I need to be able to run the command latexindent but I get this error every time:
Unknown PerlIO layer 'encoding' at /usr/local/texlive/2021/texmf-dist/scripts/latexindent/LatexIndent/Document.pm line 21.
Unknown PerlIO layer "encoding" at /opt/homebrew/Cellar/perl/5.34.0/lib/perl5/5.34.0/open.pm line 126.
Unknown PerlIO layer "encoding" at /opt/homebrew/Cellar/perl/5.34.0/lib/perl5/5.34.0/open.pm line 134.
Unknown PerlIO layer "encoding" at /opt/homebrew/Cellar/perl/5.34.0/lib/perl5/5.34.0/open.pm line 135.
Attempt to reload PerlIO/encoding.pm aborted.
Compilation failed in require at /usr/local/texlive/2021/texmf-dist/scripts/latexindent/LatexIndent/FileExtension.pm line 20.
BEGIN failed--compilation aborted at /usr/local/texlive/2021/texmf-dist/scripts/latexindent/LatexIndent/FileExtension.pm line 20.
Compilation failed in require at /usr/local/texlive/2021/texmf-dist/scripts/latexindent/LatexIndent/Document.pm line 29.
BEGIN failed--compilation aborted at /usr/local/texlive/2021/texmf-dist/scripts/latexindent/LatexIndent/Document.pm line 29.
Compilation failed in require at /usr/local/texlive/2021/bin/universal-darwin/latexindent line 27.
BEGIN failed--compilation aborted at /usr/local/texlive/2021/bin/universal-darwin/latexindent line 27.
I installed MacTeX with Homebrew through this command brew install --cask mactex. When I type the command which latexindent it gives this /usr/local/texlive/2021/bin/universal-darwin/latexindent. I have Perl v5.34.0 and it is here /opt/homebrew/bin/perl.
How do I set the encoding for PerlIO?
I solved by installing latexindent via homebrew.
The command is brew install latexindent.
I'm on MacOS Monterey 12.4
Based on this question, I found a solution to my problem like this :
I deleted : ~/perl5, ~/.cpan, ~/.cpanm;
I restarted my computer;
Then I installed Log::Log4perl with the command cpan install Log::Log4perl. There it asked me if I wanted to choose automatic or
manual configuration mode. I chose the automatic mode;
Then I installed other modules based on this
post:
SQL::Statement, Text::CSV_XS,DBD::CSV, Log::Dispatch::File, cpan install YAML::Tiny, File::HomeDir, Unicode::GCString, Mac::SystemDirectory;
And finally the command latexindent --version gives me the version 3.9.1, 2021-03-21 and it works.
Related
While executing makeinfo on cygwin I am getting the following errors. I am using the perl version 5.32.1
23:16 Harshal:~> makeinfo
Can't locate if.pm in #INC (you may need to install the if module) (#INC contains: /usr/lib/texinfo /usr/share/texinfo/lib/Text-Unidecode/lib /usr/share/texinfo/lib/Unicode-EastAsianWidth/lib /usr/share/texinfo/lib/libintl-perl/lib /usr/share/texinfo /usr/share/texinfo /usr/local/lib/perl5/site_perl/5.32/x86_64-cygwin-threads /usr/local/share/perl5/site_perl/5.32 /usr/lib/perl5/vendor_perl/5.32/x86_64-cygwin-threads /usr/share/perl5/vendor_perl/5.32 /usr/lib/perl5/5.32/x86_64-cygwin-threads /usr/share/perl5/5.32) at /usr/share/texinfo/Texinfo/Structuring.pm line 27.
BEGIN failed--compilation aborted at /usr/share/texinfo/Texinfo/Structuring.pm line 27.
Compilation failed in require at /usr/share/texinfo/Texinfo/Convert/Converter.pm line 32.
BEGIN failed--compilation aborted at /usr/share/texinfo/Texinfo/Convert/Converter.pm line 32.
Compilation failed in require at /usr/bin/makeinfo line 99.
BEGIN failed--compilation aborted at /usr/bin/makeinfo line 99.
If someone can provide some pointer on how to resolve this issue would be helpful
I tried updating the perl version. I tried commetting out the code on line num 27 in structuring.pm didn;t workout. I am not from software background but i need the above thing for some RISCV based toolchain update.
Any help woudl be really appreciated .
