I'm fairly new to mongodb, just a couple of months. I just converted my mongodb database to support a secondary replica set so I can watch collections. I only added one secondary which I'm guessing now may not be the best after reading you should create an odd number, but it is a localhost on one machine. I went through the instructions, got replication working fine for for half a day running my programs. But for some reason recently it has switched the database for port 27017 from primary to secondary. Primary was previously on localhost:27017 and secondary was on localhost:27027. Now my normal program can't connect to localhost:27017 without an error, which I believe it is because it is a secondary replica set now when it was primary before, assuming you can only connect to a primary. Here is the error msg.
Exception in thread "main" com.mongodb.MongoNotPrimaryException: Command failed with error 10107 (NotWritablePrimary): 'not master' on server localhost:27017.
I'm perplexed why mongodb switched the replica set primary in the first place. I doubt an error occurred, but certainly possible, but I haven't had a single "localhost" error in months of development.
For now, ideally how would I switch 27017 back to be the primary. How do I do that so my existing programs can function again?
Eventually when in production, what is the best methodology to handle this, assuming a lookup to a DNS entry to an ip address and suddenly the primary gets changed because of a fail over?
Given question 3 is a bit more involved, is there something I can do in my development environment to better simulate a production environment.
I use StackOverflow extensively but this is my first post so thanks for anyone who can provide advice.
Without knowing more about the replica configuration and circumstances of the switch over I'm not sure anyone could confidently answer question 1 but it may not be important compared to question 3.
When you want to manually switch the primary you can manipulate the priority settings:
https://docs.mongodb.com/manual/tutorial/force-member-to-be-primary/
Or run manual commands to freeze or step down the current primary:
https://docs.mongodb.com/manual/tutorial/force-member-to-be-primary/#force-a-member-to-be-primary-using-database-commands
The safest option is to ensure your application is aware of all replicas in the replica set. Then when you have these situations where something unexpected has happened the application will fail over to a writable db without any issues.
https://mongodb.github.io/mongo-java-driver/3.4/driver/tutorials/connect-to-mongodb/#connect-to-a-replica-set
I can only suggest setting up some VMs or containers as replica set members to better represent a production environment.
https://hub.docker.com/_/mongo
I was able to solve the problem by using the connect string which comprised both replica sets, which I was unaware I needed to do. Such as for java:
mongoClient = MongoClients.create("mongodb://localhost:27017,localhost:27027");
This also worked for Mongo Compass so I was able to connect to the secondary database. I didn't know you needed to provide paths to all replica sets when trying to connect, but in retrospect makes goods sense if something is down.
If you need a replica set for testing, you can create a single-node RS. Follow the instructions for creating a RS but only add one node.
Related
I am using MongoDB with Loopback in my application with a loopback connector to the MongoDB. My application was working fine but now it throws an error
not master and slaveOk=false.
try running rs.slaveOk() in a mongoDB shell
You are attempting to connect to secondary replica whilst previously your app (connection) was set to connect likely to the primary, hence the error. If you use rs.secondaryOk() (slaveOk is deprecated now) you will possibly solve the connection problem but it might not be what you want.
To make sure you are doing the right thing, think if you want to connect to the secondary replica instead of primary. Usually, it's not what you want.
If you have permissions to amend the replica configuration
I suggest to connect using MongoDB Compass and execute rs.status() first to see the existing state and configuration for the cluster. Then, verify which replica is primary.
If necessary, adjust priorities in the replicaset configuration to assign primary status to the right replica. The highest priority number sets the replica as primary. This article shows how to do it right.
If you aren't able to change the replica configuration
Try a few things:
make sure your hostname points to the primary replica
if it is a local environment issue - make sure you added your local replica hostnames to the /etc/hosts pointing to 127.0.0.1
experiment with directConnection=true
experiment with multiple replica hosts and ?replicaSet=<name> - read this article (switch tabs to replica)
The best bet is that your database configuration has changed and your connection string no longer reflects it correctly. Usually, slight adjustments in the connection string are needed or just checking to what instance you want to connect.
