Good evening. Is it possible to combine multiple IQueryable into a single one without using Union in EF Core 2? The main problem is that it doesn't allow to use methods like .Union(), .Except() etc.
It's important that IQueryable should be executed as a single query.
This is what I want to get: toCreateSubquery.Union(toDeleteSubquery)
The queries I want to combine are listed below.
var toCreateSubquery =
validLinks
.Where(
rl => !existingLinks.Any(
el => el.Contract == rl.Contract && el.Estate == rl.Estate)) // Except() doesn't work'
.Select(x => new {x.Contract, x.Estate, Type = ActionType.Create});
var toDeleteSubquery =
existingLinks
.Where(el => !validLinks.Any(rl => el.Contract == rl.Contract && el.Estate == rl.Estate))
.Select(x => new {x.Contract, x.Estate, Type = ActionType.Delete});
This is the visualization of the problem I'm solving.
I want to get the union of these sets without intersection and be able to distinguish belonging to one of these sets.
Just in case, I attach the code of getting these sets:
var validLinks = from ac in _context.AreaContracts
from e in _context.Estate
where (from al in e.AreaLinks select al.Area.Id).Contains(ac.Area.Id) ||
e.Geometry.Intersects(
ac.Area.Geometry)
select new { Contract = ac.Contract.Id, Estate = e.Id };
var existingLinks = from sd in _context.SquareDistributions
select new { Contract = sd.Contract.Id, Estate = sd.Estate.Id };
Thank you for your attention.
I have very simple Linq query that shows error on run time
the query is
// string[] Blocks = _TableView.permission.BlockList.Split(',');
// string[] Permissions = _TableView.permission.PermissionsList.Split(',');
string[] Blocks = ... some string array ...;
string[] Permissions = ... some string array ... ;
var test = await (from t in _context.DocumentIn
where
Permissions.Contains(t.Imp_Exp.ToString()) &&
Permissions.Contains(t.confLevel.ToString()) &&
Blocks.Contains(t.BlockName)
select t).ToListAsync();
the error is
could not be translated. Either rewrite the query in a form that can be translated,
or switch to client evaluation explicitly by inserting a call to either AsEnumerable(),
AsAsyncEnumerable(), ToList(), or ToListAsync().
some notes
when I trace I find Blocks and Permissions full of values.
when I remove from the query two conditions of Permissions it works like the following
var test = await (from t in _context.DocumentIn
where
/*Permissions.Contains(t.Imp_Exp.ToString()) &&
Permissions.Contains(t.confLevel.ToString()) &&*/
Blocks.Contains(t.BlockName)
select t).ToListAsync();
In case Permissions is an array of string based on integers, an easy solution is to cast the array to int:
int[] Permissions = _TableView.permission
.PermissionsList
.Split(',')
.Select(s => int.Parse(s)).ToArray();
And remove the ToString call which are that are causing the exception:
var test = await (from t in _context.DocumentIn
where Permissions.Contains(t.Imp_Exp) &&
Permissions.Contains(t.confLevel) &&
Blocks.Contains(t.BlockName)
select t).ToListAsync();
But the main idea is that, removing the ToString call, whatever is your scenario, you should try to remove them from your query
Our current system is using Lazyloading by default (it is something I am going to be disabling but it can't be done right now)
For this basic query I want to return two tables, CustomerNote and Note.
This is my query
using (var newContext = new Entities(true))
{
newContext.Configuration.LazyLoadingEnabled = false;
var result = from customerNotes in newContext.CustomerNotes.Include(d=>d.Note)
join note in newContext.Notes
on customerNotes.NoteId equals note.Id
where customerNotes.CustomerId == customerId
select customerNotes;
return result.ToList();
}
My result however only contains the data in the CustomerNote table
The linked entities Customer and Note are both null, what am I doing wrong here?
I got it working with the following which is much simpler than what I've found elsewhere
Context.Configuration.LazyLoadingEnabled = false;
var result = Context.CustomerNotes.Where<CustomerNote>(d => d.CustomerId == customerId)
.Include(d=>d.Note)
.Include(d=>d.Note.User);
return result.ToList();
This returns my CustomerNote table, related Notes and related Users from the Notes.
That is callled eager loading you want to achieve.
var customerNotes = newContext.CustomerNotes.Include(t=> t.Node).ToList();
This should work, i don't really understand the keyword syntax.
If the code above doesn't work try this:
var customerNotes = newContext.CustomerNotes.Include(t=> t.Node).Select(t=> new {
Node = t.Node,
Item = t
}).ToList();
A newbie question. I am using EntityFramework 4.0. The backend database has a function that will return a subset of records based on time.
Example of working code is:
var query = from rx in context.GetRxByDate(tencounter,groupid)
select rx;
var result = context.CreateDetachedCopy(query.ToList());
return result;
I need to verify that a record does not exist in the database before inserting a new record. Before performing the "Any" filter, I would like to populate the context.Rxes with a subset of the larger backend database using the above "GetRxByDate()" function.
I do not know how to populate "Rxes" before performing any further filtering since Rxes is defined as
IQueryable<Rx> Rxes
and does not allow "Rxes =.. ". Here is what I have so far:
using (var context = new EnityFramework())
{
if (!context.Rxes.Any(c => c.Cform == rx.Cform ))
{
// Insert new record
Rx r = new Rx();
r.Trx = realtime;
context.Add(r);
context.SaveChanges();
}
}
I am fully prepared to kick myself since I am sure the answer is simple.
All help is appreciated. Thanks.
