I have a CMS theme installed on my machine. I'm tracking changes to it via git
and decided to back it up on GitHub so I could share those changes.
The theme as provided is also available on GitHub. On my machine I have added
this as a remote upstream. Now I can easily see the changes between my master
and the remote upstream by using the following command:
git diff --color master upstream/number
If I could add the remote upstream on GitHub I could easily share these changes.
Is it possible to set this relationship on GitHub?
I have tried the following:
git push -u origin upstreambranch
which adds an upstreambranch to the master on GitHub. However trying to
compare both branches doesn't work, the result I get on GitHub is that: "There
isn't anything to compare"
Is there an alternative way to compare these?
If the problem is "main and master are entirely different commit histories.", the following will work
git checkout master
git branch main master -f
git checkout main
git push origin main -f
The Short Answer
It looks like GitHub won't let you compare the branches because they don't
actually share any of the same history at all, even though they may share
much of the same files and code.
Here is a screenshot of the temporary fork I made of your repo, where I tried to
compare master with the upstreambranch, like you described. Notice the error
message:
It says:
There isn't anything to compare.
master and upstreambranch are entirely different commit histories.
The Long Answer
You probably downloaded the original source and added it to a completely new
repo instead of cloning the original repo, right? Doing that will make it so
that the history of your repo will be completely different from the
history of the original repo, since your new repo won't have any of the same
commits with the same sha IDs.
You can see that by doing a reverse log of your master branch and the
upstreambranch:
# Your first commit, see commit sha
git log --reverse master
commit c548d7b1b16b0350d7fbdb3ff1cfedcb38051397 # <== HERE
Author: Padraic Stack <padraic.stack#nuim.ie>
Date: Wed Apr 2 15:11:28 2014 +0100
First commit of everything
# First commit sha of the original repo
git log --reverse upstreambranch
commit 105a12817234033c45b4dc7522ff3103f473a862 # <== THERE
Author: Jeremy Boggs <jeremy#clioweb.org>
Date: Mon Feb 22 16:00:53 2010 +0000
Creates repo directories for the Seasons theme.
Solutions
If you redo your commits on top of the original history, you should then be able
to compare the branches. There are several different ways that you can redo your
commits, including
git rebase --onto
and
git cherry-pick
You also can redo each commit manually, if you have to.
I had a similar situation, where my master branch and the develop branch I was trying to merge had different commit histories. None of the above solutions worked for me. What did the trick was:
Starting from master:
git branch new_branch
git checkout new_branch
git merge develop --allow-unrelated-histories
Now in the new_branch, there are all the things from develop and I can easily merge into master, or create a pull request, as they now share the same commit hisotry.
I solve my issue using these commands
git checkout [BRANCH]
git branch master [BRANCH] -f
git checkout master
git push origin master -f
You can force update your master branch as follows:
git checkout upstreambranch
git branch master upstreambranch -f
git checkout master
git push origin master -f
For the ones who have problem to merge into main branch (Which is the new default one in Github) you can use the following:
git checkout master
git branch main master -f
git checkout main
git push origin main -f
The following command will force both branches to have the same history:
git branch [Branch1] [Branch2] -f
From the experiment branch
git rebase master
git push -f origin <experiment-branch>
This creates a common commit history to be able to compare both branches.
This looks like undesirable behavior on github's part, but it's fairly easy to fix. What you want to do is to rebase your branch on a reasonable (any reasonable) commit in the existing history. What you can do is to fetch the github repo and find which tree in its history is most similar to the one you started with. Start this way:
git remote add github u://r/l
git fetch github
myroot=`git rev-list master --max-parents=0`
root_tree=`git rev-parse $myroot^{tree}`
github_base=`git log --pretty=%H\ %T github/master | sed -n "s/$root_tree//p"`
With any luck, that will find you a commit in the github history that has the exact tree you started with. Assuming it does,
git rebase --onto $github_base $myroot master
and you're done.
If that doesn't find a matching tree, you get to find a nearest approximation. Here's one way to get a rough estimate of the differences:
git log --pretty='echo %H $(git diff-tree -p -b -U0 '$myroot:' %T|wc -l)' github/master \
| sh
which will count the lines in a minimized diff between the tree of each commit in the github/master history and your root tree. It seems reasonable to hope for a nice small difference, you could eyeball the actual diffs on it before calling that the github_base commit and doing the rebase above.
Terminology
First, let's get some terminology out of the way...
upstream <= The remote git repo (likely whose master or release branch is in production)
forked-repo <= The remote [experimental git repo] (https://docs.github.com/en/github/getting-started-with-github/fork-a-repo) also known as "origin".
local repo <= The files and directories that you work with on your local workstaion, which you likely got by running a git clone my-forked-repo.git command
local index <= Also known as your local git "stage", i.e., where you stage your files before pushing them to you remote repo.
Github workflow process
Next, let's talk about the process of getting your changes to the upstream repo:
The process is generally to work on a feature branch and then push said branch, and open a Pull Request, either to your forked-repo's master branch or to the upstream's master branch
Create a feature branch by running git checkout -b FEATURE_BRANCH_NAME
Add/delete/modify files project files.
Add files by running git add .
Commit your files to your index by running git commit -m'My commit message'
Push your staged files by running git push origin FEATURE_BRANCH_NAME
Solution for entirely different commit histories
The master and upstreambranch are entirely different commit histories message can occur when you've forked a git repository and have changed your git history.