We are currently setting up our mongodb environment for production. At the moment we only have one dedicated mongodb database server. We will expand this in the near future with a 2nd server and I already indicated to the management that for the ideal situation we should get a 3rd server as well.
Since I already know we're going to use sharding and replication in the near future I want to be prepared for it.
The idea I have now is to start now with the Development Configuration (as mongo's documentation names it).
Whenever our second server comes available I would like to expand this setup to a configuration with 2 configuration servers en 2 shards (replica sets).
And of course when our third server comes available have the fully functional sharded cluster configuration.
While reading mongo's documentation I was getting triggered by the note that de Development setup should not be used in production.
MongoDb Development Configuration
Keeping in mind that we will add more servers soon, would it be a bad idea to already configure the Development Configuration already so we can easily add the 2nd server to the cluster when it comes available?
After setting up the 'development sharded setup' I've found my anwser. Of course i'm happy to share in case anybody runs into the same questions as I do when starting with this.
In my case, it was ok to start with the development setup untill my new servers arrived. It was a temporary situation and when my new servers arived I was able to easily expand my replicasets. There are a number of reasons why this isn't adviced for production:
To state the obvious, there is no replication yet. Since I was running shards on one machine there is a single point of failure. If the machine, or one node goes down, the cluster won't work anymore.
Now this part is interesting. After I added a second server, I did have primary and secondary nodes. Primary nodes were used for writing and secondary for reading. I've eliminated the issue that there was no replication AND my data had a higher availability. However, I noticed with the 2-member replica sets, if one member of the replicaset went down (even is this was a secondary), the primary stepped down to a secondary node as well. This had to do with the voting mechanism that MongoDb uses. See Markus' more detailed answer on this.. Since there are no more primaries in the replicaset, my cluster won't function anymore. Now, if i were to use an arbiter I could eliminate this problem as well.
When you have a 3-member replicataset, automatic failover kicks in. Whenever a node goes down, another primary is assigned automatically and the cluster will continue performing as before.
During my tests I also got to a point where one of my MongoD.exe instances stopped working due to a "Out of memory exception". I was running a cluster with 3 replicasets, meaning every machine had at least 4 mongod.exe processes running (3 for the replicaset shards and one for the configuration server replicaset). Besides having a query which wasn't optimized yet I also noticed that the WiredTiger storage engine by default can use up to 50% of ram minus one gigabyte. Perhaps it wasn't the best choise to have multiple replicaset-shards on one machine but I was able to eliminate the problem by capping the wiredtiger memory usage.
I hope this answer helps anybody who's starting to set up replication and sharding for MongoDb.
I would like to have Mongo on a server, then to replicate this onto a laptop.
The laptop is needed to leave the network and still be able to read/write, and once back on the network sync these changes with the primary.
At the same time I need the VM (Primary), to still be accessible (read/write).
So when each device is not talking to each other then for them to make themselves primary.
I have set up a very basic replica, Primary on a VM and the Secondary on the machine running the VM. In all examples I have seen it recommends having 3 servers for the replica, but I only need 2!
A couple of questions:
Is this possible with Mongo? If not then any suggestions!
When I turn off the Network adapter on the VM(Primary), the secondary doesn't seem to want to become the primary.
Is it possible to run 2 instance of Mongo, and then use the other instance as the 3 member of the replica.
Any advice would be great, thanks.
MongoDB always needs even number servers. in your case it should be like one primary one secondary and one arbiter. arbiter server instance is responsible for electing new server as primary when current primary goes down.
We are using MongoDB in production environment and now, due to some issues of current servers, I'm going to change the server and start a new MongoDB instance.
We have a replica set and a single mongod instance (two different MongoDB networks for different purposes). Now, first I should migrate the single mongod instance and then the whole replica set to the new server.
What I want to know is, how can I migrate both instances with no down-time? I don't want to shutdown the server or stop write operations.
Thanks in advance.
So first of all you should never run mongodb as a single instance for production. At a minimum you should have 1 primary, 1 secondary and 1 arbiter.
