When trying to access https://console.actions.google.com/project/*project-id*/release/ I get following error message:
If I open the developer console in Chrome and check for failed network calls it shows a 504 on https://console.actions.google.com/m/actions/agents/versions/get?projectNumber=*project-number* with this body:
I tried clearing my cache and tested on multiple browsers but since it also happens on other devices I guess this is a server issue.
Anyone who can help me out?
I was experiencing the same issue for a published Action.
According to Actions on Google support, it's because the cumulative size of all the versions of our action were causing that version request to timeout when it tries to pre-load them all at once.
The solution for me was to, raise a support request (I clicked the link in your screenshot, Actions on Google Support, included a screenshot of that message, request type deployment issue and a brief description of not being able to access the deploy/test tabs) and then when support responded, they asked which versions to keep/delete. I said delete all except one version either side of the currently deployed version.
A note on preventing this - I couldn't find a consistent method for deleting versions/releases. I believe the versions created in Dialogflow by doing a Publish A Version can be deleted in Dialogflow. But versions created by releases in Actions on Google, have the delete options greyed out in Dialogflow, and I couldn't find where to do that in Actions on Google.
Related
I deployed the production release for my first Google Action. But even 2 weeks after the approved deployment I can find my action neither in the Google Assistant store nor directly via voice activation.
The test versions ran fine and was found every single time. So the invocation name should not be the problem. When I use the generated action link from the console I find the action in the store and can send it to my Smartphone, where I can start it with the sent link. But after closing the app I cannot open it again via voice.
I used two different google accounts on different devices (all are set up in the right language: german), but no chance.
Is this a mistake on Googles side or do I miss anything? In this state I have to open the action every time over the action link which is useless for a voice app :)
Here is the link to my action: https://assistant.google.com/services/invoke/uid/000000c77f740137?hl=de
The invocation would be for example: "Mit Erfolgs-Fans sprechen" (like said, on the test this name was found every single time)
This happened to me too. Though it wasn't in production when I faced it. I was also not able to see the action in Assistant-enabled devices (Google home app/assistant).
It is probably not the invocation name issue, it is just that the action is not being made visible across all the platforms. Some of the solutions I tried were-
Clean cache of the device
Create a new action with everything just the same as in your current actions. It worked once for me!
Go to GCP and under your project, try to understand if there is any pending activity.
Once I created so many actions because I wasn't able to see it that after around 30 days all those actions started to become visible. So, if you can wait that is fine.
In the end, do contact their support with all the relevant information. I hope they should be able to help.
Thank you!
I am developing web extension for VSTS. I am using vss sdk of Microsoft.
I got some issue.
You can see on the image that there is new line - App insights Settings
This pop up appears on clicking on 3 dots near every release definition on page of list of all releases.
This button navigates user to some environment of some specific release.
Example of link:
https://ozcodedev.visualstudio.com/OzCode/_releaseProgress?releaseId=372&_a=release-environment-logs&environmentId=850
The problem that I do not know how to fetch list of releases and environments for building this link.
How can I get them on page All release pipelines.
Through the GUI it is not possible to get all the release ids and the environment ids for each step. However this is possible through the VSTS APIS. You could use the release endpoint to and iterate to obtain your release id
https://{accountName}.vsrm.visualstudio.com/{project}/_apis/release/releases?api-version=4.1-preview.6
Once you have the release id you can use it like so
https://{accountName}.vsrm.visualstudio.com/{project}/_apis/release/releases/{releaseId}?api-version=4.1-preview.6
Within the returned JSON you can follow iterate the path environment[n].id to obtain the environment id.
You can then construct the link using this information.
Hope that helps
Ok. So after working 2 days on this issue I found solution.
1.It is possible to fetch data that I wanted on Client Side. For this I used Microsoft's library vss-web-extension-sdk. Install it - npm install vss-web-extension-sd --save.
