I like to have my own devcontainer added in the dropdown menu in vscode beside the predefineds like C++.
I just copied my own .devcontainer to ~/.vscode/extensions/ms-vscode-remote.remote-containers-0.194.0/dist/node_modules/vscode-dev-containers/containers/cpp_kurs and it perfectly does what I want.
But I guess it is a little bit dirty and will be gone when the extension gets updated at least because the version number in is the folder name.
Is there a clean, good and stable way of doing this (I don't want to fork the plugin and maintain it)?
Related
In sublime, when I drag a new folder into the editor, it gets added at the bottom of the list in the sidebar, but in VS Code, the old project is removed from the list on only the current project is active.
Is there any way to make VS Code sidebar hold the old projects as sublime did? (PS: I am new to VS Code)
Here is a comparison of Sublime sidebar and VS Code sidebar.
EDIT: I have tried the VS Code Insiders edition, The add to workspace option kind of works, but is not the exact solution of what I was looking for. Because even if you add multiple folders to the workspace, the next time you drag and drop a folder in VS Code, The workspace will get replaced with the new folder which you opened. I want that old folder to remain in the sidebar, and the newer folder to open below it like in sublime (see the image for reference).
Use Insiders version of vscode. There was introduces a feature called multi-root workspace. In nutshell: you can open multiple folders in 1 vscode window (drag-n-drop supported too).
I would like to have an additional feature in Visual Studio Code - essentially the "Scope to This" from the full Visual Studio Solution Explorer.
It is basically a context menu (right click) entry in the File Explorer of Visual Studio Code - which then should limit which files and folders are displayed.
Is such a thing possible with a Visual Studio Code Extension?
I never built an extension for VS Code before and would like to know if this is even possible or if I would just waste my time.
According to the API docs, there is no way to filter visible files in the Explorer like it can usually be done with the files.exclude setting. However, it is possible to open another folder with the workspace.openFolder complex command. This will probably also close all opened editors, and forget about the original workspace root path.
Your extension would need to remember the initial root path and opened editors to undo this "Scope to This" menu, and reopening everything every time could cause quite some lag.
You can't customize the normal explorer view.
However, you can do something like this with custom views. It allows you to create a new explorer view that can list what you want and behave as you want.
For an example implementation, check the vscode-code-outline.
If you can add a context menu entry separately too.
What I want to do is simply use the eclipse package explorer in hierarchical view but with empty packages being collapsed so I don't have to open 5+ packages to find the first Java file.
I'm not even sure how I did it in previous versions, but I've never had any trouble finding it before, it just seems to be gone now. I have a feeling there was a "flatten hierarchy" tick-box somewhere.
To clarify I get this:
com
example
etc
file1.java
Rather than:
com.example.etc
file1.java
I'm using Eclipse Indigo (v. 3.7.1)
Open the View menu (small triangle in top right corner), open filters and check Empty parent packages.
In most cases it works, but in case of existing projects it does not always work as expected. If you seem to have troubles, try to export the project, remove it, then re-add the exported version (or re-checkout from your VCS).
Assuming the view filter is engaged properly, perhaps your source folders are not as "empty" as you think.
For example, on Apple OS X, Eclipse will detect .DS_STORE entires along your src/package/hierarchy, making the parent packages technically non-empty.
Delete any such hidden files and refresh your project.
Window - Preferences - Java - Appearance - Abbreviate package names
And enter the following rule:
com.example.etc={cee}
I don't know what the problem actually was, but I couldn't get it fixed until I gave up altogether and reinstalled the OS (it was a fresh install anyway), and eclipse. It was completely fine after that. :\
Click on the arrow at the top right of the "Package explorer" and choose "Package presentation -> flat"
Try to restart Eclipse once in a while. I had trouble getting it to work, and after an Eclipse restart it suddenly was working again.
In Eclipse, if I change a file programmatically, and it is open in a text editor, it doesn't always reload, not even when refreshing the resource programmatically. How can I forcibly reload the text editor from code so that it show the changed file contents?
In your project explorer or navigator, you can right-click on the file that's currently open and select refresh. This has always worked for me, even when editing files with several programs. Make sure to click the file itself, not parent objects like packages or folders or projects.
Edit
Refreshing programmatically? I would look into an Eclipse scripting tool:
http://eclipse-shell.sourceforge.net/
I guess there was another one called Monkey, but it doesn't appear to be maintained.
I don't know of any possibility to programmatically reload the file.
Some editors (e.g. GMF editors) look for changes in the underlying files, and refresh themselves, but this is not required at all.
I don't think that a forced reload is an option implemented globally, as in some cases there could be some merging steps involved that can be quite erroneous.
My ideas to solve this:
Have a specific editor that refreshes its content when the used resource changes (this can be timeconsuming);
Or close the editors of the file and reopen them (this is ugly in the eye of the user).
Since the Luna release of eclipse there's no need to reload files with F5/manual Refresh.
Really nice, especially as there was a bug with the F5 key binding.
Is there a shortcut in Eclipse for "open project"? Ideally, I'd like something like the "Open Resource" dialog.
I want this because I have a "testing" project, which I use whenever I want to try something out… But it's annoying to scroll through the massive Navigator trying to find it and click it when it gets closed.
Not by default. The action is defined here, with no keyboard shortcut.
http://eclipse-tools.sourceforge.net/Keyboard_shortcuts_(3.0).pdf
You could add a Working Set that contains only your test project, and use 'Select Working Set...' functionality from the Navigator tab's view menu:
While this won't open the project for you, it WILL make it the only thing you see in navigator or package explorer.
Once you've added it, it will be in a list and you won't need to open the 'Select Working Set...' dialog, just select 'my test project' from the popup menu. It's triggered by that small triangle in the upper right of Navigator, I'm not sure if there is a shortcut.
To switch back to your normal work, simply 'Deselect Working Set' and you will then see everything again.
I also find the 'Collapse All' button/shortcut to be handy when finding things in the Package Explorer or Navigator tabs.
I'll offer a solution to a problem I've had which, if I've interpreted the question correctly, is very similar to yours.
I find that when I have a lot of projects with loads of expanded directories/packages inside Project Explorer, trying to find a particular project is irritating because I have to scroll through all this. I could collapse all projects down but then I also lose my current position in every project.
I'd just like to be able to search for a particular project by name and open it, in the Project Explorer tree. Opening a file inside the project using Open Resource isn't a good enough workaround, as having to think of the name of a file inside that project completely out of context is often equally annoying!
A solution that works great (at least in Eclipse Juno, Mac OSX) is, with the Project Explorer focused, to hold Shift and start typing the project name. This dynamically selects the best matching project in the Explorer as you type. Then with your hands still on the keyboard you can use the arrow keys to open up and browse the project.
It ain't pretty but it gets the job done, and saves some valuable seconds :)
You could also:
switch workspace (in a workspace with only this test project in it) (no shortcut: you can define one)
install mylyn and select a "test" task (which would immediately empty your Navigator view, leaving only the relevant classes/methods).
If the test project is already opened and you know the name of the class in it, you could go to this class with Navigate -> Open Type (There is a shorcut also, on mac osx is Shift + Command + T)
I find it easier to move with this method, but I didn't know it until someone else showed me, maybe it helps.
You can set a shortcut at Preferences->General->Keys, search for Open Project. However, for me it does not work from the editor itself. I have to click the package explorer, for example. Also, if you have a lot of projects, there will be a huge list of them as well, as expected.