I am using node 11.6, mongodb 4.2.5, mongoose 4.3.17. I am trying to update a field by adding a string to the end of it. I first updated to mongo 4.2 which I apparently needed to use aggregation pipelines in updates.
I tried following this post like this:
var update = [{$set: {slug: {$concat: ['$slug', '-rejected']}}}];
Content.findOneAndUpdate({_id: id}, update, {new: true}, (err, doc) => {
//
});
but when I ran it I got no error, no document returned, and it was not updated.
So I removed the outer [], and passed just an object like this:
var update = {$set: {slug: {$concat: ['$slug', '-rejected']}}}
Content.findOneAndUpdate({_id: id}, update, {new: true}, (err, doc) => {
//
});
And I receive this error message:
`Cast to string failed for value "{ '$concat': [ '$slug', '-rejected' ] }" at path "slug"`,
What does this mean? How can I accomplish this? (without two separate calls)
Running the same function but replacing update with:
var update = {slug: 'test-slug'}
successfully updates the slug to 'test-slug'.
But trying to do the same simple thing with an aggregation acts much like my previous attempt, no error or change:
var update = [{$set: {slug: 'test-sluggy'}}]
Using updateOne() instead of findOneAndUpdate() doesn't change anything either.
The only thing I can think that could cause it is the mongoose version, but it seems like there's a lot of changes between 4 and 5 and I don't want to update unless I have to, but I can't find anything that says it would change anything.
The pipeline form requires that the update be an array of pipeline stages.
Try wrapping your existing update in [] like
var update = [{$set: {slug: {$concat: ['$slug', '-rejected']}}}]
we can use something like that
var update = [{ $set: { slug: { $concat: ['$slug', '-rejected'] } } }]
starting from mongo versions > 4.2, the update operations can accept an aggregation pipeline, so we are able to update some field based on its current value:
the whole query may be something like that
Content.findOneAndUpdate(
{ _id: id }, // the find criteria
[{ $set: { slug: { $concat: ['$slug', '-rejected'] } } }], // this is the update aggregation pipeline, see the square brackets
{ multi: true }, // this should be set to true if you have more than one document to update,
// otherwise, only the first matching document will be updated,
// this is in case you use update rather than findOneAndUpdate,
// but here we have only one document to update, so we can ignore it
(err, doc) => {
//
});
I have a Mongo document which holds an array of elements.
I'd like to reset the .handled attribute of all objects in the array where .profile = XX.
The document is in the following form:
{
"_id": ObjectId("4d2d8deff4e6c1d71fc29a07"),
"user_id": "714638ba-2e08-2168-2b99-00002f3d43c0",
"events": [{
"handled": 1,
"profile": 10,
"data": "....."
} {
"handled": 1,
"profile": 10,
"data": "....."
} {
"handled": 1,
"profile": 20,
"data": "....."
}
...
]
}
so, I tried the following:
.update({"events.profile":10},{$set:{"events.$.handled":0}},false,true)
However it updates only the first matched array element in each document. (That's the defined behaviour for $ - the positional operator.)
How can I update all matched array elements?
With the release of MongoDB 3.6 ( and available in the development branch from MongoDB 3.5.12 ) you can now update multiple array elements in a single request.
This uses the filtered positional $[<identifier>] update operator syntax introduced in this version:
db.collection.update(
{ "events.profile":10 },
{ "$set": { "events.$[elem].handled": 0 } },
{ "arrayFilters": [{ "elem.profile": 10 }], "multi": true }
)
The "arrayFilters" as passed to the options for .update() or even
.updateOne(), .updateMany(), .findOneAndUpdate() or .bulkWrite() method specifies the conditions to match on the identifier given in the update statement. Any elements that match the condition given will be updated.
Noting that the "multi" as given in the context of the question was used in the expectation that this would "update multiple elements" but this was not and still is not the case. It's usage here applies to "multiple documents" as has always been the case or now otherwise specified as the mandatory setting of .updateMany() in modern API versions.
NOTE Somewhat ironically, since this is specified in the "options" argument for .update() and like methods, the syntax is generally compatible with all recent release driver versions.
However this is not true of the mongo shell, since the way the method is implemented there ( "ironically for backward compatibility" ) the arrayFilters argument is not recognized and removed by an internal method that parses the options in order to deliver "backward compatibility" with prior MongoDB server versions and a "legacy" .update() API call syntax.