Second, even with a replica set you will always have a bit of write downtime when you switch primaries, as writes are not possible during the election process. From the docs:
IMPORTANT Elections are essential for independent operation of a
replica set; however, elections take time to complete. While an
election is in process, the replica set has no primary and cannot
accept writes. MongoDB avoids elections unless necessary.
Elections are going to occur when for example you bring down the primary to move it to a new server or virtual instance, or upgrade the database version (like going from 2.4 to 2.6).
You can keep downtime to a minimum with an existing replica set by setting the appropriate options to allow queries to run against secondaries. Again from the docs:
Maintaining availability during a failover. Use primaryPreferred if
you want an application to read from the primary under normal
circumstances, but to allow stale reads from secondaries in an
emergency. This provides a “read-only mode” for your application
during a failover.
This takes care of reads at least. Writes are best dealt with by having your application retry failed writes, or queue them up.
Regarding your standalone the documented procedures for converting to a replica set are well tested and can be completed very quickly with minimal downtime:
http://docs.mongodb.org/manual/tutorial/convert-standalone-to-replica-set/
You cannot have no downtime (a new mongod will run on new IP so you need to at least connect to it). But you can minimize downtime by making geographically distributed replica set.
Please Read
http://docs.mongodb.org/manual/tutorial/deploy-geographically-distributed-replica-set/
Use the given process but please note:
Do not set priority 0 of instances at New Location so that they become primary when old ones at Old Location step down.
You still need to restart mongod in replica set mode at Old Location.
You need 3 instances including an arbiter at New Location, if you want it to be
replica set.
When complete data is in sync with instances at New Location, step down instances at Old Location (one by one). Now everything will go to New Location but the problem is that it is directed through a distant mongod.
So stop mongod at Old Location and start a new one at new Location. Connect your applications to New Location Mongod.
Note: I have not done the same so far. I had planned it once but then I got the problem and it was not of hosting provider. Practically you may get some issues.
Replica Set is the feature provided by the Mongodb database to achieve high availability and automatic failover.
It is kinda traditional master-slave configuration but have capability of automatic failover.
It is basically group/cluster of the mongod instances which communicates, replicates to each other to provide high availability and to do automatic failover
Basically, in replica sets there are minimum 2 and maximum of 12 mongod instances can exist
In replica set following types of server exist. out of all, one server is always primary.
http://blog.ajduke.in/2013/05/31/setup-mongodb-replica-set-in-4-steps/
John answer is right, btw in your case you have no way to avoid downtime, you can just try to make it shorter as possible.
You can prepare the new replica set and save its configuration.
Same for the single mongod instance, prepare a js file with specific configuration (ie: stuff going on the admin database).
disable client connections on production servers.
copy the datafiles from the old servers to the new ones (http://docs.mongodb.org/manual/core/backups/#backup-with-file-copies)
apply your previous saved replica set config and configuration.
done
you can use diffent ways as add an hidden secondary member on the replica set if you have a lot of data, so you can wait it's is up-to-date before stopping the production server. Basically for the replica set you have many ways to handle a migration, with the single instance instead you don't have such features.
I never have my hands on coding. I got a doubt regarding mongodb replica sets
below is the situation
I have an alert monitoring application.
It is using mongodb with replica set with 3 nodes.
Applications Java code base keep connecting to the primary and doing some transactions.
Now my question is that,
if the primary server is down, how will it effect the application server.
I mean, would the app server writes error saying connection failed like errors.
OR
the replica set will pick one of the slaves automatically as master and provides the application server to do its activity. How will it happen...?
Thanks & Regards,
UDAY
The replica set will try to pick another server as the new primary. If you have three nodes, and one goes down, the other two will negotiate which one becomes the new master. If two go down, or somehow communication between the remaining breaks down, there will be no new master until the situation is recovered.
The official drivers support this automatic fail-over, as does the mongos routing server if you use it. So the application code does not need to do anything here.
I am not sure if there will be connection errors during the brief period of time this fail-over negotiation takes (you will probably get errors for a few seconds).