Is there a way when you use a snippet, and the placeholder tabstops come up, to remove the rest of the tabstops once you don't need any more? Basically, for functions or commands that you only need to specify a few parameters and not every param?
For example is this AHK command, I can tabstop to the first two palceholders but I don't need any others? I could use hotkey remove everything to the right but then it'll also remove the ")". So I'm just wondering if I'm missing a hotkey or feature to just remove rest of placeholders.
Related
I want to map two dot/period key presses to Tab key in AutoHotkey script. I tried to map similarly as its shown for remapping semicolon key - on AutoHotkey forums, but it doesn't work. I tried following:
1. `..`::Tab
2. ..::Tab
AutoHotkey gives an error
.
I tried searching on AutoHotkey Remap docs, but couldn't figure it out. The period key is the one with the greater than mark and not the number keypad period key. See this: Dot/period key
Addition info/context in response to reply by user 0x464e:
Basically, I am trying to expand Emmet style abbreviations in devtools style sub-panel since the chrome devtools team wont implement it.
I am not a fast typist, so it's a pain to type complete property names. For example, if I want to type margin-top, (see the image), Chrome autocomplete brings up margin, margin-block margin-block-end etc.
Now, for margin-top, you need to at least type margin-t to get the autocomplete to show that property.
This is the case for many very common CSS properties like margins, paddings, etc., so autocomplete isn't great.
On the other hand, if I just type mt and have Autohotkey expand to margin-top, it's much much faster, saves me much time and keeps me sane.
Basically, I have setup some hotstring in .ahk script and they work too.
However, if I press mt followed by a Tab key press, Chrome's autocomplete takes over and hotstring fails, (try once to see the problem). Instead, currently I press spacebar, or . (period) to trigger the hotstring. It works, but the problem is it leaves a space or a dot with the expanded text. [see this].
So, that's the actual reason I wanted a double period key trigger to replace Tab.
It would be great if the hotstring trigger would work with a double period key, but doesn't leave the trigger character itself and then have send Tab so as to jump to the value input of the just expanded property.
You're not really looking for a traditional remap, which is why you didn't find it from the documentation.
Remapping is just simply remapping one key to another, but you're not trying to do that. You're trying to make some action do another action.
Anyway, what you're asking is doable, but there's loads of different ways it can be achieved with difficulties varying from simple to extremely advanced & complicated.
You'll need to specify things more clearly before this can be answered properly.
Biggest questions that pop into my head right away are at least:
Should this work everywhere, or just in text input fields?
How should the original functionality of . be preserved, if at all.
(What should happen after the initial . keypress?)
Should there be some timeout between the keypresses?
Etc, this is just what I could think of right away, but surely there's more.
Anyway, for now I can give a simple implementation with a hotstring:
:*?:..::{Tab}
So this is a hotstring with the * and ? options.
I'm guessing these would probably be pretty good options for this.
So what this does, is it presses backspace twice and sends a Tab if you type ...
This should be fine for text editors, but it leaves much to be desired (the points I listed above aren't considered since I can't know what you're looking for. This is just what a default simple hotstring can offer).
Looks to me like you don't actually want the additional mapping of .. to Tab, but instead just want to update your existing hotstrings to activate immediately (without waiting for an EndChar) when the hotstring is followed by ..
Normally, you might look to the Ending Characters option to create this functionality, but since you want multiple characters to trigger this, we need to look to other options.
I will be using the example of ::mt::margin-top for my sample implementation. Extend any changes I make to these to the rest of your hotstrings in the script you screenshotted.
Here are the changes I am making to this example:
Add your .. to the end of each of your hotstrings triggers. For example ::mt::margin-top becomes ::mt..::margin-top. However, at this present, this still requires some sort of ending character to be pressed in order to proc. Let's fix that in the next step
Add the Asterisk Modifier to the hotstring. From the docs:
* (asterisk): An ending character (e.g. Space, ., or Enter) is not required to trigger the hotstring.
Final code for ::mt::margin-top example:
:*:mt..::margin-top
And extend this * insertion and .. appendation to each of your hotstrings.
Hope this helped! Lmk if you need any more help or changes.
Using the GUI: I assigned a macro to allow me to select the current line my cursor is on. I assigned it to 'ctrl+a', and reassigned 'select all' to 'ctrl+alt+a'. I now want, when I press 'ctrl+a' a second time, to have it highlight the remainder of the paragraph. Currently these commands are available via the following key-press:
Instruction:
1. Home->shift+end --highlights one line
2. Home->shift+end->shift+end -- highlights connected lines
So 1. is assigned to 'ctrl+a', but I'm stuck at this point. How do I assign ctrl+a when hit a second time to highlight the connected lines/paragraph? Details/specifics in layman's terms would be appreciated. Again, I've only been using the gui options, I'm not familiar with the more codey options. Note that it doesn't allow me to use
ctrl+a->shift+end.
I'm not overly familiar with macro and hotkey binding, so I'm unaware if this is a limitation or if there's a workaround, other than writing a program to fix it.
