I'm trying to connect my Azure DevOps Organization to my Azure AD Tenant. I'm the only user in both. I connect to both using my personal microsoft (#outlook.com) account. However, when I'm trying to link my DevOps orga to my Azure AD Tenant, Azure DevOps doesn't see me as a member of the Azure AD Tenant that I'm trying to connect to, even though I'm connected in Azure with the same Microsoft account that I use on Azure DevOps... I'm following the steps mentioned here.
Below pic shows the error message I'm getting while trying to connect my Azure DevOps orga to my Default Azure AD Tenant :
Here, you can see that I'm connected in my Azure AD Tenant with the same Microsoft account that in the previous picture :
Tried to do the same where only one member who is the only admin is present in the azure AD tenant.But could successfully connect to azure devops.
Please make sure you are connecting already existed AAD tenant and then creating connection. check if admin permissions are given .
I had these roles assigned .
I had guest user access same as member access
Could smoothly connect without any warnings to the same domain as that of azure ad.
I tried to reproduce the issue and so tried connect with the other tenant /directory and got the error similar to yours which is not your case as you mentioned you have same directory domain.
So in your case , please close all other tabs and signin to only the required tenant both in azure ad and also in azure devops.
Please check the access permissions for this organization, if the organization is denied access for external access.
See Access via Azure AD FAQs | Microsoft Docs which can guide to troubleshoot your error cause and it says to have co-admin or service admin permissions.
Also please take the points by #jessehouwing in the comments into consideration , if issue is still there :Create a new Global Admin user account in AAD,Add this user to the DevOps organisation and set as owner and give Project Collection Administrators permission,Remove that domain from the DevOps org and Re-add to the org and re-assign as the owner.
Else it might be some issue with the default directory permissions. You may contact and report a problem in https://developercommunity.
Related
We've been told by Microsoft support that Azure DevOps Services supports tenant restrictions. While we have tenant restrictions enabled on a number of other services, it does't seem to apply to DevOps. Not only can we still log in to organizations outside of our tenant, we can also log in to our own organization and, if our corp email is added as a user in that org, the organization also shows up. I'd expect that our users would be blocked from logging into or accessing any external orgs.
I'm a little confused about why this isn't just working as expected and despite them saying Azure DevOps Services supports tenant restrictions, I'm not finding much documentation to back that up.
Have you been able to migrate to Azure DevOps Services and ensure that your users are only able to access orgs within your own tenant? How?
Azure DevOps Service supports the Azure Active Directory (Azure AD) tenant policy to restrict users from creating an organization in Azure DevOps. This policy is turned off, by default. You must be an Azure DevOps Administrator in Azure AD to manage this policy.
Check following link for more details:
https://learn.microsoft.com/en-us/azure/devops/organizations/accounts/azure-ad-tenant-policy-restrict-org-creation?view=azure-devops
Notice:
This policy is supported only for company owned (Azure Active
Directory) organizations. Users creating organization using their
personal account (MSA or GitHub) have no restrictions.
https://devblogs.microsoft.com/devops/policy-support-to-restrict-creating-new-azure-devops-organizations/
We finally received a more concrete answer to this question from Premier Support. Sounds like this wasn't entirely clear internally either. Azure DevOps Services supports TRv1 which provides tenant restrictions from client to proxy, but does not support TRv2 tenant restrictions which provides server to server restrictions. TRv1 will prevent you from authenticating against an org outside your tenant directly but does nothing to prevent the background authentication that happens if your account is configured to be able to access a secondary tenant's org. The server to server connection strips off the header information necessary to restrict you from accessing the secondary tenant. While this feature may be on their radar there is no expectation or firm timeline for it's release at this time.
So I am trying to build a Machine Learning pipeline on Azure DevOps. I followed this tutorial: https://www.azuredevopslabs.com/labs/vstsextend/aml/#author-praneet-singh-solanki
However, in Exercise 1- Step 3: Create or get workspace, I'm facing an error while authorising my Azure Subscription.
"Error: Insufficient privileges to complete the operation. Ensure that the user has permissions to create an Azure Active Directory Application."
Here is a snapshot of the problem. Also, my subscription is free tier as of now. Could that be a reason?
My subscription is free tier as of now. Could that be a reason?
No, you don't need worry about this. For free credit, we offered $200 free quota, and also the use will not be limited(just limit use depth only).
"Error: Insufficient privileges to complete the operation. Ensure that
the user has permissions to create an Azure Active Directory
Application."
This issue should caused by your incorrect role setting. Even you are owner of AAD or application, if you did not assign the role of Application administrator, you still will receive the error of permission not enough.
Please assign the role of your AD application to a Administrator permission. Go Azure Portal -> Azure Active directory-> Users, and then search your account which you will used in Azure Devops pipeline, and then follow the below setting to assign the role.
Then back to Azure Devops, refresh the Azure Subscription and Authorized again.
I am trying to connect an existing MS-based DevOps organisation to our AAD (O365). I have a user account nnn#outlook.com in DevOps that is both Organization Owner and a Collection Administrator.
The same outlook.com account is a Member of the target Tenant directory. I can login to portal.azure.com using that account and see all the details of the AAD. I have made the account a Global Administrator.
When I click Connect Directory, I get a list of the tenants that account has access to. My target is there and I have confirmed that the Tenant ID matches.
When trying to connect I get the error message:
"User: nnnn#outlook.com is not allowed to link organization: xxxx to AAD tenant: zzzzz. Only active members of the AAD tenant are allowed to perform the link."
I tried creating a clean guest account, PS'd it to become a Member, but get the same result.
Any suggestions greatly appreciated.
I was playing around to learn the feature and concept on Azure DevOps services.
And I created one Azure DevOps Organization using my MSA account and connected it to my Azure Active Directory (as I have a pay-as-you-go subscription using my MSA account).
I then disconnected it from Azure Active Directory so it (forced) logged me out of the Azure DevOps portal. I was thinking that I will disconnect and connect it back to AAD. But apparently that's not how it works... and I found out in a very rude way.
After that I was unable to login to the Azure DevOps service portal using my MSA ID. And here is the error page:
I was able to somehow get over the issue by creating a new org using the organization list link provided on the error page.
But now my question is, I do see my old DevOps Organization on Azure
DevOps Service portal which I am unable to access. Its sort of orphaned Org and just hanging there. Now how do I get rid of
it or delete it?
what is happening is that azure devops is not able to sync up with your AAD. The reason it is showing "not authorized error" is because it can't identify whether the same tenant is trying to connect(when you're logging in) to the project and the project is in the AAD parallely, so that is creating the miscommunication between your tenant, AAD and devops organisation.
Sign out, and then open your browser in a private session and sign in to your organization with your Azure AD, MSA or work credentials.
When trying to migrate from TFS to Azure Devops I run in an error during the import phase :
[Error] VS4032856: The identity Rémi Benoit belongs to a different Azure Active Directory (AAD) tenant than the identity used during the prepare step. Please sign in with an identity in the same AAD tenant or re-run the prepare step using this identity.
The user I used for the prepare step is registered on the AAD tenant. I can login to Azure portal with it and read user details on the AAD page of the portal.
A possible problem: my user was created on a different tenant. I was then invited as a guest to the tenant domain used in the import. I can list all the users on the AAD from the Azure portal. I also changed my default Azure directory to the tenant of the import.
Should I use an account created specifically on the AAD to execute the import ? Or Am I just missing some rights ?
Fixed my problem by using another account.
Switched from using a guest account to a member account on the AAD.