I'm trying to download some files using wget but the problem is the files will only download from specific servers how can I use wget over VPN?
p s: I tried use_proxy=yes -e http_proxy=[server]:[port] but it didn't work I need to connect to a VPN server not a proxy
Install a VPN on your machine first, then run the command
Proxies and VPNs are entirely different things. The proxy functionality won't be of any use to you here.
To use a VPN you have to setup a connection at the OS level (i assume linux ? but i could be wrong) - the wget tool itself wont be involved, you'll just run that after your connection is replaced with the VPN connection (no need for any special flags).
As for how you setup the vpn connection, that differs a lot based on the particular details of your situation. It could involve running openvpn yourinfo.ovpn or something like that, or your vpn provider may offer a separate application to set up the tunnel connection and then adjust your OS's routing table so traffic flows through the tunnel instead of to the normal gateway.
Related
So this is a classic question that I’ve seen many times before...
I’m trying to connect to my home network when not at home using a raspberry pi.
I’m well aware that the way to go with this is to use a vpn server such as OpenVPN.
However, in order to connect to the vpn I would need to forward a port on my router... which I can’t do.
I’ve found remote.it which allows remote connection to a computer (pi) without port forwarding.
What I would like to know is how would I set about using the 2 together, I.e. connecting to remote.it which in turn connects me to my vpn server?
I'm sorry to be finding this question just now, but in case it's still useful to you or to anyone else, here's what you need to do:
Install remote.it
Set-up a remote.it connection to use the protocol (TCP/UDP) and port required by the VPN application
Make a remote.it connection/adding the service to your network (remoteit - Desktop application UI terminology)
Use this connection info (URL/port or localhost:port) with the VPN client
Send an e-mail to support#remote.it if you need help
I would recommend ZeroTier(https://www.zerotier.com/). It haves its own linux client , and you can connect to as many networks as you would like.
You can also configure IP address from the website.
There is also an Android an IOS app that is really simple to connect.
I'm a new comer to using the overseas server. Recently I bought a vps from virmach in order to see foreign websites like google and wiki.
I've been trying for a long time configuring my shadowsocks on my server.
However, when I was using shadowsocks-qt5 to connect my server, it was timeout.
And of course I can't access google correctly.
What I want to ask is the reason why I failed.
Here are things that I do remember to do:
stop the firewall on both computers;
build the .json file which I referred to blogs in China.
Here are the outline of my shadowsocks.json on my server:
{
"server":"0.0.0.0",
"server_port":8388,
"local_address":"127.0.0.1",
"local_port":1080,
"password":"XXXX",
"timeout":600,
"method":"aes-256-cfb"
}
Other useful(maybe) information:
my client OS version: Ubuntu 18.04.3 LTS
my server OS version: Ubuntu 16.04.6 LTS
the client I choose is from: https://github.com/shadowsocks/shadowsocks-qt5
I could not help but wandered, are there any other possible reasons I've forgot? Can anyone inform me some helpful details to solve this puzzling problems? Thanks a lot!
I have not set up my own VPS but I have instead subscribed to the server provided by caonima.io, so I can't speak for any server related issues. Additionally, I have no affiliation with caonima.io. I did however successfully set up my client on Ubuntu 16.04 after having some issues connecting to GFW-blocked (China's Great FireWall) websites.
From what I understand from my solution, the client configuration is NOT the only step of setup. There are two layers of proxy access that need to be completed:
Client Configuration. Configure your client with the server and connection information. A successful connection looked like this for me with my command line interface
shadowsocks-libev command line client successful connection
System or Browser Proxy Configuration. You will need to configure either your browser or web access tool to use a proxy, or set system-wide proxy settings. To set system wide proxy settings, go to system settings > network > network proxy and enter the proxy information. Setting Socks host to localhost:1080 resulted in successful GFW-blocked website access (as shown below)!
Ubuntu network settings proxy manual configuration
I am using jmeter to test an application which uses PostgreSQL. I can connect to the database by using ssh tunnel provided by the database applications.
