Mail Reader Sampler - Unable to read mail from yopmail/mailinator using jmeter
I am sending mail to abc123#yopmail.com , i want to read that mail or check whether received the mail in abc123#yopmail.com or not.
I haven't got any POP3/IMAP details of yopmail/mailinator.
Any other way i can verify the received emails.
Response in Jmeter - Error code -500
Imap cred for yopmail:
mail-imap.yopmail.com
port - not mentioned
username - abc#yopmail.com
password - not mentioned
Related
Does smpt.gmail.com change the MAIL TO property of an E-Mail? I sent one with these settings with ssl:
MAIL FROM:<someRandomNotExistingEmail#bla.com>
RCPT TO:<myRealGmail#googlemail.com>
DATA
From:<someRandomNotExistingEmail#bla.com>
To:<someOtherRandomNotExistingEmail#blabla.com>
Subject: Hello
Content of E-Mail.
.
250 2.0.0 OK - gsmtp
QUIT
I received the E-Mail, but instead of <someRandomNotExistingEmail#bla.com> the source was <myRealGmail#googlemail.com>, does Google change fake MAIL FROM Headers?
I installed Jenkins (Jenkins ver. 2.46.2) and i have configured SMTP Server in Manage Jenkins -> Configure System -> Email Notification.
Test mail is works fine. But in Job email notification not working.
Error message as : Error sending to the following VALID addresses
I checked the Jenkins log file.
550 5.7.60 SMTP; Client does not have permissions to send as this sender [KL1PR03MB1749.apcprd03.prod.outlook.com]
DEBUG SMTP: got response code 550, with response: 550 5.7.60 SMTP; Client does not have permissions to send as this sender [KL1PR03MB1749.apcprd03.prod.outlook.com]
RSET
250 2.0.0 Resetting
com.sun.mail.smtp.SMTPSendFailedException: 550 5.7.60 SMTP; Client does not have permissions to send as this sender [KL1PR03MB1749.apcprd03.prod.outlook.com]
at com.sun.mail.smtp.SMTPTransport.issueSendCommand(SMTPTransport.java:2057)
at com.sun.mail.smtp.SMTPTransport.finishData(SMTPTransport.java:1862)
at com.sun.mail.smtp.SMTPTransport.sendMessage(SMTPTransport.java:1100)
at javax.mail.Transport.send0(Transport.java:195)
at javax.mail.Transport.send(Transport.java:124)
at hudson.plugins.emailext.ExtendedEmailPublisher.sendMail(ExtendedEmailPublisher.java:357)
at hudson.plugins.emailext.ExtendedEmailPublisher._perform(ExtendedEmailPublisher.java:322)
at hudson.plugins.emailext.ExtendedEmailPublisher.perform(ExtendedEmailPublisher.java:230)
at hudson.tasks.BuildStepMonitor$1.perform(BuildStepMonitor.java:20)
at hudson.model.AbstractBuild$AbstractBuildExecution.perform(AbstractBuild.java:779)
at hudson.model.AbstractBuild$AbstractBuildExecution.performAllBuildSteps(AbstractBuild.java:720)
at hudson.model.Build$BuildExecution.cleanUp(Build.java:196)
at hudson.model.Run.execute(Run.java:1775)
at hudson.model.FreeStyleBuild.run(FreeStyleBuild.java:43)
at hudson.model.ResourceController.execute(ResourceController.java:98)
at hudson.model.Executor.run(Executor.java:405)
QUIT
How to fix this issue?
You need to set "System Admin email address" under Manage Jenkins -> Configure System. This is under the Jenkins Location header on that page!
Have a look at below thread.
How can I set the Sender's address in Jenkins?
I want to use telnet to send an e-mail with SMTP. It seemed that I had connect to the mail service successfully. And the message had been put in the queue too. But why did the SMTP service failed to send the message to the received address?
When I searched the solution by the internet, someone had said that firewall should paid it. But I have no idea about the relationship between the firewall or antivirus software and telnet.
This is my command:
220 smtp-5-124.smtpsmail.fmail.xd.sinanode.com ESMTP
helo a
250 smtp-5-124.smtpsmail.fmail.xd.sinanode.com
auth login
334 VXNlcd5hbWU6
a25vd215aGV2341241fasYS5jbg==
334 UGFzczdvcmQ6
UmF5V2adfa23adsfZzgyNA==
235 OK Authenticated
mail from: <knowmyheart#sina.cn>
502 unimplemented (#5.5.1)
mail from:<knowmyheart#sina.cn>
553 Envolope sender mismatch with login user..
mail from:<knowmyheart#sina.cn>
250 ok
rcpt to:<517447201#qq.com>
250 ok
data
354 End data with <CR><LF>.<CR><LF>
subject: test
to:<517447201#qq.com>
from:<knowmyheart#sina.cn>
Testttttttttttttt!
.
