I am wonder, if it is way how to enable autocompletion for WDIO global variables ( $, $$, browser ) in VSCode. I know, that wdio has support for Webstorm, but it doesn't work for VSCode.
Any idea, how to use autocompletion in VSCode? Without it is pretty hard to create some tests.
I struggled with this as well. Firstly, ensure you've followed the "Autocompletion" Setup described on the website; for example, they require something like the following exist in a file called jsconfig.json at the root of your project:
{
"include": [
"**/*.js",
"**/*.json",
"node_modules/#wdio/sync",
"node_modules/#wdio/mocha-framework"
]
}
You may already have a jsconfig.json; if so, ensure that the node_modules directories are not in a section called "exclude": { ... }. When setting up other things like Babel (for mocha) this may get installed as a default configuration entry. When node_modules is in both include and exclude, exclude takes precedence.
I had zero success importing npm #types pacakges, adding typeAcquisition: {} to jsconfig.json, or adding interface browser; into the file global.d.ts as other people have suggested in various forums.
Auto completion is pre-installed on vs code. If it is not working you might want to check through extension and install. And to use, once the open tag is created, it often auto suggest, just do appropriately then input your attribute.
I installed TYPO3 7.6.4 (LTS). I then went to backend, downloaded German language and under User preferences i changed my admin language to "German". After clearing the caches and relogging, nothing has changed.
TYPO3 tells me that the language files have been downloaded successfully, but there is no data in the directory typo3conf/l10n/
it's just empty. All folder access rights are 777.
Any suggestions?
You have to enable "curlUse" from backend installtool or in LocalConfiguration.php
'SYS' => [
'curlUse' => '1',
]
For example:->
So After that you will be able to download language as well as available translation files of extensions.
After that you can enable it from user settings
did you have use the "user Settings" button at the Top?
What are the recommended steps to upgrade TYPO3 4.5 (or 6.1) to 6.2? I have a mac and my site is running on a shared Linux account.
Here's a step by step guide from my upgrading practice which I would like to share. Thanks for the guide on https://jweiland.net/typo3/vortraege/typo3camp-berlin-2014.html that has helped me a lot.
Note that these are my personal experiences which may or may not apply to your environment. Treat everything carefully.
I differentiate between "Quick" and "Long" upgrades. With "Long" upgrades, you do the upgrading twice. First, you upgrade a copy of the live site, get all extensions and templates working, and when you're ready, you declare the content freeze, re-doing the upgrade, using the files modified in the first step. For a "Quick" upgrade, you declare a content freeze right away, do the upgrade and tests, and then deploy to the test or live environment directly.
Set up the site locally
When you're ready to freeze the content (BE][adminOnly] = 0), don't forget to check if the site has user contributed content? If so, either disable the possibility to submit it, or note which tables you have to re-import after enabling the upgraded site.
Hint:
Work locally. I can only refer to using MAMP Pro (be sure to get the
pro version) on a mac. Always be aware on which site (and with which
DB) you are working, btw! And attention: OS X file system is case
insensitve, which can be a bummer when deploying to Linux (see below).
For the database administration, I prefer http://www.sequelpro.com/ to
phpMyAdmin for most tasks. It's very handy to make backups or to
quickly browse tables, although it has a few missing features in
comparison with phpMyAdmin. It is also extremely reliable for
importing dbs onto a live server - where phpMyAdmin can stall often.
Beware if [SYS][UTF8filesystem] is set: transferring files to OS X via popular (S)FTP clients like Coda or Transmit (haven't tested Cyberduck) can damage the filenames containing UTF-8 filenames. Thus all links to such files will be invalid when you deploy. Pack them into an archive befor transferring or use scp. Avoid the setting in the first place.
Create your local TYPO3 instance. It's practical if you keep an "old" and a "new" core in the same location, so you can switch between them easily by symlink. Create and connect the local database.
Hint:
If you're working on MAMP, you'll have to chown all the files (except
templates and config files of your apps (like Sublime)) to _www:_www.
I have found it useful to define some aliases for the sudo chown in
~/.bash_profile, like alias chownmamp="sudo chown -R _www:_www ."
and vice versa to your own user. Another possibility might be to
temporarily chmod 777 everything - when deploying, taking extra care
this is removed (find . -type f -exec chmod 644 {} \;find . -type d -exec chmod 755 {} \;)
Duplicate the site and the DB to keep an un-upgraded version for comparison - even after you've deployed
Init a local git repo, don't forget to add .gitignore for temp data. Commit from time to time!