Can someone please tell me how do I do this using jmeter. I do not see any ssh tunnel option in jmeter database connection confi element.
You could use port forwarding,as explained in this answer:
https://stackoverflow.com/a/1968446/460802
I don't think you should be load testing the database directly, your load test should simulate real-life application under test usage. So instead of testing the database you should focus on the application itself and treat it like a black box so my general recommendation is reconsidering the approach.
If you have performed normal load testing already and identified that the database is the bottleneck and would like to load test the database separately - performance testing it over the SSH tunnel is not the best idea itself as the SSH tunnel traffic might be the next bottleneck due to the nature of TCP protocol and immense CPU footprint required for encryption/decryption of the data sent over SSH. So I would recommend talking to network administrators and asking them to temporarily open the Postgres network port to the machine(s) you're running JMeter from or provide you access to the machine(s) where you can install JMeter which will be having access to the database directly (preferably in the same subnet / physical location, otherwise you might be suffering from high latencies)
If for any reason the above instructions are not applicable for you - you can use SSH Local Forwarding in order to map remote Postgres port to your local port, the relevant command would be:
ssh -L 2345:localhost:5432 username#your_postgresql_server
Once done you should be able to connect to Postgres instance as it is installed locally on port 2345 like:
postgres://localhost:2345/your_database
I'm using Eclipse on many different PC's also on nonPrivat PC's like in the university, I would like to run Eclipse on an Ubuntu Server (I already got one running at home) and access it remotely from another operating system (Windows/Mac/Linux).
I know there are ways like Xrdp, but I don't really want to install a GUI on the Ubuntu Server to do that. (If it's at all possible to access it over the internet)
Are there other ways to deal with that problem? Maybe something quite different than that?
Thanks in advance!
Two solutions.
You can use ssh -X user#your.server. This will create a tunnel for the X protocol, allowing you to run Eclipse with display on your machine, i.e. just
mymachine $ ssh -X me#that.server
thatserver# eclipse
and you will see the GUI on the local machine, provided you have an X server, which should be standard and is easy to find for a Mac (it is called Quartz).
If you are not willing, or not able, to install X on your machine, you could also install tightvnc on the remote machine and a VNC client on your computer. VNC is a different remoting protocol, and can be better than X in some cases, because it has a reputation for fewer round trips in its communication, giving less latency problem.
If you have a database to reach for your project, that can be seen only from the remote machine, maybe inside a DMZ, you might still reach it, creating an SSH tunnel, like this
ssh -X -L <database port>:<database server address>:<port number here> me#that.server
This way you will be able to access the database with which you talk on port database port at address database server address, as seen from the remote server that.server. The port will be forwarded to localhost:por number here.
Do you need to have graphic access to eclipse or do you just need to be able to build projects? If you just want to build projects there is a headless CDT which let's you do that from the command line.
I am developing an iPhone application which is communicating with a remote service over a tcp socket connection (the service actually listens on telnet and takes telnet commands too). The connection is of course insecure and all requests (with quite a bit of sensitive data, such as passwords) and responses are transmitted as plain text. My first reaction was to consider a web service with ssl, but developing a web service from scratch seems too lengthy.
Because of that I have been thinking of using an ssh tunnel in order to secure the traffic. Is it possible to set up an ssh tunnel in an iPhone application (with libssh2 for example) and then use that tunnel to securely connect to the remote service? If so, how should I set up the tunnel and most importantly, how should I connect to the remote service and give commands/receive responses? Lastly, what should I keep in mind regarding the tunnel?
EDIT: I forgot to mention that the server running the service is using Windows. SSH is achieved via Cygwin.
I am sorry if the question is too basic but this is really my first real brush with ssh.
I think you may have more security issues by using an ssh tunnel because there isn't a secure way to tie down the authentication information in the app and well, if someone can get that login information they could conceivably connect to your ssh session and start trying to issue arbitrary commands. Of course there are ways to lock down an ssh session, but still, I'd be very wary of that. At least with a web service, it acts as a "broker" between the iPhone app and the telnet session so you can add an extra layer of protection.