Not a coder, but from what I know of Lua I cameup with:
is_press=false
if btn(ctrl+a) and !is_press then btn(Home->shift+end) is_press=true end
if btn(ctrl+a) and is_press then btn(Home->shift+end->shift+end) is_press=false end
I could assign 2. to ctrl+shift+a, as a separate macro if all else fails.
Short answer, I don't think this is possible with a singe shortcut/macro.
Behind the scenes, Scintilla is doing the selecting. Once you've done the selection, going back to "home" the second time will reset the word wrap extension.
I'm using AutoHotkey. Is there a way of using "Send" without getting the previously wirtten Hotstring replaced?
So if I want to use the Hotkey System it always overrides the System with the text I set after "Send". But how can I achive that it is just appending my Send text to the hotstring?
Send, Hotstring Rest of Things You Want to Say
I think you may be mistaken in what you're trying to say or how you're using Send, as it doesn't replace previously written hotstrings. If you post an example of what you're saying, it will be easier to help. Also, what do you mean when you say "Hotkey System"?
Helpful info from the online documentation, Hotkeys & Hotstrings.
EDIT (per your comment below):
I understand what you're saying now. This is the default way that hotstrings work and has nothing to do with using the Send command. If you want to keep the activating text in a hotstring, you need to use the B0 option. Something like this:
:*B0:System::.out.println()
Note that the * makes it so you don't need to type a period after "system". If you want it to work that way instead, remove the asterisk.
Not sure where to search or how to define the keywords. What is the difference between the following?
#IfWinActive, Some Window Title
IfWinActive, Some Window Title
What is the # doing there? I know that in shortcuts, # stands for Windows key, but surely this has to mean something else.
I had been trying to make up a script and the If-else blocks did not work at all. Finally I figured out that it's because I added the # symbol. But I don't find any documentation regarding this kind of use of the # symbol.
The hash is a totally different command. If you search the index in the autohotkey documentation, you will find an entry for both IfWinActive and #IfWinActive.
[The hash...] Creates context-sensitive hotkeys and hotstrings. Such hotkeys perform
a different action (or none at all) depending on the type of window
that is active or exists.
The #IfWin directives are positional: they affect all hotkeys and
hotstrings physically beneath them in the script. They are also
mutually exclusive; that is, only the most recent one will be in effect.
The # only represents the windows key when you use it as a hotkey assignment designation. In AutoHotkey, any time you see a # at the beginning of a command it has something to do with AutoHotkey directives.
Conclusion:
If you just want regular if-else statemens and don't need to affect the context of hotkeys, then don't use the #.
total Emacs noob here. So right now I'm working on a fairly big LaTeX project in Emacs in which there are couple of places where I need to index some words, using the makeidx package. Because I also wanted indexed words to be bold, I created my own command \ind{} which would make the argument go bold and indexed. But right now I'm dissatisifed with this command so I'd like to change every instance of \ind{whatever} in my text by \textbf{whatever}\index{whatever by default}.
The thing is I know exactly what I want :
Go through the text, look for any instance of \ind{ and replace by \textbf{ using search-and-replace
Save the argument of \ind ("whatever" in this case) in memory
Ask me the user what should the argument of \index be. By default (by striking enter), it should be the first argument, but I can also change my mind and enter something different ("whatever by default" in this case). If there's no input (only a space " " for example) stop the program.
Write down \index{, the new argument and }.
Go to next occurance in the text.
But, alas!, I know not how to achieve this, so I need someone's help. If it should take too much time to explain how to do such a thing, would you please send me some tutorial about writing my own functions?
I hope I'm being clear, and thanks for your patience!
This approach seems vaguely unorthodox to me, but it works and seems sufficient for a one-off job...
In the replacement text for replace-regexp and query-replace-regexp (C-M-%), one newer escape sequence is \,(...), where ... can be any Lisp expression. There's a Lisp function read-from-minibuffer which reads arbitrary text typed by the user, with an optional default. Therefore:
C-M-%: Start query-replace-regexp.
\\ind{\([^}]+?\)}: The pattern to search for.
\\textbf{\1}\\index{\,(read-from-minibuffer "index content? " \1)}: The replacement text. The user will be prompted for the text to put in the braces following the \index{} element, using the original text between the braces following the \ind{} element as a default.
Note that when using query-replace-regexp, you'll have to confirm each choice by typing y after each. Use M-x replace-regexp if you want to avoid this step.
Vlad give you the LaTeX answer to your problem. An Emacs solution is the key-macro: start with
C-x (
to define a new macro, then do one step of your change, say:
C-s \ind{
<left>ex
Then copy and paste the argument in the \textbf macro... You have to be careful to move in a way that will be repeatable. Once the standard modification is done, you let the cursor after the whatever by default and end the definition by
C-x )
now C-x e will call the macro you just define, letting your cursor at the correct place to change the part you want to change You can also repeat the e to call the macro several time at once.
Why not just redefine the \ind so that it can get an optional argument?
For example:
\newcommand{\ind}[2][]{%
\def\first{#1}%
\ifx\first\empty
\textbf{#2}\index{#2}%
\else
\textbf{#2}\index{#1}%
\fi
}
This way you can use \ind{whatever} or \ind[whatever-else]{whatever}.