I'm doing a school project where I have to make a simulation of a restaurant. I'm using anylogic ver 8.7.6.
I have a resource pool in Main, and I want to have a checkbox in parameters variation that would change the capacity of the resource pool in Main. The code in parameters variaton in the before simulation run section is
if (checkZamestnankyna.isSelected()){ root.pracovnicky.set_capacity(1); }
(checkZamestnankyna is the checkbox and pracovnicky is the resource pool). The problem is that I collect some statistics (one of them is for instance this one: statsAvgDlzkaRadu.add(root.statsDlzkaRadu.mean()); ) in the after simultion run section and I'm getting a nullpointer exception. All works just fine when the checkbox is not checked. I don't really see how those two things are related or why am I getting the exception.
Thanks.
Related
I have linked many parameters in my model to values in the internal ModelDatabase. This works great.
Now I want to allow the user to import a new "Input File" for a specific scenario. I have added a fileChooser element on the Simulation Experiment screen and in the onUpload action I use the ModelDatabase.importFromExternalDB to upload the relevant sheet to the relevant table.
However, this does not seem to work. Initially I thought that the update simply did not happen but when I stop the model in the AnyLogic IDE and start it again in the IDE, the new values are used.
It appears as if the update only happens on startup/close and that the database is "static" while running. I did set the auto-commit parameter to true on the importFromExternalDB function, but this made no difference.
Is there a function I can call to force a "refresh" of the internal database?
You probably load the data at runtime using the default code such as selectFrom("some String with query")
However, these always load from the cached dbase to speed things up.
Instead, you must force AnyLogic to load from the live dbase using an additional argument. In this example, it would be selectFrom(false, "some String query")
This is also documented in the help:
So go through all queries in your model and add the appropriate boolean arg to force-load from the non-cached dbase.
I am trying to put a conditional breakpoint in java.util.concurrent.ThreadPoolExecutor class (say in getTask()) method. I tried multiple conditions, but in all conditions, this as well as other threads keep popping the following error:
"Unable to compile conditional breakpoint - missing java project context".
enter image description here
Could this be happening because ThreadPoolExecutor could have been compiled without debug information?
In any case, are there any other way in which i can break in this class (particularly getTask() method)? Its important for me in order to debug multi threaded application.
I have an airlock (small room called AL_2216) between 2 areas. The airlock has many different agent types passing through it (cart, product, operator, etc). There are queuing areas on either side of the airlock.
Because the space is small, I built a short flowchart that has a queue and restricted area blocks that all agents must pass through when going through this space. If the restricted area's capacity is full, the agents wait in either the InsideQueueArea or OutsideQueueArea depending on the direction they're going.
I send agents via Exit and Enter blocks to this flowchart and it works great on the top portion of the flowchart.
BUT if I try to use an Enter or Exit block in the prepare flowchart, I get this error:
I tried using a custom block instead of Enter and Exit blocks, but that creates a new instance of the code each time and the restrictions don't work together across the multiple custom blocks.
This airlock is just one of many in my model. Without referring to the same code, I'll have multiple copies that need to refer to each other's restricted areas and the flowcharts become huge and complicated. Is there a way to get around this?
EDIT:
I'm not sure what to do with these ports. They have no properties that do anything:
EDIT2:
Here's a file to see the behavior - Model2.zip
The Prepared flowchart portion is set to "ignore" so the code will run. You can see the operators and the carts passing through AL_2216 with only 2 being allowed at a time. If you uncheck "ignore" for the prepare flowchart, the error will trigger.
AnyLogic sent the right answer!!
So I was asking Anylogic a different question and they recognized my name from this post! They sent a fix to me and it works exactly the way it should! The exception error message I was getting "out: 0 isn't supported for..." made me think the exit/enter blocks were not supported in perparation flowcharts.
But actually, the seizeCart block didn't know where to start the prep flowchart because it wasn't directly connected to the resource task start block. A quick setting change under the Advanced section of the seizeCart block defining which resource task start block to start at did the trick! Here's the email from AnyLogic:
-The error text and documentation are not sufficient for understanding this (the error text is confusing), I suppose it is obsolete error text. We will rectify the description;
-Under the question there is a more generic discussion which seems to be unrelated to the initial problem. Please let me know if I miss something or if your model does not work as you expect even after adjustment of seizeCart block property.
I think you should replace the Enter and Exit blocks that lead to the bottom input of your seizeCart Seize block with simple Port objects (from the Agent palette).
As per the help for Seize:
So it wants a direct link to a ResourceTaskStart flow and your Enter/Exit combinations might be ... not "direct" enough... Try it.
So here's what I ended up doing. It's the best I could come up with that could be easily replicated for lots of airlocks.
I've added a wait block (dummyThruAL_2216) to my Product flowchart prior to seizing the cart. This wait block injects a new Agent into sourceDummy at the cartHome node. The dummy then seizes a cart and moves through the airlock and it's restriction. Upon exiting the restriction, I check what type of agent and direct the agent to the correct exit block. The dummy agent and cart move to the Product where the dummy agent releases the cart and sinks. The sink frees the wait block and the Product seizes the cart that is right next to it and continues on it's journey.
It's an easy copy/paste to add more airlocks. Not as nice as my original, but what are you going to do... Thanks for everyone's help and suggestions.
As others have said, there are (not really documented) restrictions on what blocks you can use in preparation and wrap-up flowcharts, which mean what you're attempting won't work.
As you say, it's important to keep a single 'instance' of the airlock flow so that the restrictions (queue and restricted area) are 'global' when this represents the same physical airlock. (Otherwise a repeated custom block is precisely what you should use for each different physical airlock.)