So if you want to use the command in the mongo shell or other "shell based" products ( notably Robo 3T ) you need a latest version from either the development branch or production release as of 3.6 or greater.
See also positional all $[] which also updates "multiple array elements" but without applying to specified conditions and applies to all elements in the array where that is the desired action.
Also see Updating a Nested Array with MongoDB for how these new positional operators apply to "nested" array structures, where "arrays are within other arrays".
IMPORTANT - Upgraded installations from previous versions "may" have not enabled MongoDB features, which can also cause statements to fail. You should ensure your upgrade procedure is complete with details such as index upgrades and then run
db.adminCommand( { setFeatureCompatibilityVersion: "3.6" } )
Or higher version as is applicable to your installed version. i.e "4.0" for version 4 and onwards at present. This enabled such features as the new positional update operators and others. You can also check with:
db.adminCommand( { getParameter: 1, featureCompatibilityVersion: 1 } )
To return the current setting
UPDATE:
As of Mongo version 3.6, this answer is no longer valid as the mentioned issue was fixed and there are ways to achieve this. Please check other answers.
At this moment it is not possible to use the positional operator to update all items in an array. See JIRA http://jira.mongodb.org/browse/SERVER-1243
As a work around you can:
Update each item individually
(events.0.handled events.1.handled
...) or...
Read the document, do the edits
manually and save it replacing the
older one (check "Update if
Current" if you want to ensure
atomic updates)
What worked for me was this:
db.collection.find({ _id: ObjectId('4d2d8deff4e6c1d71fc29a07') })
.forEach(function (doc) {
doc.events.forEach(function (event) {
if (event.profile === 10) {
event.handled=0;
}
});
db.collection.save(doc);
});
I think it's clearer for mongo newbies and anyone familiar with JQuery & friends.
This can also be accomplished with a while loop which checks to see if any documents remain that still have subdocuments that have not been updated. This method preserves the atomicity of your updates (which many of the other solutions here do not).
var query = {
events: {
$elemMatch: {
profile: 10,
handled: { $ne: 0 }
}
}
};
while (db.yourCollection.find(query).count() > 0) {
db.yourCollection.update(
query,
{ $set: { "events.$.handled": 0 } },
{ multi: true }
);
}
The number of times the loop is executed will equal the maximum number of times subdocuments with profile equal to 10 and handled not equal to 0 occur in any of the documents in your collection. So if you have 100 documents in your collection and one of them has three subdocuments that match query and all the other documents have fewer matching subdocuments, the loop will execute three times.
This method avoids the danger of clobbering other data that may be updated by another process while this script executes. It also minimizes the amount of data being transferred between client and server.
This does in fact relate to the long standing issue at http://jira.mongodb.org/browse/SERVER-1243 where there are in fact a number of challenges to a clear syntax that supports "all cases" where mutiple array matches are found. There are in fact methods already in place that "aid" in solutions to this problem, such as Bulk Operations which have been implemented after this original post.
It is still not possible to update more than a single matched array element in a single update statement, so even with a "multi" update all you will ever be able to update is just one mathed element in the array for each document in that single statement.
The best possible solution at present is to find and loop all matched documents and process Bulk updates which will at least allow many operations to be sent in a single request with a singular response. You can optionally use .aggregate() to reduce the array content returned in the search result to just those that match the conditions for the update selection:
db.collection.aggregate([
{ "$match": { "events.handled": 1 } },
{ "$project": {
"events": {
"$setDifference": [
{ "$map": {
"input": "$events",
"as": "event",
"in": {
"$cond": [
{ "$eq": [ "$$event.handled", 1 ] },
"$$el",
false
]
}
}},
[false]
]
}
}}
]).forEach(function(doc) {
doc.events.forEach(function(event) {
bulk.find({ "_id": doc._id, "events.handled": 1 }).updateOne({
"$set": { "events.$.handled": 0 }
});
count++;
if ( count % 1000 == 0 ) {
bulk.execute();
bulk = db.collection.initializeOrderedBulkOp();
}
});
});
if ( count % 1000 != 0 )
bulk.execute();
The .aggregate() portion there will work when there is a "unique" identifier for the array or all content for each element forms a "unique" element itself. This is due to the "set" operator in $setDifference used to filter any false values returned from the $map operation used to process the array for matches.
