Sorry (to all/any) if this has been asked. But I can't find a match to the question (at least not one that I interpret as such anyway).
I'm new to Visual Studio Code and loving it. One the features I use a lot is having multiple editor windows open on the same file (i.e. to be editing different, but related sections of the code).
Now... If I use 'Save', all edits in all open windows are saved. However, if I 'Save As' the file is saved as a new file, but only the active editor window is now accessing that file. Any other open editor windows are still connected to original (i.e. pre 'Save as') version of the file.
This means (e.g. when simply amending the file version number) having to close all other windows, then reopen and get each back to the sections they where focused on.
Is there any way to tell VSC that a Save As should be reflected in all open windows (of the same file)?
Related
Within the explorer panel of VS Code itself, if I want to copy a file to another directory in the workspace, I can use ctrl+c and ctrl+v, but if I find a file from another application on my computer such as the native File Explorer application, first pressing the shortcut key ctrl+c and then going to the VS Code window and pressing the shortcut key ctrl+v in the Explorer panel, there is no effect.
Note that I'm not talking about copying the contents of the file and pasting into VS Code. I'm talking about copying "the file" as in the notion of the file to the desktop environment.
The workaround is the use the native file explorer, copy the file first, then open the folder opened in VS Code, and finally paste it within the native file explorer. But I find this so troublesome.
Is there an easier way to do this? Does VS Code support such functionality to paste files copied to the clipboard from a different application (not VS Code) and paste into VS Code? Is that functionality hidden behind a setting that I need to change? Or is this possible via an extension?
Vscode does dragging the filename from a native file explorer (at least on Windows) and dropping in vscode's Explorer where you want it.
You can also use your OS's Open With... functionality and then drag the tab of that editor into whichever directory you want.
You can choose Add File from File to add a file to your workspace. Or you can use New File from File to create a new file in your workspace and copy the content of the file outside to it.
At the time of this writing, this is not supported... yet!
Work to implement this is tracked under this GitHub issue: Explorer: allow to paste files from the clipboard into target folder #130036, which is a subtask of a larger issue tracking a larger effort for Better drag and drop / clipboard integration of files across applications #164.
You can give a thumbs up reaction on those issue pages to increase their prioritization (but please don't leave "me too" comments there, as such comments are considered annoying noise).
pingren (a contributor to the VS Code repository) tried to implement this and found it to be more complicated than it looks. You can read their explanation of why in their comment there. One of the difficulties stems from itegration with system keybindings and VS Code's affordance for remapping keys:
the onPaste event could only be triggered by system paste (cmd+V on macOS). Users could change filesExplorer.paste command to any keybindings. So we need to consider how to merge native paste from clipboard and VSCode explorer paste.
There's another feature-request issue (Copy paste files from native explorer to vscode #89862, created before #130036) where isidorn (another VS Code contributor) commented:
This is a fair feature request however I believe there is a Chrome limtation which is preventing us from achieving this. [...]
As for extensions that might do this, I don't know of any (but haven't tried searching intently).
Other possible workarounds:
Try dragging the file from your native file explorer application to the VS Code file explorer panel. This is confirmed to work at least on Windows and Ubuntu.
From Mark's answer (copied under CC-BY-SA):
You can also use your OS's Open With... functionality and then drag the tab of that editor into whichever directory you want.
From user103's answer (copied under CC-BY-SA), and partially mentioned in the question post already:
You can choose Add File from File to add a file to your workspace. Or you can use New File from File to create a new file in your workspace and copy the content of the file outside to it.
My workflow with VS Code is to always use project folders on projects. This works great, but there's one thing that's messing things up right now;
When opening just a single file from another project while working in another project, lets's say webpack.config.js, I use Windows Explorer rightclick to open that file in VS Code. However, this always opens the file in the currently open VS Code instance.
This adds the file from that other folder now to the memory of the previously opened files in the open project while it has nothing to do with that project.
When using the quick file open of VS Code now it happens a lot VS Code opens a file from that other folder, only because that outside file has been opened once while I was working on this project.
This is error prone as now it happens a lot, especially when working fast, that the wrong, for instance, package.json or webpack.config.js file gets opened, because VS Code now also suggests files that are outside this project. That's pretty frustrating and causes changes to be made in the wrong files pretty quickly.
I know we can clear the editor history and have to do it a lot now. But to me that's the other way around, doesn't solve the real problem and when not done often the issue remains.
So I want to get rid of this issue and have the following questions:
1) How can we change the 'Open with Code' rightclick menuitem in Explorer to open files always in a new instance of VS Code?
2) Is there a config settings to disable the behaviour that VS Code remembers files that are outside of the current work folder?
Thanks in advance, this thing is bothering me for quite some time now!
