Not really a question but already the answer. Just to save others from spending days on this task.
What I want to do
I want to extend the basic NextCloudPi image with some custom websites including PHP. For ease use of remote debugging I am using VSCode and Xdebug.
The Problem was
I can't get a SSH connection to my raspi from VSCode and therefore also PHP debugging didn't work. SSH connection to the raspi worked well with other tools (putty, PowerShell etc.). Also Xdebug was set properly on the raspi (according to phpinfo();). In the log of the ssh-plugin of VSCode the following error appeared:
Failed to set up socket for dynamic port forward to remote port 37399: Socket closed. Is the remote port correct?
Relevant Versions
NextCloudPi 1.36.3
Xdebug 3.0.4
VSCode 1.60.2 (RemoteSSH 0.65.8, PhpDebug 1.19.0)
The Solution is
After spending evenings of googling I found out that the TCP port forwarding of the raspi's SSH service has to be enabled which is not in the basic nextcloudpi-image. This thread gave me the final clue: VSCode Remote SSH Connection Failed
So just set in /etc/ssh/sshd_config AllowTcpForwarding to yes and everything should work as easy as described in all the manuals.
Related
I'm trying to connect to a server via remote-ssh extension for Visual Studio Code, however, I'm getting the following error:
The vscode server failed to start SSH
Everything is fine on the server-side, and the connection to this host worked fine for a while.
Any suggestions to re-access the server via remote-ssh extension?
After a while, I found a solution that can be useful to others.
In VS Code press:
CTRL + SHIFT + P
Type or select the option:
Remote-SSH: kill VS Code Server on Host...
Select the host name:
And after this procedure, try connecting again to the host.
That worked for me.
In my case it was ssh plugin issue. I updated remote ssh plugin then it worked
wrong proxy setting may cause problem.
If Remote-SSH: kill VS Code Server on Host command not work for you, open settings and clear proxy setting and retry.
Everything is fine on the server-side, and the connection to this host worked fine for a while.
In case it is a simple intermittent network issue, VSCode 1.70 (July 2022) will retry the connection for you (up to 5 times)
See issue 127565 and PR 156444
Retry up to 5 times the initial authority resolving and also retry up to 5 times the initial connection
When connecting to a remote, if the initial connection fails, we will give up. The idea was that retrying would be useless, since the initial setup might have failed.
But it is possible that perhaps it was an intermittent network error.
This is available in VSCode insiders today.
Update the Remote ssh
check file groups belongs to same group if you manually copied .vscode-server
Remote-SSH: kill VS Code Server on Host...
Didn't work for me, so I tried the other option:
Remote-SSH: Uninstall VS Code Server from Host...
It took a bit more time but worked for me!
I am coming from notepad, and am learning how to work with VS Code.
I am now trying to access my online repertory on the webserver.
I followed up the guide here: https://code.visualstudio.com/docs/remote/ssh
I did manage to access my server through the terminal window.
(ssh user#domain + password).
When connecting, this shows in the log:
"Linux infong-eu27 4.4.246-icpu-061 #2 SMP Thu Nov 26 10:58:41 UTC 2020 x86_64"
This tells me that it is working on Linux.
If I type "Ls", I can see my folders and navigate among them.
So far, so good!
Second phase: Connecting through the remote explorer.
Step 1:
I configured the ssh with the same credentials I used with the terminal.
Step 2:
I am opening the remote explorer, I can see my server's name. I right click on it and select "connect".
Step 3:
I am then asking to choose the system. I am picking Linux as shown earlier when connecting through the terminal.
Step 4: I am entering the same password I used before to connect in the terminal.
Step 5: Infinite loading, or a very long one till I get 2 notifications / errors:
Could not fetch remote environment
Failed to connect to the remote extension host (error time limit..)
That being said, it also says in the bottom left corner, in the "remote window", that I am connected. This does not seems right.
Any chance someone could help?
I am frustrated because it connects in 1s using the terminal, but not in the remote explorer.
UPDATE:
I found this article on medium that paraphrases the official documentation.
https://medium.com/#sujaypillai/connect-to-your-remote-servers-from-visual-studio-code-eb5a5875e348
I managed, through Git bash, to create a ssh pair key, and managed to copy one on my server.
I then followed the instructions on how to set it up on VS Code successfully!
Now, when I try to connect, I am asked for my key pass:
But, when I do: super long loading, and the same error message.