If your array content does not have unique elements you can try an alternate approach with $redact:
db.collection.aggregate([
{ "$match": { "events.handled": 1 } },
{ "$redact": {
"$cond": {
"if": {
"$eq": [ { "$ifNull": [ "$handled", 1 ] }, 1 ]
},
"then": "$$DESCEND",
"else": "$$PRUNE"
}
}}
])
Where it's limitation is that if "handled" was in fact a field meant to be present at other document levels then you are likely going to get unexepected results, but is fine where that field appears only in one document position and is an equality match.
Future releases ( post 3.1 MongoDB ) as of writing will have a $filter operation that is simpler:
db.collection.aggregate([
{ "$match": { "events.handled": 1 } },
{ "$project": {
"events": {
"$filter": {
"input": "$events",
"as": "event",
"cond": { "$eq": [ "$$event.handled", 1 ] }
}
}
}}
])
And all releases that support .aggregate() can use the following approach with $unwind, but the usage of that operator makes it the least efficient approach due to the array expansion in the pipeline:
db.collection.aggregate([
{ "$match": { "events.handled": 1 } },
{ "$unwind": "$events" },
{ "$match": { "events.handled": 1 } },
{ "$group": {
"_id": "$_id",
"events": { "$push": "$events" }
}}
])
In all cases where the MongoDB version supports a "cursor" from aggregate output, then this is just a matter of choosing an approach and iterating the results with the same block of code shown to process the Bulk update statements. Bulk Operations and "cursors" from aggregate output are introduced in the same version ( MongoDB 2.6 ) and therefore usually work hand in hand for processing.
In even earlier versions then it is probably best to just use .find() to return the cursor, and filter out the execution of statements to just the number of times the array element is matched for the .update() iterations:
db.collection.find({ "events.handled": 1 }).forEach(function(doc){
doc.events.filter(function(event){ return event.handled == 1 }).forEach(function(event){
db.collection.update({ "_id": doc._id },{ "$set": { "events.$.handled": 0 }});
});
});
If you are aboslutely determined to do "multi" updates or deem that to be ultimately more efficient than processing multiple updates for each matched document, then you can always determine the maximum number of possible array matches and just execute a "multi" update that many times, until basically there are no more documents to update.
A valid approach for MongoDB 2.4 and 2.2 versions could also use .aggregate() to find this value:
var result = db.collection.aggregate([
{ "$match": { "events.handled": 1 } },
{ "$unwind": "$events" },
{ "$match": { "events.handled": 1 } },
{ "$group": {
"_id": "$_id",
"count": { "$sum": 1 }
}},
{ "$group": {
"_id": null,
"count": { "$max": "$count" }
}}
]);
var max = result.result[0].count;
while ( max-- ) {
db.collection.update({ "events.handled": 1},{ "$set": { "events.$.handled": 0 }},{ "multi": true })
}
Whatever the case, there are certain things you do not want to do within the update:
Do not "one shot" update the array: Where if you think it might be more efficient to update the whole array content in code and then just $set the whole array in each document. This might seem faster to process, but there is no guarantee that the array content has not changed since it was read and the update is performed. Though $set is still an atomic operator, it will only update the array with what it "thinks" is the correct data, and thus is likely to overwrite any changes occurring between read and write.
Do not calculate index values to update: Where similar to the "one shot" approach you just work out that position 0 and position 2 ( and so on ) are the elements to update and code these in with and eventual statement like:
{ "$set": {
"events.0.handled": 0,
"events.2.handled": 0
}}
Again the problem here is the "presumption" that those index values found when the document was read are the same index values in th array at the time of update. If new items are added to the array in a way that changes the order then those positions are not longer valid and the wrong items are in fact updated.
So until there is a reasonable syntax determined for allowing multiple matched array elements to be processed in single update statement then the basic approach is to either update each matched array element in an indvidual statement ( ideally in Bulk ) or essentially work out the maximum array elements to update or keep updating until no more modified results are returned. At any rate, you should "always" be processing positional $ updates on the matched array element, even if that is only updating one element per statement.