Hint:
If you use different hostnames for your local and the live site,
replace them where needed. For the command line, I have found grep -rl 'www.site.ch' ./ | xargs sed -i 's/www.site.ch/www.localsite.dev/g' useful. But of course you can
do that in your IDE or editor too. Don't forget to check
realurl_conf.php and .htaccess too. For a quick run, it is also
possible to use the real hostnames, so you don't have to replace
anything (but won't be able to compare sites from the same machine).
You should now be able to log into the backend and into the install tool
Hint: On MAMP, I've had issues with $TYPO3_CONF_VARS['BE']['warning_email_addr'] which prevented logging into the install tool with an error 500, as it couldn't sent the email. Remove that setting in localconf.php for the local upgrade if it happens.
Prep the upgrade
Make a backup of files and DB. (make frequent db dumps later on too)
Important: Install tool > Database Analyser > Clear Tables: clear all caches, logs, also the history data (if that's ok with you). The less huge the database is, the smoother the upgrade will go.
Get the frontend running.
Also, make sure you have the admin Panel. It's very helpful to override TYPO3 caching and to debug performance bottlenecks. Also, you can reliably force TS rendering at every reload. Set config.admPanel = 1 in page TS, enable it in your admin user's TS by admPanel=1, and log in with the domain you will be viewing the FE from. The adminPanel only shows up if you're logged in on that domain! While you're there, also add options.clearCache.system = 1 to the admin's TS, so you can clear the system cache also when in production mode.
Install http://typo3.org/extensions/repository/view/smoothmigration and run it. Fix the issues you can fix now, e.g. UTF8 issues in the DB. Copy the remaining report and save it in a word file or similar - you can't run smoothmigration after the upgrade anymore
Go through all extensions. Do we need them at all? You can find out if a plugin is used with (for example) SELECT * FROM tt_content WHERE list_type = 'news_pi1' or by looking at all cType = 'list' entries in tt_content. If it's not used, consider removing the extension too. Or can it be replaced by a better extension, or re-built by hand / via tt_content? (For example a carousel, I'd rather not have to maintain an extension for that. But check the budget! Everything takes time.
I get rid of indexed_search, as ke_search is a very reliable alternative that is quick to set up.
Hint: with FAL, the _cli_scheduler user needs rights for every file mount you want to index with ke_search, else the indexing via scheduler will fail.
Main task: Check for extension updates. If a compatible extension update is available, do it. But first check if it works with the old and the new site: http://typo3.org/extensions/repository/view/realurl : This version works for TYPO3 4.5.0 - 6.2.999 - if it doesn't, don't update yet.
Be sure to remove realurl_clearcache, the TER version will break on 6.2
When you're done removing, uninstall all remaining local extensions. You don't have to uninstall sysexts.
in typo3conf/ext we will have a quite short list of extensions now. That is good!
Backup the db and make a DB-Compare in the install tool. CAUTION: don't touch extension data you will need for importing later on (tt_news, powermail, dam). If you dare, you can rename or remove other, 100% obsolete data.
Study the "Reports" module in the BE and take the recommended actions
If you have the patience, check for broken links on the site - they may make problems when converting to FAL.
Is there content / pages that can be deleted for sure? (E.g. ancient test pages, duplicates, etc?) Delete it if you dare.
Don't forget: Empty the trash (Module "Trash") for all pages recursively. No need to migrate deleted content. Cf. https://forge.typo3.org/issues/62360 to delete many items at once
Important: Update the reference index (in the module "DB Check"). It has to be PERFECT before the upgrade.
Make that backup...again
Do the upgrade
-> Switch the core to 6.2
Reload the backend, you will land in the install tool. To connect to the DB, you may have to enter "localhost" instead of 127.0.0.1 as prefilled
Install tool: check folder structure and system environment, make it all green. Read System Environment until the bottom: "Red" items are on the top, but "blue" items (recommended) are on the bottom (e.g. a missing system locale, which is needed if you use UTF8-Filesystem).
Hint: don't be too eager with APC, the availability check
in 6.2 isn't perfect, cf. https://forge.typo3.org/issues/64030 (you
can't use it if your shared hosting relies on suPHP).
Install tool: Run the first wizard. Just the first one. Do NOT run "Migrate all file links of RTE-enabled fields to FAL" yet.
Important: Log into the backend as admin. Go to filelist, refresh the file tree if necessary. Now set the filemounts (fileadmin...) to "Use case sensitive identifiers" in it's settings. Otherwise, you may end up with all filenames in lowercase in sys_file, which will not work on the live linux system.
Also, run the task File Abstraction Layer: Update storage indexin the scheduler and update the reference index.