How can we change the 'Open with Code' rightclick menuitem in Explorer to open files always in a new instance of VS Code?
I assume you are a Windows user. You can edit the context menu behavior from Regedit.
Follow the below steps:
Press Windows + R
Type regedit and press OK
Go to Computer\HKEY_CLASSES_ROOT\*\shell\VSCode\command in regedit
Add -n parameter to the command like below
It will help you to open every file in a new window when you use Open with Code.
For your second question, Is there a config settings to disable the behavior that VS Code remembers files that are outside of the current work folder?
Open VS Code settings
Search window.openFilesInNewWindow
Make it off to on like below
With this configuration, you can't open new files in the current workspace therefore technically you prevent VS Code remember outside files. Not directly but it helps.
I don't like how "recently opened" files are shown in VS Code Quick Open (Ctrl+P). I think OP is describing this behavior...
The behavior to remember "recently opened" files causes me problems when I mistakenly open a temporary/copy of my file, i.e.
C:/users/temp/code.js
... instead of the true file (i.e. located inside the currently-open VS Code project)
C:/git/source-control/code.js
...my confusion happens because because both files are listed among the options when I use Quick Open Ctrl+P and type "code"
For me , the Quick Open list also has the answer, any "recently-open" files should have an "X" icon on the right side. You may need to hover your mouse over the file you want to remove.
Click the "X" icon to "Remove from recently open". Quick Open will always be able to find files in your current project, even if you remove them from recently-open:
Please note I don't have access to regedit as suggested in the accepted answer; my answer here does not require regedit
One of the most useful features of Sublime Text for me was that it keep a history of all the files that I opened. How can I get this functionality in VS Code?
The list of previously opened files/editors when I open cmd+p is really small and it doesn't persist across sessions.
Edit: the problem isn't that I lose my previously opened files when I close the session, but that there is no convenient way of accessing a file I opened a week ago, for example.
To see a list of recently opened files (as of v1.42) try this in the command palette:
View: Show All Editors By Most Recently Used
or use this command workbench.action.showAllEditorsByMostRecentlyUsed in a keybinding.
On mac it's ⌘ + P.
I'm using mac monterey
I don't know how I missed this: File | Open Recent | More it's assigned to action workbench.action.openrecent.
The only thing I'd like to know is if there is a way of setting the number of files it remembers (the buffer size).
I do not want Vscode to open up another window while debugging. Is there a way to attach this window inside the IDE?
If the above is impossible, is there a way to choose a more usable terminal? The default terminal doesn't allow for text selection which makes it unacceptable.
Since VSCode is not an IDE, we do not have a built-in terminal.
I tried the terminals on OS X, Linux, and Windows. They all allow me to select and copy text (however on Windows it is through the 'Edit' > 'Mark' mechanism).
Andre Weinand, Visual Studio Code
The vscode forums have a request for an integrated terminal with a number of upvotes, i'd advise adding your voice to the chorus.
It's a must to output the debug console writes to an attached panel in Visual Studio Code. Click an highlight a word in the debug output console text to do a global project search to find all code containing that string. A common thing like tagging error blocks with a unique ID that gets output to the console when the error happens. Full text search of the project source code tree for the ID...
I get files from friend who don't use netbeans IDE, when i open file that contain special caracter like 'é','à',... it show me this popup message :
if i say yes it open the file and changes those caracters to '�' like or
Any idea how to open the file safely?
The letters you are mentioning seem to be French. You need to open the file, specifying the original encoding, then save the file as UTF-8
I recently encountered a very similar problem (I have some javascript files in Chinese which translated into similar non-human readable text upon re-opening the file in NetBeans).
My OS: Linux Mint (version 17, Cinnamon; Notepad++ not available and gedit did not solve the problem).
Netbeans Version: 8.0.1
However, I was blessed to have found the history feature! I was able to get a former version of my file restored and backed it up immediately.
To access a file's history simply click on the History button found on the left side of the tool bar between the tabs of open files at the top of the IDE and the actual source code. (You can also right click on the file name and selected History -> Show History). Then Double click on a *Timestamp representing a valid version of your file. Just below the table of Timestamps the old 'backup' file and the current 'corrupted' file should appear side-by-side. (You can preview several historical versions of the file until you find one that works best for you; of course, when choosing a file I suggest one which is still usable and has the most current Timestamp associated with it!) ). Right click again on the 'backup' version of your choice -> Revert from History. Click back on the Source button found right next to the History button.
Finally, to change the default encoding, I applied the fix suggested by Sebas and Danny here:
How to change file encoding in NetBeans?
Please note that the path to the netbeans.conf file is different (at least with version 8.0.1 on my Linux machine). The path on my machine was : ~/netbeans-8.0.1/etc/netbeans.conf.
This saved the day for me and I hope it helps someone else out there! Bonne chance.