Something's wrong with your system. This is a file included in the perl-5.32.1-2 package. It should be found at
/usr/share/perl5/5.32/if.pm
Try reinstalling the perl package. If the file isn't missing, something's wrong with the permissions.
My computer crashed during a perl module installation using cpanm (I guess while installing Carp as a dependency of Moose). Now, when I try to use the modules I want to use, I get the following error:
user#linux:~$ ./script_using_moose.pl
Carp.pm did not return a true value at /usr/share/perl/5.14/diagnostics.pm line 185.
BEGIN failed--compilation aborted at /usr/share/perl/5.14/diagnostics.pm line 185.
Compilation failed in require at ./script_using_moose.pl line 5.
BEGIN failed--compilation aborted at ./script_using_moose.pl line 5.
user#linux:~$
And if I try to (re)install the package (using cpanm --reinstall or cpanm force) I get this other (similar) error:
user#linux:~$ sudo cpanm --force Moose
Carp.pm did not return a true value at /usr/local/share/perl/5.14.2/Parse/CPAN/Meta.pm line 6.
BEGIN failed--compilation aborted at /usr/local/share/perl/5.14.2/Parse/CPAN/Meta.pm line 6.
Compilation failed in require at /loader/0x1692090/App/cpanminus/script.pm line 11.
BEGIN failed--compilation aborted at /loader/0x1692090/App/cpanminus/script.pm line 11.
Compilation failed in require at /usr/bin/cpanm line 2029.
BEGIN failed--compilation aborted at /usr/bin/cpanm line 2029.
user#linux:~$
How can I resume installation or reconfigure/reinstall the incomplete module?
For some reason, a couple of files were created but not written to, or truncated. These can be easily identified in the full installation log as those modules with an undef version number:
Checking dependencies from MYMETA.json ...
...
Checking if you have Task::Weaken 0 ... Yes (undef)
...
Checking if you have Devel::GlobalDestruction 0 ... Yes (undef)
Reinstalling the modules Task::Weaken, and Devel::GlobalDestruction should do the trick.
PROBLEM: In the process of trying to install gitstat on a Windows7 machine I broke my xampp Apache installation. Now I can't get gitstat or apache to work.
APACHE ERROR:
[error] Can't load Perl file: C:/xampp/apache/conf/extra/startup.pl for server localhost:80, exiting...`
Other people have reported this issue being caused by the PERL5LIB environment variable, but that variable does not exist on my machine.
WHAT I DID / GITSTAT ERROR:
I needed the SOAP::Lite module installed so I followed the windows guide here: http://soaplite.com/install.html
As far as I could tell I installed the module successfully, console output below
cpan[1]> install SOAP::Lite
CPAN: Storable loaded ok (v2.21)
Going to read '\xampp\perl\bin\.cpan\Metadata'
Database was generated on Wed, 27 Jun 2012 02:47:03 GMT
SOAP::Lite is up to date (0.714).
I saw a SOAP directory in perl/site/lib which (to me) means that the module should be available. When I look in my perllocal.pod file SOAP:Lite is in there.
Part of the gitstat installation instructions say to copy the Lite.pm file from perl/site/lib/SOAP into gitstat\gstat_pl\lib
However, when I try to perform step nine of gitstat installation (perl gitstat.pl HEAD) I get the following:
C:\xampp\htdocs\gitstat\gstat_pl>perl gitstat.pl HEAD
Supported versions:
BEGIN failed--compilation aborted at C:/xampp/perl/site/lib/SOAP/Lite.pm line 34
86.
Compilation failed in require at C:/xampp/perl/site/lib/SOAP/Constants.pm line 1
3.
BEGIN failed--compilation aborted at C:/xampp/perl/site/lib/SOAP/Constants.pm li
ne 13.
Compilation failed in require at lib/Lite.pm line 3444.
BEGIN failed--compilation aborted at lib/Lite.pm line 3444.
Compilation failed in require at gitstat.pl line 30.
If I don't copy the file from perl/site/lib/SOAP then I get
C:\xampp\htdocs\gitstat\gstat_pl>perl gitstat.pl HEAD
Can't locate lib/Lite.pm in #INC (#INC contains: C:/xampp/perl/lib C:/xampp/perl
/site/lib .) at gitstat.pl line 30.