Install tool: Go through the rest of the upgrade Wizards. To debug broken links that can't be migrated, use the workaround from https://forge.typo3.org/issues/64122 (6.2.10 up)
Hint: If something doesn't seem to be complete after all wizards went through, you can re-enable the upgrade wizards in LocalConfiguration.php under ['INSTALL']['wizardDone']. (Like if the whole sys_file_reference table empty and there are no images in tt_content table - remove the line for TceformsUpdateWizard, so it can run again).
Important: Install tool: All Configuration: Deactivate content adapter! Else you will be running in a slow kind of compatibility mode and not really doing the entire Upgrade.
Check "Reports". Make it all green!
Install tool: Check image rendering (I prefer GD), set fitting Configuration presets
Hint: Check typo3conf/AdditionalConfiguration.php and make sure there are no values in it that override values from LocalConfiguration.php. I've had this on a 6.1->6.2 upgrade, and thus was unable to enable error logs (the devIPmask was overridden all the time).
Main task: Update and install Extensions that have updates that were not compatible with the old core.
Hint: here are a few occasional replacements I had to make
for 6.2 compatibility:
require_once(PATH_tslib . 'class.tslib_pibase.php‘);
-> if (!class_exists('tslib_pibase')) require_once(PATH_tslib . 'class.tslib_pibase.php');
require_once(PATH_t3lib . 'class.t3lib_scbase.php‘);
-> require_once(\TYPO3\CMS\Core\Utility\ExtensionManagementUtility::extPath('backend'). 'Classes/Module/BaseScriptClass.php‘);
t3lib_div::GPvar()
-> \TYPO3\CMS\Core\Utility\GeneralUtility::_GP()
mysql_num_rows($res)
-> GLOBALS['TYPO3_DB']->sql_num_rows($res)
t3lib_div::intInRange
-> t3lib_utility_Math::forceIntegerInRange
t3lib_div::view_array()
-> t3lib_utility_Debug::viewArray
t3lib_div::testInt
-> t3lib_utility_Math::canBeInterpretedAsInteger
EDIT: a much more comprehensive list is on https://github.com/FriendsOfTYPO3/compatibility6/blob/master/Migrations/Code/ClassAliasMap.php
Updating from DAM? Use https://github.com/b13/t3ext-dam_falmigration, following Installation and Scheduler Task and Usage. Be aware that with MAMP, you have to run MAMPs PHP from the command line, for example /Applications/MAMP/bin/php/php5.5.18/bin/php ./typo3/cli_dispatch.phpsh extbase help
Moving tt_news to tx_news? I've had an issue with the importer where not all translations were imported. There is a newer version now.
Updating Powermail? Nice, there is an updater! Thanks! I also encountered issues with translations. In one case, they could be solved by hitting the "localise" button for a form, though.
rlmp_tmplselector: either use https://github.com/jweiland-net/rlmp_tmplselector/ or move page type seletion to core's backend layout.
Hint: In the last case, take care, to select the page template in
accordance to the selected BE Layout, never use .if, always use CASE.
See With TYPO3 be_layout, how to choose frontend template correctly (performance-wise)?
Main Task: Templates have to be updated. Just a few things: New IMAGE / FILES TS, config.doctype=html5 (not html_5), replace all HTML Objects by TEXT. Use the TypoScript Object Browser (TSOB) at least check that there are no errors in TS.
If you haven't done it before ("Long" Upgrade), install extension after extension and fix what has to be fixed (google the errors). Install https://github.com/medialis/realurl_clearcache by hand if you need it.
Do you use imagemap_wizard? https://github.com/lorenzulrich/imagemap_wizard and add the css fix from https://forge.typo3.org/issues/58212
Hint:
Btw, extensions I use on all sites: realurl_clearcache,
nc_staticfilecache, sourceopt, ke_search. On most sites
(feature-based), of course: news, powermail.
Don't forget: Check the backend permissions of non-admin users. It may be necessary to add rights for the tables and fields of the FAL (File Abstraction Layer). If you have to modify content, use a simulated editor user to spot problems early.
Update Translations via the "Language" Module, so editors will get translated Backend and Extensions
Hint: Also make sure that the "page tree rights" group is properly set
up, cf http://typo3.uni-koeln.de/typo3-admin-access-default.html?&L=0
There may be problems with filenames containing special characters like umlauts, sometimes resulting in broken file links (I use Integrity or Scrutiny for mac to check the whole site), sometimes only in ugly filenames. Check and process manually (if FAL works, you can just rename them in the backend) if required.
Hint:
Here's a snippet I add to all user's userTSConfig.
Go through everything. If you have the time and budget, make the website better, use webpagetest.org to spot performance holes, clean the .htaccess, combine assets, check the page rendering times in the admin tool, update frontend dependencies, check 404 handling, move templates to typo3conf/ext/templates (best search-replace all paths in a dump of the db!), tidy up users and groups, move all templates from db to includes, clean up template structure etc etc - it all depends on the time you have available for that site.
