-1.12.6.tar.gz
Already downloaded: /Library/Caches/Homebrew/automake-1.12.6.tar.gz
==> ./configure --prefix=/usr/local/Cellar/automake/1.12.6
==> make install
/usr/local/Cellar/automake/1.12.6: 130 files, 2.1M, built in 16 seconds
==> Downloading http://r.research.att.com/tools/gcc-42-5666.3-darwin11.pkg
Already downloaded: /Library/Caches/Homebrew/apple-gcc42-4.2.1-5666.3.pkg
==> Caveats
NOTE:
This formula provides components that were removed from XCode in the 4.2
release. There is no reason to install this formula if you are using a
version of XCode prior to 4.2.
This formula contains compilers built from Apple's GCC sources, build
5666.3, available from:
http://opensource.apple.com/tarballs/gcc
All compilers have a `-4.2` suffix. A GFortran compiler is also included.
==> Summary
/usr/local/Cellar/apple-gcc42/4.2.1-5666.3: 104 files, 75M, built in 5 seconds
Adam-Zerners-MacBook-Pro:~ adamzerner$ rvm pkg install openssl
Fetching openssl-1.0.1c.tar.gz to /Users/adamzerner/.rvm/archives
Extracting openssl to /Users/adamzerner/.rvm/src/openssl-1.0.1c
Configuring openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Compiling openssl in /Users/adamzerner/.rvm/src/openssl-1.0.1c.
Error running 'make', please read /Users/adamzerner/.rvm/log/openssl/make.log
Please note that it's required to reinstall all rubies:
rvm reinstall all --force
Updating openssl certificates
Error running 'update_openssl_certs', please read /Users/adamzerner/.rvm/log/openssl.certs.log
Adam-Zerners-MacBook-Pro:~ adamzerner$ CC=/usr/local/bin/gcc-4.2 rvm reinstall 1.9.3 --patch falcon --force-autoconf -j 3
Removing /Users/adamzerner/.rvm/src/ruby-1.9.3-p327...
/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 has already been removed.
Fetching yaml-0.1.4.tar.gz to /Users/adamzerner/.rvm/archives
Extracting yaml to /Users/adamzerner/.rvm/src/yaml-0.1.4
Configuring yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running './configure --prefix=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/configure.log
Compiling yaml in /Users/adamzerner/.rvm/src/yaml-0.1.4.
Error running 'make -j3', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/yaml/make.log
Installing Ruby from source to: /Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327, this may take a while depending on your cpu(s)...
ruby-1.9.3-p327 - #downloading ruby-1.9.3-p327, this may take a while depending on your connection...
ruby-1.9.3-p327 - #extracting ruby-1.9.3-p327 to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
ruby-1.9.3-p327 - #extracted to /Users/adamzerner/.rvm/src/ruby-1.9.3-p327
Applying patch /Users/adamzerner/.rvm/patches/ruby/1.9.3/p327/falcon.diff
ruby-1.9.3-p327 - #autoreconf-f
ruby-1.9.3-p327 - #configuring
Error running './configure --enable-shared --disable-install-doc --prefix=/Users/adamzerner/.rvm/rubies/ruby-1.9.3-p327 --with-opt-dir=/Users/adamzerner/.rvm/usr', please read /Users/adamzerner/.rvm/log/ruby-1.9.3-p327/configure.log
There has been an error while running configure. Halting the installation.
Adam-Zerners-MacBook-Pro:~ adamzerner$ ruby -v
ruby 1.8.7 (2012-02-08 patchlevel 358) [universal-darwin12.0]
Adam-Zerners-MacBook-Pro:~ adamzerner$
I've successfully downloaded Ruby 1.9.3 now!
I think the problem was that I hadn't downloaded Command Line Tools from XCode. See http://robots.thoughtbot.com/post/27985816073/the-hitchhikers-guide-to-riding-a-mountain-lion
note that for whoami, it's using the backtick key, which is right above the tab key. It is NOT using quotes.
After I downloaded Command Line Tools, I then typed in rvm install 1.9.3. I got the same "long thing" as before, but at that point I had everything I needed, so I just pressed q to continue, and ruby 1.9.3 was successfully installed!
note: although it was successfully installed, when I typed ruby -v, it still said it was 1.8.7 even though it wasn't. However, after closing and reopening the terminal, it then said that the version was indeed 1.9.3.