I don't understand why CPAN didn't install the Lite.pm module in the #INC path or why the compilation might fail when the module is available, or most importantly why my Apache install is broken. Also I'm very new to Perl and CPAN and my understanding of Apache is primitive so simpler explanations would be greatly appreciated.
I've run into a problem when using XML::Parser under our modperl setup in production (on AIX 5.3). It works fine in development but fails on production with the following error:
[Tue Apr 03 08:44:03 2012] [error] Can't load '/wload/es1p/app/perl/lib/site_perl/5.10.1/aix/auto/XML/Parser/Expat/Expat.so' for mo
ule XML::Parser::Expat: Could not load module /wload/es1p/app/perl/lib/site_perl/5.10.1/aix/auto/XML/Parser/Expat/Expat.so.\n\tDepe
dent module /wload/es1p/app/usr/local/apache2/lib/libexpat.a(libexpat.so.1) could not be loaded.\n\tMember libexpat.so.1 is not fou
d in archive \nCould not load module /wload/es1p/app/perl/lib/site_perl/5.10.1/aix/auto/XML/Parser/Expat/Expat.so.\n\tDependent mod
le /wload/es1p/app/perl/lib/site_perl/5.10.1/aix/auto/XML/Parser/Expat/Expat.so could not be loaded. at /wload/es1p/app/perl/lib/5.
0.1/aix/DynaLoader.pm line 200.\n at /wload/es1p/app/perl/lib/site_perl/5.10.1/aix/XML/Parser.pm line 18\nCompilation failed in req
ire at /wload/es1p/app/perl/lib/site_perl/5.10.1/aix/XML/Parser.pm line 18.\nBEGIN failed--compilation aborted at /wload/es1p/app/p
rl/lib/site_perl/5.10.1/aix/XML/Parser.pm line 22.\nCompilation failed in require at /wload/es1p/app/perl/lib/site_perl/5.10.1/XML/
Path/XMLParser.pm line 7.\nBEGIN failed--compilation aborted at /wload/es1p/app/perl/lib/site_perl/5.10.1/XML/XPath/XMLParser.pm li
e 7.\nCompilation failed in require at /wload/es1p/app/perl/lib/site_perl/5.10.1/XML/XPath.pm line 13.\nBEGIN failed--compilation a
orted at /wload/es1p/app/perl/lib/site_perl/5.10.1/XML/XPath.pm line 13.\nCompilation failed in require at /wload/es1p/app/perl/lib
site_perl/5.10.1/Net/SAML2/IdP.pm line 23.\nBEGIN failed--compilation aborted at /wload/es1p/app/perl/lib/site_perl/5.10.1/Net/SAML
/IdP.pm line 23.\nCompilation failed in require at /wload/es1p/app/perl/lib/site_perl/5.10.1/Net/SAML2.pm line 69.\nBEGIN failed--c
mpilation aborted at /wload/es1p/app/perl/lib/site_perl/5.10.1/Net/SAML2.pm line 69.\nCompilation failed in require at /wload/es1p/
pp/usr/local/apache2/perl-bin/sso.pl line 4.\nBEGIN failed--compilation aborted at /wload/es1p/app/usr/local/apache2/perl-bin/sso.pl
The expat/expat-devel libraries were installed into /opt/freeware/lib using a package (the same one on dev and live) and both show the same output from ldd Expat.so:
Expat.so needs:
/usr/lib/libc.a(shr.o)
/opt/freeware/lib/libexpat.a(libexpat.so.1)
/unix
/usr/lib/libcrypt.a(shr.o)
I've tried setting up LIBPATH both in our dotfiles and in our mod_env configuration but with no luck. I'm not expecting someone to know the exact answer but I've run out of ideas as to what I can try so I'm hoping for some suggestions to try out.
EDIT: I should also point out that the same script using XML::Parser works perfectly as a normal cgi-bin script on our live server.
One thought: Maybe there are two different XML::Parser installed on your prod server. Your CGI pick one and your script pick the another?
Print out the #INC from script (on prod and dev) and from your working CGI and compare the result.
regards,
When I run the following to create an executable out of my Perl script:
pp -o process_target_mode_data Process_Target_Mode_Data.pl
I get the following error output:
Perl lib version (5.12.2) doesn't match executable version (v5.12.0) at /home/Neil/ActivePerl-5.12/lib/Config.pm line 50.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/Errno.pm line 8.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/Errno.pm line 8.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/File/Temp.pm line 148.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/File/Temp.pm line 148.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/Archive/Zip.pm line 14.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/Archive/Zip.pm line 14.