Bulk Operations are in fact the "generalized" solution to processing any operations that work out to be "multiple operations", and since there are more applications for this than merely updating mutiple array elements with the same value, then it has of course been implemented already, and it is presently the best approach to solve this problem.
First: your code did not work because you were using the positional operator $ which only identifies an element to update in an array but does not even explicitly specify its position in the array.
What you need is the filtered positional operator $[<identifier>]. It would update all elements that match an array filter condition.
Solution:
db.collection.update({"events.profile":10}, { $set: { "events.$[elem].handled" : 0 } },
{
multi: true,
arrayFilters: [ { "elem.profile": 10 } ]
})
Visit mongodb doc here
What the code does:
{"events.profile":10} filters your collection and return the documents matching the filter
The $set update operator: modifies matching fields of documents it acts on.
{multi:true} It makes .update() modifies all documents matching the filter hence behaving like updateMany()
{ "events.$[elem].handled" : 0 } and arrayFilters: [ { "elem.profile": 10 } ]
This technique involves the use of the filtered positional array with arrayFilters. the filtered positional array here $[elem] acts as a placeholder for all elements in the array fields that match the conditions specified in the array filter.
Array filters
You can update all elements in MongoDB
db.collectioname.updateOne(
{ "key": /vikas/i },
{ $set: {
"arr.$[].status" : "completed"
} }
)
It will update all the "status" value to "completed" in the "arr" Array
If Only one document
db.collectioname.updateOne(
{ key:"someunique", "arr.key": "myuniq" },
{ $set: {
"arr.$.status" : "completed",
"arr.$.msgs": {
"result" : ""
}
} }
)
But if not one and also you don't want all the documents in the array to update then you need to loop through the element and inside the if block
db.collectioname.find({findCriteria })
.forEach(function (doc) {
doc.arr.forEach(function (singlearr) {
if (singlearr check) {
singlearr.handled =0
}
});
db.collection.save(doc);
});
I'm amazed this still hasn't been addressed in mongo. Overall mongo doesn't seem to be great when dealing with sub-arrays. You can't count sub-arrays simply for example.
I used Javier's first solution. Read the array into events then loop through and build the set exp:
var set = {}, i, l;
for(i=0,l=events.length;i<l;i++) {
if(events[i].profile == 10) {
set['events.' + i + '.handled'] = 0;
}
}
.update(objId, {$set:set});
This can be abstracted into a function using a callback for the conditional test
The thread is very old, but I came looking for answer here hence providing new solution.
With MongoDB version 3.6+, it is now possible to use the positional operator to update all items in an array. See official documentation here.
Following query would work for the question asked here. I have also verified with Java-MongoDB driver and it works successfully.
.update( // or updateMany directly, removing the flag for 'multi'
{"events.profile":10},
{$set:{"events.$[].handled":0}}, // notice the empty brackets after '$' opearor
false,
true
)
Hope this helps someone like me.
I've been looking for a solution to this using the newest driver for C# 3.6 and here's the fix I eventually settled on. The key here is using "$[]" which according to MongoDB is new as of version 3.6. See https://docs.mongodb.com/manual/reference/operator/update/positional-all/#up.S[] for more information.
Here's the code:
{
var filter = Builders<Scene>.Filter.Where(i => i.ID != null);
var update = Builders<Scene>.Update.Unset("area.$[].discoveredBy");
var result = collection.UpdateMany(filter, update, new UpdateOptions { IsUpsert = true});
}
For more context see my original post here:
Remove array element from ALL documents using MongoDB C# driver
$[] operator selects all nested array ..You can update all array items with '$[]'
.update({"events.profile":10},{$set:{"events.$[].handled":0}},false,true)
Reference
Please be aware that some answers in this thread suggesting use $[] is WRONG.
db.collection.update(
{"events.profile":10},
{$set:{"events.$[].handled":0}},
{multi:true}
)
The above code will update "handled" to 0 for all elements in "events" array, regardless of its "profile" value. The query {"events.profile":10} is only to filter the whole document, not the documents in the array. In this situation it is a must to use $[elem] with arrayFilters to specify the condition of array items so Neil Lunn's answer is correct.
Actually, The save command is only on instance of Document class.
That have a lot of methods and attribute. So you can use lean() function to reduce work load.