When I looked on my server with a sftp software, I see that VS did manage to connect as files were installed in a VS folder it created:
This is reported in issue 4415 (no answer) and issue 4204
The last one includes:
This might be caused by our new automatic port forwarding feature which scans the remote OS for available ports in order to forward them locally (microsoft/vscode#112843)
This is fixed by PR 113342, for the next 1.54 Feb. 2021 release. That bug is about setting remote.autoForwardPorts to false and... still seeing VSCode auto-forward ports!
Check on your server (while VSCode attempts to connect) if:
the CPU is high
if there are any services running on public port on said server
I solved a similar issue by following the error logs from the remote ssh extension. I had to install libatomic1 on the remote server with
sudo apt-get install libatomic1
I am having trouble using the remote-ssh plugin in Visual Studio between machine A and machine B where the key is provided by KeeAgent from a KeePass database on machine A.
Machine A runs on Windows 10 and I have set up the Host (machine B) in Visual Studio Code correctly according to the guide. However, when trying to use the remote feature, I get the following error:
[09:48:32.111] Log Level: 2
[09:48:32.121] remote-ssh#0.51.0
[09:48:32.121] win32 x64
[09:48:32.124] SSH Resolver called for "ssh-remote+XXX.XXX.XXX.XXX", attempt 1
[09:48:32.125] SSH Resolver called for host: XXX.XXX.XXX.XXX
[09:48:32.125] Setting up SSH remote "XXX.XXX.XXX.XXX"
[09:48:32.314] Using commit id "91899dcef7b8110878ea59626991a18c8a6a1b3e" and quality "stable" for server
[09:48:32.317] Install and start server if needed
[09:48:38.141] getPlatformForHost was canceled
[09:48:38.142] Resolver error: Connecting was canceled
[09:48:38.147] ------
where XXX.XXX.XXX.XXX obviously is the correct IP of machine B in my output.
As I mentioned, the SSH key for this machine is provided via KeeAgent and works fine with PuTTy. I am not allowed to store a SSH key in plaintext on machine A, hence the Keepass/KeeAgent solution. I guess this is the Problem, that somehow Visual Studio Code does not work with KeeAgent.
Can I work around this, i.e. by telling VS Code to use plink.exe as SSH client, which works with KeeAgent? Or does VS Code allow the encrypted storage of SSH keys itself, thereby making KeeAgent obsolete? I am new to both VS Code and the remote-ssh plugin, so I'm sorry if my questions have obvious solutions.
Maybe the problem lies elsewhere though. In that case I am thankful for every hint.
Thanks!
Go to Options > KeeAgent, then scroll down to Agent Mode Options and activate Enable agent for Windows OpenSSH (experimental): (default: disabled) Enable an SSH agent socket compatible with the built-in Windows 10 SSH client.
Suppose I can log in to a gpu sever named gpu1.sp.sw, and there are gpu2.sp.sw and gpu3.sp.sw to which I cannot log in directly but can be reached by ssh gpu-2, ssh gpu-3, after I am already on gpu1.sp.sw.
My question is: If I want NSight 6.5 to run and debug remotely on gpu-2 or gpu-3, how can I do it?
As workaround you can use ssh tunnels: run something like
ssh gpu1.sp.sw -L2202:gpu2.sp.sw:22 -L2345:gpu2.sp.sw:2345 -nNT
in background console. Then configure NSight remote debugging to connect to server localhost, ssh port 2202 and cuda-gdbserver port 2345.
I'm trying to use Tramp/Emacs-23 in Ubuntu 12.04 in order to edit the remote host files. My remote host has two step authentication (RSA+Passwd). I use multiplexing through .ssh/config to ensure that tramp can directly connect to the remote shell without having to provide passwords.
My problem however is that I have 3 different remote hosts. When I try to connect to remote host through tramp without the initial multiplexing (through terminal), the TRAMP hangs with a message stating "Tramp: Waiting for prompts from remote shell". I used the below mentioned commands in .ssh/config to ensure the connection gets lost after a specified interval upon no prompt.
Host *
ServerAliveCountMax=30
ServerAliveInterval=5
However this doesn't seem to have any effect on the tramp connection. It will be of help if someone can help me in fixing this issue.
Sorry that your question has been left hanging so long.
I can offer a couple of things to try, use the tramp protocol sshx instead of ssh, it seems to cope better with most non-vanilla ssh connections.
e.g.
/sshx:user#host:path/filename
The other thing to try is adding your ssh key passphrase to the session at startup, run an ssh-agent on the machine, and connect to it at startup, then run ssh-add to enter the passphrase once.
As a side note, upgrade your Emacs to 24.3 there's a lot of new/great stuff in there since 23.x