Compilation failed in require at -e line 459.
/home/Neil/ActivePerl-5.12/site/bin/pp: Failed to extract a parl from 'PAR::StrippedPARL::Static' to file 'parleNrP2Xi' at /home/Neil/ActivePerl-5.12/site/lib/PAR/Packer.pm line 1172, <DATA> line 1.
Could someone explain to me what is going on and how I can resolve this problem?
Info brian d foy requested:
[bash-3.2][Neil#willy]$ which pp
/home/Neil/ActivePerl-5.12/site/bin/pp
[bash-3.2][Neil#willy]$ /home/Neil/ActivePerl-5.12/site/bin/pp -o process_target_mode_data Process_Target_Mode_Data.pl
Perl lib version (5.12.2) doesn't match executable version (v5.12.0) at /home/Neil/ActivePerl-5.12/lib/Config.pm line 50.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/Errno.pm line 8.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/Errno.pm line 8.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/File/Temp.pm line 148.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/File/Temp.pm line 148.
Compilation failed in require at /home/Neil/ActivePerl-5.12/lib/Archive/Zip.pm line 14.
BEGIN failed--compilation aborted at /home/Neil/ActivePerl-5.12/lib/Archive/Zip.pm line 14.
Compilation failed in require at -e line 459.
/home/Neil/ActivePerl-5.12/site/bin/pp: Failed to extract a parl from 'PAR::StrippedPARL::Static' to file 'parludZfldz' at /home/Neil/ActivePerl-5.12/site/lib/PAR/Packer.pm line 1172, line 1.
[bash-3.2][Neil#willy]$
[bash-3.2][Neil#willy]$ /home/Neil/ActivePerl-5.12/bin/cpan -l | grep PAR
PAR 1.002
PAR::Dist 0.47
PAR::Heavy 0.12
PAR::Filter 0.03
PAR::SetupTemp 1.002
PAR::SetupProgname 1.002
PAR::Packer 1.006
PAR::StrippedPARL::Dynamic 0.958
PAR::StrippedPARL::Static 0.958
PAR::StrippedPARL::Base 0.975
PAR::Filter::Bytecode undef
PAR::Filter::Bleach undef
PAR::Filter::Obfuscate undef
PAR::Filter::PatchContent undef
PAR::Filter::PodStrip undef
App::Packer::PAR 0.91
Perl lib version (5.12.2) doesn't match executable version (v5.12.0)
Some parts of your Perl installation are at a different version than others. More specifically, if you look at /home/Neil/ActivePerl-5.12/lib/Config.pm line 50, you will see that there is an explicit comparison of the version of Perl being executed (which is 5.12.0) to the version of the Config.pm library being used (5.12.2).
If you perform a new installation of ActivePerl 5.12.2 (to bring all components up to the same version), this error should go away.
I had same issue. I installed PAR::Packer from Activestate Perl Package Manager (PPM). As mentioned above in one of the replies, there is version mismatch between the perl and pp binaries. Here's how I fixed it:
Uninstall PAR-Packer from PPM.
Open DOS command line.
Run cpan install PAR::Packer
This will download, compile, and install the package from CPAN. MinGW compiler toolchain will be downloaded as well, if needed. The whole process may take a while on slower cpus.
Find the location of that pp, then figure out its version. I bet it's left over from an earlier installation. Ensure that you have PAR for your new version of Perl.
You can also try specifying the location of the particular pp you want to use so you know exactly what one you are using:
$ /full/path/to/5.12.2/pp ...
Go to the perl/lib/Config.pm and changed the condition in the lines:
die "$0: Perl lib version (5.32.0) doesn't match executable '$^X' version ($])" unless $^V;
to
die "$1: Perl lib version (5.32.1) doesn't match executable '$^X' version ($])" unless $^V;
and the next line
$^V eq 5.32.0 or die sprintf "%s: Perl lib version (5.32.0) doesn't match executable '$^X' version (%vd)", $0, $^V;
to
$^V eq 5.32.1 or die sprintf "%s: Perl lib version (5.32.1) doesn't match executable '$^X' version (%vd)", $0, $^V;
this worked for me, at least it won't complain... yes, i know, PERL and Python are f***d up.