I don't know how to make a message appear when the owner joins the server I tried searching on everything but I can not find an answer or a script.
You can use this code to post a message into chat. Replace the text with the message you want to display, then use a RemoteEvent to make this run on all clients when the owner joins.
local StarterGui = game:GetService("StarterGui")
StarterGui:SetCore("ChatMakeSystemMessage", {
Text = "The owner has joined";
Color = Color3.fromRGB(255, 255, 255);
Font = Enum.Font.SourceSansBold;
TextSize = 18
})
Related
This is the code I am currently trying to use to implement an email based on the cell value of C2 (see screenshot of Google sheets below).
function amberwarning() {
// Fetch the combined flow value
var combflowrange = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("FloodEWS").getRange("C2");
var combflow = combflowrange.getValue();
// Check combined flow value
if (270 < combflow < 310){
// Fetch the email address
var emailRange = SpreadsheetApp.getActiveSpreadsheet().getSheetByName("Email").getRange("A2");
var emailAddress = emailRange.getValues();
// Send Alert Email.
var subject = 'Amber warning';
var message = 'It is possible that the Egger site will experience flooding in the coming hours. The advice is to be prepared to take action as combined river flows can increase very quickly during storms. Please keep up to date with the latest river levels for Hexham at <https://flood-warning-information.service.gov.uk/station/9006>. The latest flood warnings from the Environment Agency for Hexham are here <https://flood-warning-information.service.gov.uk/warnings?location=+hexham>. The latest MetOffice weather forecast can be found here <https://www.metoffice.gov.uk/weather/forecast/gcy2xzrne#?>. Please use all available information to inform your decision making. You will keep receiving an email as per each refresh of the latest data. The current combined flow from the North and South Tyne is' + combflow;
MailApp.sendEmail(emailAddress,subject,message);
}
}
The current error message I am receiving is "The parameters (number[],String,String) don't match the method signature for MailApp.sendEmail. (line 15, file"
The idea is that:
When cell C2 is between 270 and 310, to send an email 'Amber warning'
When cell C2 is above 310 send an email 'Red warning'
When cell C2 is less than 270, no email
This will hopefully be attached to a trigger to schedule every 15 mins
Any help on how to combine the two emails (or have single codes for each email) would be greatly appreciated.
enter image description here
It seems your "emailAddress" parameter is a number array (number[]) since the error you are receiving says so.
Try using getValue() if it is a single address, or get the first value of getValues() which is a 2D array by doing getValues()[0].
Whichever you choose, assign it to your emailAddress variable before calling MailApp.sendEmail().
Try to follow the steps in the documentation
as it explains everything clearly and how to send email through app-script
This question already has an answer here:
For loop and if statement for multiple conditions
(1 answer)
Closed 6 years ago.
I've got a Google Form set up to record user-reported errors about a database we maintain. The responses go into a Google Sheet and the users email is recorded. Essentially, I'd like to have a status field in that Google Sheet -- and when it's set to something like "Complete" (which would be in the same row as the response) I would like an email to be automatically sent to the user that submitted the response, letting them know the status of their response is complete. So sort of like a ticket system that many companies use (but we don't have a lot of bandwidth to set this up, so we're looking for something simple/free).
You cannot send an email inside the onEdit trigger. So you'll have to save the edits somewhere, maybe inside UserProperties, and have a time-based trigger that sends this value to your email every minute.
See: Email Notifications in Google Spreadsheets.
Google Spreadsheet support email notifications for row edits (tools - notification rules) but the last time I tried it, it never worked.
Create an onEdit() function, capture the cells value when it's edited, and run the code.
function onEdit(e){
// Capture the cells value after it is edited
var valCell = e.value;
Logger.log('The cell value is: ' + valCell);
if (valCell === "Complete") {
//Get the range of the cell
var theRange = e.range;
//Get the row of the range
var theRowOfEdit = theRange.getRow();
// Returns the cell with email
var ss = SpreadsheetApp.getActiveSpreadsheet();
var sheet = ss.getSheets()[0];
var cell = sheet.getRange("B" + theRowOfEdit.toString());
//Get the user email
var userEmail = cell.getValue();
//Send the email
}
}
This is not the complete code that you need. But, set this code up; test it, debug it, and if you have a specific question, post another question with the error message and line of code that isn't working.
Use debug in the code editor, and/or Logger.log() statements to debug the code.
i want to write an application to fetch call history from a black berry 10.
Can any body guide me which API i can use.
From the above link we can only display the default call log.
Would using the invocation framework work for what you are trying to do? It seems there is a way to fetch the call log.
https://developer.blackberry.com/cascades/documentation/device_platform/invocation/phone.html
This can be done using the CallHistoryService API available in OS 10.3.0
Here is some sample code to fetch all calls and output the numbers to the log:
CallHistoryService callHistoryService;
// The ID of a valid account is required
bb::pim::account::Account defaultAccount =
callHistoryService.defaultAccount();
// The default filter will return all calls
CallHistoryFilter defaultFilter;
// Contact search can be used to identify the contacts
CallHistoryParam callHistoryParams;
callHistoryParams.setContactSearchEnabled(false);
QList<CallEntryResult> callHistoryResults =
callHistoryService.callHistory(
defaultAccount.id(),
defaultFilter,
callHistoryParams);
foreach (const CallEntryResult &callEntryResult, callHistoryResults) {
CallEntry callEntry = callEntryResult.call();
qDebug << "Phone number: " << callEntry.phoneNumber();
}
I am trying to send an email with an excel attachment without using rsconn01. If this is possible could you show me how this is done?
I would also like a little bit more information about how rsconn01 works. I am using rsconn01 to send the emails but, I received a complaint that this program was also resending out emails that failed earlier that day.