Your best option (and assuming you needed to attach the Cart resource to the Product) is probably to
Add dummy agents (via Source block inject calls) to a separate mini-process that represents your resource preparation requirement (but now not attached to the Seize block).
Replace the Seize in your main process with a Seize-Wait-Release-Seize combination:
The Seize block seizes the cart as normal (without moving or attaching it; no 'Send seized resources' or 'Attach seized resources' options) and then injects an agent into your mini-process (which can use Exit and Enter blocks to use the airlock sub-process). This agent represents the seized resource agent (Cart) and thus should start where it starts and be animated so it looks like it. (You can make the actual Cart temporarily non-visible during this mini-process.)
When the agent reaches the end of the mini-process (at a Sink block), instantly move the related Cart to your node (use jumpTo), make it visible again and free the Product agent from the Wait block
Release the seized Cart and then immediately re-Seize it, but now attaching it (so the animation looks correct). If you use the Resource selection 'Nearest to the agent' option you should be guaranteed to seize the correct cart. (You can also use the 'Customise resource choice' option with some code to ensure that you absolutely always choose the same Cart.)
(It is simpler than the above if you don't care about having a correct animation, and you can use custom blocks to make this block combination reusable and thus not too clunky.)
Edit: A very similar alternative which also works (and is the basis for your own answer) is to have a dummy agent representing your Product in the sub-flow which seizes (and attaches) the actual Cart agent, leaving it at the Product's location to be immediately seized as above. This is slightly better since you don't have to worry about the visibility and 'jumping' of the real resource agent, plus you can move a Seize and a Release from the main flow (which now just has Wait-Seize) to the sub-flow (thus 'hiding them away').
For a project I'm trying to select the right output if a parameter of the created agent is true. The agent is created in the main but goes into a different agent for the selection of the output. If I use a select in the main and use the statement for the parameter as condition it works fine. Whenever it enters the agent and I use the same statement it gives an error (Description: product1 cannot be resolved or is not a field. Location: testCase5/Transport/selectOutput - SelectOutput).
I tried using different conditions like main.agent.product1 . Can't seem to solve the issue. I know that it has to do something with declaration probably but I'm clueless at the moment.
//for the condition that works if I put the selectOutput in the main
agent.product1
//for the condition in the agent I tried the same but didn't work. also tried
main.agent.product1 // Gives the same error but for (Description: agentcannot be resolved or is not a field.)
(Main)agent.product1
//And a few more
In AnyLogic each block of a project flow (regardless if from the process modeling library, the pedestrian library or another) has the type of Agent that is flowing through it defined in its properties. You can find this setting as Agent type in the block's properties under Advanced.
If you fail to set this correctly (meaning this setting equals the type of Agents you let flow through it), it will still flow through, BUT: you cannot access the specific properties of the Agent type.
That said, usually you do not even have to think about, because AnyLogic has an automatism there: The first block of your process flow, typically a Source-block or a Enter-block is the only block where you have to make the correct setting, all attached blocks get it then automatically!
However this does not work when:
You have separate flows (eg. you leave one flow through an Exit-block and enter another by an Enter). You'll manually have to put the correct setting also for the first block of the second process flow.
Your process flow is continued inside of another Agent/Custom Block, as in your example. AnyLogic doesnt realize the process flow inside your custom block is logically connected to the outside process flow in main. You have to specifiy manually again the Agent type flowing through in the first block of your process inside your Custom Block.
We are developing an ABM under AnyLogic 7 and are at the point where we want to make multiple simulations from a single experiment. Different parameters are to be set for each simulation run so as to generate results for a small suite of standard scenarios.
We have an experiment that auto-starts without the need to press the "Run". Subsequent pressing of the Run does increment the experiment counter and reruns the model.
What we'd like is a way to have the auto-run, or single press of Run, launch a loop of simulations. Within that loop would be the programmatic adjustment of the variables linked to passed parameters.
EDIT- One wrinkle is that some parameters are strings. The Optimization or Parameter Variation experiments don't lend themselves to enumerating a set of strings to be be used across a set of simulation runs. You can set a string per parameter for all the simulation runs within one experiment.
We've used the help sample for "Running a Model from Outside Without Presentation Window", to add the auto-run capability to the initial experiment setup block of code. A method to wait for Run 0 to complete, then dispatch Run 1, 2, etc, is needed.
Pointers to tutorial models with such features, or to a snip of code for the experiment's java blocks are much appreciated.
maybe I don't understand your need but this certainly sounds like you'd want to use a "Parameter Variation" experiment. You can specify which parameters should be varied in which steps and running the experiment automatically starts as many simulation runs as needed, all without animation.
hope that helps
As you, I was confronted to this problem. My aim was to use parameter variation with a model and variation were on non numeric data, and I knew the number of runs to start.
Then i succeed in this task with the help of Custom Variation.
Firstly I build an experiment typed as 'multiple run', create my GUI (user was able to select the string values used in each run.
Then, I create a new java class which inherit from the previous 'multiple run' experiment,
In this class (called MyMultipleRunClass) was present:
- overload of the getMaximumIterations method from default experiment to provide to default anylogic callback the correct number of iteration, and idnex was also used to retrieve my parameter value from array,
- implementation of the static method start,
public static void start() {
prepareBeforeExperimentStart_xjal( MyMultipleRunClass.class);
MyMultipleRunClass ex = new MyMultipleRunClass();
ex.setCommandLuneArguments_xjal(null);
ex.setup(null);
}
Then the experiment to run is the 'empty' customExperiment, which automatically start the other Multiple run experiment thru the presented subclass.
Maybe it exists shortest path, but from my point of view anylogic is correctly used (no trick with non exposed interface) and it works as expected.