Refer here. https://hashnode.com/post/why-are-mongoose-mongodb-odm-lean-queries-faster-than-normal-queries-cillvawhq0062kj53asxoyn7j
Another problem with save function, that will make conflict data in with multi-save at a same time.
Model.Update will make data consistently.
So to update multi items in array of document. Use your familiar programming language and try something like this, I use mongoose in that:
User.findOne({'_id': '4d2d8deff4e6c1d71fc29a07'}).lean().exec()
.then(usr =>{
if(!usr) return
usr.events.forEach( e => {
if(e && e.profile==10 ) e.handled = 0
})
User.findOneAndUpdate(
{'_id': '4d2d8deff4e6c1d71fc29a07'},
{$set: {events: usr.events}},
{new: true}
).lean().exec().then(updatedUsr => console.log(updatedUsr))
})
Update array field in multiple documents in mongo db.
Use $pull or $push with update many query to update array elements in mongoDb.
Notification.updateMany(
{ "_id": { $in: req.body.notificationIds } },
{
$pull: { "receiversId": req.body.userId }
}, function (err) {
if (err) {
res.status(500).json({ "msg": err });
} else {
res.status(200).json({
"msg": "Notification Deleted Successfully."
});
}
});
if you want to update array inside array
await Booking.updateOne(
{
userId: req.currentUser?.id,
cart: {
$elemMatch: {
id: cartId,
date: date,
//timeSlots: {
//$elemMatch: {
//id: timeSlotId,
//},
//},
},
},
},
{
$set: {
version: booking.version + 1,
'cart.$[i].timeSlots.$[j].spots': spots,
},
},
{
arrayFilters: [
{
'i.id': cartId,
},
{
'j.id': timeSlotId,
},
],
new: true,
}
);
I tried the following and its working fine.
.update({'events.profile': 10}, { '$set': {'events.$.handled': 0 }},{ safe: true, multi:true }, callback function);
// callback function in case of nodejs
I have a collection full of products each of which has a subdocument array of up to 100 variants (SKUs) of that product:
e.g.
{
'_id': 12345678,
'handle': 'my-product-handle',
'updated': false
'variants': [
{
'_id': 123412341234,
'sku': 'abc123',
'inventory': 1
},
{
'_id': 123412341235,
'sku': 'abc124',
'inventory': 2
},
...
]
}
My goal is to be able to update the inventory quantity of all instances of a SKU number. It is important to note that in the system I'm working with, SKUs are not unique. Therefore, if a SKU shows up multiple times in a single product or across multiple products, they all need to be updated to the new inventory quantity.
Furthermore, I need the "updated" field to be changed to "true" *only if the inventory quantity for that SKU has changed"
As an example, if I want to update all instances of SKU "abc123" to have 25 inventory, the example of above would return this:
{
'_id': 12345678,
'handle': 'my-product-handle',
'updated': true
'variants': [
{
'_id': 123412341234,
'sku': 'abc123',
'inventory': 25
},
{
'_id': 123412341235,
'sku': 'abc124',
'inventory': 2
},
...
]
}
Thoughts?
MongoDB 3.6 has introduced the filtered positional operator $[<identifier>] which can be used to update multiple elements of an array which match an array filter condition. You can read more about this operator here: https://docs.mongodb.com/manual/reference/operator/update/positional-filtered/
For example, to update all elements of the variants array where sku is "abc123" across every document in the collection:
db.collection.update({}, { $set: { "variants.$[el].inventory": 25 }}, { multi: true, arrayFilters: [{ "el.sku": "abc123"}] })
Unfortunately I'm not aware of any way in a single query to update a document's field based on whether another field in the document was updated. This is something you would have to implement with some client-side logic and a second query.
EDIT (thanks to Asya's comment):
You can do this in a single query by only matching documents which will be modified. So if nMatched and nModified are necessarily equal, you can just set updated to true. For example, I think this would solve the problem in a single query:
db.collection.update({ variants: { $elemMatch: { inventory: { $ne: 25 }, sku: "abc123" } } }, { $set: { "variants.$[el].inventory": 25, updated: true }}, { multi: true, arrayFilters: [{ "el.sku": "abc123"}] })
First you match documents where the variants array contains documents where the sku is "abc123" and the inventory does not equal the number you are setting it to. Then you go ahead and set the inventory on all matching subdocuments and set updated to true.