2.Add relevant scopes to your vss-extension.json. In my case the problem was - that I needed data that relates to managing of VSTS user releases. So after Including "vso.release_manage" to my scopes array I stopped to got 401 Unauthorized error because access token was changed according to new scopes.
https://learn.microsoft.com/en-us/vsts/extend/develop/manifest?view=vsts#scopes
In this documentation you can check which scope controls which resources that can be accessed by your extension.
You can use our ts/js clients to get whatever you want for your experience.
We have extensive documentation available here. Let me know if you are blocked anywhere.
I have extended Manage journal Entries app in Web Ide. Haven't added any extra code. Just saved it and run to check whether the app is opening as expected or not. But I am facing error " Could not open app, Please try again later".
Come across few threads regarding similar issue but my issue is not while launching, It is when extending manage journal entries app.
Fiori : Could not open App
Pre Requisite which I have checked:
SICF Service is Active.
component UIS4HOP1 200 SP 0000 is installed in my FrontEnd Server.
Thanks,
Srilaxmi
From the error message in the commments section it seems like you have problems with the namespace of the component. Did you check that the path and the namespace for your extension project matches the deployed app? This can very easily mess up the component loading mechanism in FLP and lead to the described result...
My hosted app is showing a floating banner with a notice saying “Installation of this item may not work properly.” on its Google Chrome Web Store product page. The app is undiscoverable by searching the Web Store.
What is causing this problem? I find no additional information in the developer dashboard.
If you get this message, it is probable that there really is an error in the manifest or locale files (For example, in my case it was a trailing comma on the locale files).
The process y follow to solve the problem was:
Try to instal the app version you have just submited to the chrome store. When you try to install the app you will probably get a error message thats points you on the track of the problem of your manifest file.
Solved the problem on the app and upload it again. You may get the same error on the developers panel. Two thinghs can be appening:
A) If you've already corrected all errors in the manifest files remenber to publish the changes and what is more important remenber that the publication process may take a few minutes to become effective. The message will disappear after a while if everything is okay. (This explains why is you look on the internet for that problem you find people saying that the message will disappear after a while)
B) If error persist event after the publishing process have been complete finished. You may have not solved all error on the manifest file go back to Step 1
cheers
I had this exact problem. When I tried installing, I got an error message about a missing file.
When I removed my locales directory, everything worked fine.
I got this warning message on Chrome whith My facebook application.
The method FB.JSON.parse is not officially supported by Facebook and access to it will soon be removed.
and
The method FB.JSON.stringify is not officially supported by Facebook and access to it will soon be removed.
When this flash is loaded this message appears.
I'm using Facebook Flash AS3 API 1.8.1, SWFObject 2.2.
What does it mean ?
Test here (facebook test): https://apps.facebook.com/vuvuzelagame/
Thanks.
I have the same error on my application.
As you probably know, the Facebook AS3 API calls JavaScript functions to communicate with FB, and, as Baris says, this error is a warning that one of those JS functions that it calls is deprecated and will soon be removed.
You can safely ignore it for the present. Hopefully the API will be updated before the function is actually deprecated, otherwise we may get a breaking bug rather than just a warning. I'm going to keep an eye out for updates to the API and upgrade my code as soon as one is released.
Or, if you're feeling really brave, you can go digging in the API source and fix the issue yourself :)
A few days ago, many flash apps suddenly stopped working, if you have this problem follow this steps:
If you are using GraphAPI_Web_1_8_1.swc delete it
Download the modified graph API from here
Paste those folders on your library, if you had the facebook folder overwrite it
Publish your project
This problem started when facebook changed its file http://connect.facebook.net/en_US/all.js in a way that all the calls made from the AS3 file FacebookJSBridge.as must be changed from FB.JSON to just JSON.
(Source)
FB.JSON.stringify is that a javascript function or actionscript function?
In flash if you are targetting flash player 11 and up you can just use JSON.parse and JSON.stringify, or you can use the JSON class in the com.adobe.serialization package.
If that is a javascript method, just get a json library from the web.
The error just means facebook is no longer supporting/updating that function and they will remove it. It will stop working soon so you should replace your usages of it with something else.