250 ok queue id 6744281442287
451 Timeout.
By the way, I tried it both on Windows 10 and Ubuntu-15.10. And both of them failed with the same question.
Finally, I found where I was wrong.
In my previous case,I failed to send a e-mail with the above code.I had succeeded in connecting with the SMTP server, and everything worked except the "Timeout" response. Actually, the "Timeout" didn't mean I failed to send a e-mail but lose the TCP connection. Hours Later, I login my e-mail, which was used for sending, finding that I receive a mail. The mail told me the e-mail I sent hours before with telnet was given back, failing to post. So it meant that the reason was hardly because of my telnet client, but in server or something else.
Finally, I found that it was because of my mail format. In my previous code, after I sending keyword -- "data", I immediately send the content.
data
354 End data with <CR><LF>.<CR><LF>
subject: test
to:<517447201#qq.com>
from:<knowmyheart#sina.cn>
Testttttttttttttt!
.
250 ok queue id 6744281442287
When I changed it to this, it worked.
data
354 End data with <CR><LF>.<CR><LF>
subject: test
to:<517447201#qq.com>
from:<knowmyheart#sina.cn>
Testttttttttttttt!
.
250 ok queue id 6744281442287
Notice that the difference between the codes is the empty line before the content in this mail. "subject", "to" and "from" are the headers. Between the header and the content, there must be an empty line.
Similarly, the headers in mail can be ignored. The code is like this:
data
354 End data with <CR><LF>.<CR><LF>
Testttttttttttttt!
.
250 ok queue id 6744281442287
451 Timeout.
Even if there is a "Timeout", it affect nothing but break the tcp connection between localhost and smtp server.
I've gone through the SendGrid integration instructions for Exim (http://docs.sendgrid.com/documentation/get-started/integrate/examples/exim/)
However, any email I send now is not being sent. Its all stuck in the queue. I looked for the log file for a message I'm trying to send and this is what I get:
2011-10-12 19:49:14 cwd=/var/spool/exim 3 args: /usr/sbin/exim -Mc 1RE9U2-0007Qg-20
+++ 1RE9U2-0007Qg-20 has not completed +++
2011-10-12 19:49:14 1RE9U2-0007Qg-20 <= email#example.com H=localhost [127.0.0.1] P=esmtpa A=dovecot_login:email#example.com S=731 id=20111012194913.13697j8jpb4heop5#example.com T="Test"
2011-10-12 19:49:14 1RE9U2-0007Qg-20 == email#gmail.com R=send_via_sendgrid T=sendgrid_smtp defer (-53): retry time not reached for any host
I've had the support rebuild the exim db, but that hasn't helped. I'm thinking it has to do with the fact that its using the dovecot login instead of the sendgrid login which is added after it. How do I make it use the sendgrid login info? Thanks!!
If you aren't using your SG credentials you're going to run into authentification issues.
Try the following to make sure you are using the correct credentials:
*:sendgridusername:sendgridpassword
I have set up the following publisher in CruiseControl:
<jabber host="my.network.local"
port="5222"
username="cruisecontrol"
password="cruisecontrol"
recipient="builds#conference.my.network.local"
chatroom="true"
buildresultsurl="http://cruise.control.net:7070/dashboard/tab/build/detail/customer" />
If I set chatroom to FALSE and enter a single recipient, everything works great. The problem I have is sending sending the build notification to a chat room. I set the chatroom value to TRUE and enter the fully qualified chatroom name I get the following error:
2009-10-16 13:34:10,818 [Thread-70897] ERROR JabberPublisher - Could not send message to recipient or chat room
No response from server.:
at org.jivesoftware.smack.GroupChat.join(GroupChat.java:162)
at org.jivesoftware.smack.GroupChat.join(GroupChat.java:123)
at net.sourceforge.cruisecontrol.publishers.JabberPublisher.init(JabberPublisher.java:146)
at net.sourceforge.cruisecontrol.publishers.JabberPublisher.publish(JabberPublisher.java:201)
at net.sourceforge.cruisecontrol.Project.publish(Project.java:742)
at net.sourceforge.cruisecontrol.Project.build(Project.java:264)
at net.sourceforge.cruisecontrol.Project.execute(Project.java:147)
at net.sourceforge.cruisecontrol.ProjectConfig.execute(ProjectConfig.java:402)
at net.sourceforge.cruisecontrol.ProjectWrapper.run(ProjectWrapper.java:69)
at java.lang.Thread.run(Thread.java:619)
Has anyone been able to send build messages to a Jabber chatroom using this method?
I haven't used Jabber with CruiseControl, but have you tried connecting to that port manually from your server running CC?
Like:
telnet my.network.local 5222
Can you log any of the xmpp / jabber packets from the client to server and back? We can see the CruiseControl config file and the java error, but we can't see what xmpp packets are actually being sent and received. That may be key in the troubleshooting.