This is the code I am using now. It works, but I want to know another way to do it without using rsconn01.
`CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
EXPORTING
document_data = w_doc_data
put_in_outbox = 'X'
commit_work = 'X'
IMPORTING
sent_to_all = w_sent_all
TABLES
packing_list = t_packing_list
contents_bin = t_attachment
contents_txt = it_message
receivers = t_receivers
EXCEPTIONS
too_many_receivers = 1
document_not_sent = 2
document_type_not_exist = 3
operation_no_authorization = 4
parameter_error = 5
x_error = 6
enqueue_error = 7
OTHERS = 8.
if sy-subrc = 0.
WAIT UP TO 2 SECONDS.
SUBMIT rsconn01 WITH mode = 'INT'
WITH output = 'X'
AND RETURN.
else.
WRITE:/ 'ERROR IN MAIL ', sy-subrc.
endif.`
You will have to use RSCONN01 unless you'd like to implement your own protocol handling. You're using the standard SAPconnect functionality (although with an API that's a bit outdated, I'd switch to the BCS if I were in your shoes). As long as you're using this, you're stuck with that report. However, you usually won't have to call it for yourself. It's a background process that is called every few minutes to process outgoing mail. Perhaps you're working in a development environment where the SAPconnect system isn't properly setup - in that case, you should talk to your system administrators. There are ways to tune the SAPconnect system to work in many cases. You should try to use the existing and well supported facilities before trying to circumvent them.
I am currently working on a MFC application which needs to retrieve data from a COM object running on another system. We already have this same data exchange mechanism working and fully supported when both systems are running Windows XP and the same manually set up user account (i.e. same username and password on both systems, no domain). The trouble is that I am trying to set it up such that I can access this same DCOM system from another computer which has the same user account set up, but is logged in under a corporate Domain user account.
Right now, it works if I manually run my application using Run As and specify the alternate user, but I am looking for a better solution. When I set up the COAUTHIDENTITY for the COSERVERINFO in CoCreateInstanceEx, I specify the username and password for the alternate account, and that doesn't seem to work. I've tried various things in the Domain entry - the computer name of the local computer, of the remote computer, and leaving it blank - but none seem to help.
I tried editing the DCOM permissions for the object on the server computer to allow full access to the Everyone account, but that doesn't seem to help, and I haven't been able to find any meaningful error messages about what's really wrong. It would probably help if I could get some kind of log message on the server computer to see exactly what credentials are coming across when I run it using Run As. Does anybody have any ideas? Or maybe know what the system uses for Domain when you make a DCOM connection from a non-Domain account (a few things imply that the computer name is used, but that doesn't work when I try it).
Code follows:
COAUTHINFO AuthInfo;
COAUTHIDENTITY AuthIdentity;
COSERVERINFO ServerInfo;
MULTI_QI Results;
AuthIdentity.Domain = (unsigned short *) w_domain;
AuthIdentity.DomainLength = wcslen( w_domain);
AuthIdentity.Flags = SEC_WINNT_AUTH_IDENTITY_UNICODE;
AuthIdentity.Password = (unsigned short *) w_password;
AuthIdentity.PasswordLength = wcslen(w_password);
AuthIdentity.User = (unsigned short *) w_username;
AuthIdentity.UserLength = wcslen(w_username);
AuthInfo.dwAuthnLevel = RPC_C_AUTHN_LEVEL_CALL;
AuthInfo.dwAuthnSvc = RPC_C_AUTHN_WINNT;
AuthInfo.dwAuthzSvc = RPC_C_AUTHZ_NONE;
AuthInfo.dwCapabilities = EOAC_NONE;
AuthInfo.dwImpersonationLevel = RPC_C_IMP_LEVEL_IMPERSONATE;
AuthInfo.pAuthIdentityData = &AuthIdentity;
AuthInfo.pwszServerPrincName = NULL;
ServerInfo.dwReserved1 = 0;
ServerInfo.dwReserved2 = 0;
ServerInfo.pAuthInfo = &AuthInfo;
ServerInfo.pwszName = w_nodename;
Results.pIID = &_uuidof(_DS_SessionContext);
Results.pItf = NULL;
Results.hr = 0;
hr = CoCreateInstanceEx(clsid, NULL, CLSCTX_ALL, &ServerInfo, (ULONG) 1, &Results);
if(FAILED(hr))
{
m_Error.Format("(0x%x) CoCreateInstanceEx for _DS_DataFrame failed.",hr);
m_Error2.Format("Make sure computer IP address is correct and connected.");
CoUninitialize();
UpdateData(false);
UpdateWindow();
return false;
}
pSession = (_DS_SessionContext *)Results.pItf;
hr = pSession->raw_DS_GetVersion(&DSStatus, &version);
if(FAILED(hr))
{
m_Error.Format("(0x%x)GetVersion",hr);
CoUninitialize();
UpdateData(false);
UpdateWindow();
return false;
}
Ah, I figured it out. Turns out that in DCOM, creating the instance and calling functions on it do not automatically use the same security blanket. The authentication info in the COSERVERINFO passed to CoCreateInstanceEx only applies towards creating the instance, and when I call functions on that instance later, then it fails because I am calling those functions using the credentials of the application.
To do it properly, before calling functions on the instance, I must first call (error handling omitted for clarity):
hr = CoSetProxyBlanket(Results.pItf, RPC_C_AUTHN_WINNT, RPC_C_AUTHZ_NONE, NULL, RPC_C_AUTHN_LEVEL_CALL,
RPC_C_IMP_LEVEL_IMPERSONATE, &AuthIdentity, EOAC_NONE);
This sets the security blanket used to call the instance to the same one that was used to create it, and thus everything works.