Edit:
If I do it this way, "Any" seems to return the opposite results of what is expected:
var g = context.GetRxByDate(tencounter, groupid).ToList();
if( g.Any(c => c.Cform == rx.Cform ) {....}
*Mongo Newbie here
I have a document containing several hundred numeric fields which I need to query in combination.
var collection = _myDB.GetCollection<MyDocument>("collection");
IMongoQuery mongoQuery; // = Query.GT("field", value1).LT(value2);
foreach (MyObject queryObj in Queries)
{
// I have several hundred fields such as Height, that are in queryObj
// how do I build a "boolean" query in C#
mongoQuery = Query.GTE("Height", Convert.ToInt16(queryObj.Height * lowerbound));
}
I have several hundred fields such as Height (e.g. Width, Area, Perimeter etc.), that are in queryObj how do I build a "boolean" query in C# that combines range queries for each field in conjunction.
I have tried to use the example Query.GT("field", value1).LT(value2);, however the compiler does not accept the LT(Value) construct. In any event I need to be able to build a complex boolean query by looping through each of the numeric field values.
Thanks for helping a newbie out.
EDIT 3:
Ok, it looks like you already have code in place to build the complicated query. In that case, you just needed to fix the compiler issue. Am assuming you want to do the following (x > 20 && x < 40) && (y > 30 && y < 50) ...
var collection = _myDB.GetCollection<MyDocument>("collection");
var queries = new List<IMongoQuery>();
foreach (MyObject queryObj in Queries)
{
//I have several hundred fields such as Height, that are in queryObj
//how do I build a "boolean" query in C#
var lowerBoundQuery = Query.GTE("Height", Convert.ToInt16(queryObj.Height * lowerbound));
var upperBoundQuery = Query.LTE("Height", Convert.ToInt16(queryObj.Height * upperbound));
var query = Query.And(lowerBoundQuery, upperBoundQuery);
queries.Add(query);
}
var finalQuery = Query.And(queries);
/*
if you want to instead do an OR,
var finalQuery = Query.Or(queries);
*/
Original Answer.
var list = _myDb.GetCollection<MyDoc>("CollectionName")
.AsQueryable<MyDoc>()
.Where(x =>
x.Height > 20 &&
x.Height < 40)
.ToList();
I have tried to use the example Query.GT("field", value1).LT(value2);,
however the compiler does not accept the LT(Value) construct.
You can query MongoDB using linq, if you are using the official C# driver. That ought to solve the compiler issue I think.
The more interesting question I have in mind is, how are you going to construct that complicated boolean query?
One option is to dynamically build an Expression and then pass that to the Where
My colleague is using the following code for something similar...
public static IQueryable<T> Where<T>(this IQueryable<T> query,
string column, object value, WhereOperation operation)
{
if (string.IsNullOrEmpty(column))
return query;
ParameterExpression parameter = Expression.Parameter(query.ElementType, "p");
MemberExpression memberAccess = null;
foreach (var property in column.Split('.'))
memberAccess = MemberExpression.Property
(memberAccess ?? (parameter as Expression), property);
//change param value type
//necessary to getting bool from string
ConstantExpression filter = Expression.Constant
(
Convert.ChangeType(value, memberAccess.Type)
);
//switch operation
Expression condition = null;
LambdaExpression lambda = null;
switch (operation)
{
//equal ==
case WhereOperation.Equal:
condition = Expression.Equal(memberAccess, filter);
lambda = Expression.Lambda(condition, parameter);
break;
//not equal !=
case WhereOperation.NotEqual:
condition = Expression.NotEqual(memberAccess, filter);
lambda = Expression.Lambda(condition, parameter);
break;
//string.Contains()
case WhereOperation.Contains:
condition = Expression.Call(memberAccess,
typeof(string).GetMethod("Contains"),
Expression.Constant(value));
lambda = Expression.Lambda(condition, parameter);
break;
}
MethodCallExpression result = Expression.Call(
typeof(Queryable), "Where",
new[] { query.ElementType },
query.Expression,
lambda);
return query.Provider.CreateQuery<T>(result);
}
public enum WhereOperation
{
Equal,
NotEqual,
Contains
}
Currently it only supports == && !=, but it shouldn't be that difficult to implement >= or <= ...
You could get some hints from the Expression class: http://msdn.microsoft.com/en-us/library/system.linq.expressions.expression.aspx
EDIT:
var props = ["Height", "Weight", "Age"];
var query = _myDb.GetCollection<MyDoc>("CName").AsQueryable<MyDoc>();
foreach (var prop in props)
{
query = query.Where(prop, GetLowerLimit(queryObj, prop), WhereOperation.Between, GetUpperLimit(queryObj, prop));
}
// the above query when iterated over, will result in a where clause that joins each individual `prop\condition` with an `AND`.
// The code above will not compile. The `Where` function I wrote doesnt accept 4 parameters. You will need to implement the logic for that yourself. Though it ought to be straight forward I think...
EDIT 2:
If you don't want to use linq, you can still use Mongo Query. You will just need to craft your queries using the Query.And() and Query.Or().
// I think this might be deprecated. Please refer the release notes for the C# driver version 1.5.0
Query.And(Query.GTE("Salary", new BsonDouble(20)), Query.LTE("Salary", new BsonDouble(40)), Query.GTE("Height", new BsonDouble(20)), Query.LTE("Height", new BsonDouble(40)))
// strongly typed version
new QueryBuilder<Employee>().And(Query<Employee>.GTE(x => x.Salary, 40), Query<Employee>.LTE(x => x.Salary, 60), Query<Employee>.GTE(x => x.HourlyRateToClients, 40), Query<Employee>.LTE(x => x.HourlyRateToClients, 60))