Make the backup. Again.
Test and deploy
Test it on a live server! Or, if it's not a high profile site that can afford some downtime, just go live, moving files (without typo3temp) and db to the server, setting the symlinks, clearing all caches etc.
On the live system, check the install tool. Probably you'll have to adapt some php.ini settings. And set the configuration preset to "Production".
Rebuild the reference index
Check "Reports". Regarding the case sensitivity issue, you might now see missing references here - you haven't seen those on the Mac, as you the file system was case insensitive. Also, you can query sys_file for missing = 1. You could re-run the scheduler FAL task mentionned above locally to see it can fix some filenames. If there are no other means, you could still rename all files to lowercase, cf. How do I rename all files to lowercase?
Check the cronjobs and scheduler tasks (go to "Check configuration" in the scheduler module as well, see if cli user exists). Ah, also see if you're running a current php version. Also check if you don't forbid google to crawl the live version in robots.txt
Do you have to configure some backup routines or update scripts? Do it now.
And don't panic if it's not working yet. Probably it's just the cache. Or something else.
When the site has been running to satisfaction for some time, run another dbcomp and delete all old tables.
Wait. What did I forget? Will add that later.
Check the backend permissions of non-admin users. It may be necessary to add rights for the tables and fields of the FAL (File Abstraction Layer).
We do a lot of deployments of Java web applications to Weblogic and Jboss servers. Quite often the deployment looks like this:
Copy the code and default configs to a staging directory on the application server or Weblogic admin server.
Edit a properties file to set environment-specific variables (IP addresses, usernames, etc.)
Run ant to create the ear/war and drop it in the appropriate directory.
Start services
This has proven to be a very unfriendly set of steps to use with Puppet as our configuration management tool. We would prefer a process which is much more similar to the Package, File, Service trifecta of Puppet, but having to configure the properties before building the ear/war makes this difficult because it requires an extra step to build the war/ear on the host after the properties have been populated.
Is there a way to build a war/ear which is environment-agnostic and keep the configurations external, removing the extra build step?
Has anyone specifically worked with web applications and Puppet, and do you have any recommendations?
What I've done with tomcat and .war webapps is build a system package with an unzipped war and then deal with the conf files. I haven't dealt with Weblogic much or JBoss at all, so I don't know how it deals with unzipped WAR stuff.
1) Build a package (RPM) where I do all the .war building stuff, then something like:
mkdir -p %{buildroot}/var/lib/tomcat5/webapps/APP
cd %{buildroot}/var/lib/tomcat5/webapps/APP
unzip ../APP.war
rm ../APP.war
(so that the unzipped .war file is in the package with no actual .war file in there. With tomcat it will then leave that directory alone, especially if it doesn't have write access because the files belong to root)
2) Puppet stuff somewhat like:
package {
"tomcat5":
require => Package["java-1.6.0-sun"],
ensure => installed;
"java-1.6.0-sun":
ensure => installed;
"APP":
ensure => installed,
notify => Service["tomcat5"],
require => Package["java-1.6.0-sun"];
}
file {
"/usr/share/tomcat5/webapps/APP":
source => [ "puppet:///MODULE/APP" ],
ensure => directory,
ignore => [ 'CVS', '.git', '.svn', '*~' ], # ignore revision control and backup files
purge => false, # leaves other stuff alone
replace => true, # replaces stock files with ours
recurse => true, # gets everything recursively
require => Package[APP], # install package first
notify => Service[tomcat5]; # restart tomcat after
}
This particular package has 32 files in 8 directories that we're modifying or pushing out to configure it. If it was just a few files, I'd use a couple simple file{} resources to manage those files instead of the recursive stuff.
If you didn't want to build a system type package, you could do a file{} resource for the war into an alternate directory, an exec{"unzip ...": creates => '/path/to/unzipped/webapp;} and have the file{} resources for configuration require the Exec["unzip ..."].
how to make the project use the zend framework included in the library folder instead of using the installed version on the server . because sometimes the version on server is lower than the one used in the development!! is there a way to force it to use library in library directory??
Just put in before the server's path in include_path.
set_include_path(implode(PATH_SEPARATOR, array(
'/my/path/to/zf',
get_include_path(),
);
#Tomáš Fejfar 's solution is of course the standard on the fly solution. You also have a few other options though.
you can remove the "installed" version on the server (if nothing else uses it)
you can create subdirectories in the server library and use per project paths
you can skip the usage of the include path entirely and work with Symlinks, we prefer that