For example, if you fork a repo and pull your forked repo to work on it locally...
If then you decide to rewrite the entire application and then decide it's a good idea to deleting all existing files, including the forked-repo's .git directory. You add new files and directories to recreate your app and also recreate your .git directory with git init command.
Now, your application works great with your new files and you want to get it merged into the upstream repo. However, when you push your changes you get that "...entirely different commit histories..." error message.
You'll see that your original git commit will be different in your new local directory and if in your remote fork (as well as your upstream). Check this out by running this command in your current directory: git log --reverse master. Then running the following: pushd $(mktemp -d); git clone https://github.com/my-forking-username/my-forked-repo.git; git log --reverse master; popd
You must fix your local .git repo to match your remote my-forked-repo if you want to push your commits and subsequently perform a pull request (in hopes of merging your new updates to the upstream/master branch).
git clone https://github.com/my-forking-username/my-forked-repo.git
cd my-forked-repo
git checkout -b my-new-files-branch-name
# Delete all files and directories except for the .git directory
git add .
git commit -m'Remove old files'
# Copy your new files to this my-forked-repo directory
git add .
git commit -m'Add new files'
git push origin my-new-files-branch-name
Create a PR on GitHub and request to merge your my-new-files-branch-name branch in your my-forked-repo into master.
Note: The "...entirely different commit histories..." error message can also occur in non-forked repos for the same reasons and can be fixed with the same solution above.
A more simple approach where you can't mingle with the master.
Consider i have master and JIRA-1234 branch and when i am trying to merge JIRA-1234 to master i am getting the above issue so please follow below steps:-
From JIRA-1234 cut a branch JIRA-1234-rebase (Its a temp branch and can have any name. I have taken JIRA-1234-rebase to be meaningful.)
git checkout JIRA-1234
git checkout -b JIRA-1234-rebase
The above command will create a new branch JIRA-1234-rebase and will checkout it.
Now we will rebase our master.
git rebase master (This is executed in the same branch JIRA-1234-rebase)
You will see a window showing the commit history from first commit till the last commit on JIRA-1234-rebase. So if we have 98 commits then it will rebase them 1 by 1 and you will see something like 1/98.
Here we just need to pick the commit we want so if you want this commit then don't do anything and just HIT Esc then :q! and HIT ENTER.
There would be some changes in case of conflict and you need to resolve this conflict and then add the files by
git add <FILE_NAME>.
Now do git rebase continue it will take you to rebase 2/98 and similarly you have to go through all the 98 commits and resolve all of them and remeber we need to add the files in each commit.
Finally you can now push these commits and then raise Pull Request by
git push or git push origin JIRA-1234-rebase
This happened for me because I created a repo from GH, but then I also added a README. In doing so I created a commit on my remote.
Then I went and created a new repo locally, made some changes and committed. Then I pushed it to the 👆repo and tried to make a Pull Request.
But my remote's initial commit was different from my local's commit, hence this error message. GitHub itself even warns you against this:
Create a new repository on GitHub.com. To avoid errors, do not initialize the new repository with README, license, or gitignore files. You can add these files after your project has been pushed to GitHub.
GitHub Docs
Similarly if you're creating a new repo, GitHub will quietly suggest that you skip initializing the repo. Rather just define the repo.
tldr the very first commit has to be identical, you can't merge 2 commits that don't have an identical initial commit.
If you know from which commit issue started, you can reset your branch to that commit and then merge them.
this is 100% works in any situation :
1)create new folder in your machine
2)clone the remote repository to the new folder
3)delete all files and folders except for the .git folder
4)add your project files that you are working on to this new folder you created
5)open terminal
6)cd new_folder_path (path to the new folder you created)
warning : don't type > git init
7) > git add .
8) > git commit -m "write anything"
9) > git push URL(url of the remote repository)local_branch_name:remote_branch_name
This happened with me yesterday cause I downloaded the code from original repo and try to pushed it on my forked repo, spend so much time on searching for solving "Unable to push error" and pushed it forcefully.
Solution:
Simply Refork the repo by deleting previous one and clone the repo from forked repo to the new folder.
Replace the file with old one in new folder and push it to repo and do a new pull request.
I solved that problem. In my case when i did “git clone” in one directory of my choice without do “git init” inside of that repository. Then I moved in to the cloned repository, where already have a “.git” (is a git repository i.e. do not need a “git init”) and finally I started do my changes or anything.
It probably doesn’t solve the problem but shows you how to avoid it.
The command git clone should be a “cd” command imbued if no submodule exists.
I got this error when initializing a GitHub repository with a README file, and then trying to push my existing local git repository to it. This resulted in a main branch with the README file, which was the Default branch, and a master branch with my code, and they couldn't be merged.
But since I didn't actually have anything important in my main branch (if you need to keep the data from both your branches, check out PaianuVlad23's Answer instead), I managed to solve the problem by changing the Default branch to the master branch, and then delete the main branch, like this:
When in GitHub, click your user icon in the top right of the window.
Choose "Your repositories", and then click your repository name.
Under the repository name, choose the tab "Settings".
From the pane on the left, choose "Branches".
Under the headline "Default", change the default branch from the one you want to delete (in my case main) to the one you want to keep (in my case master).
Now, click the tab "Code" under the repo name.
Under the tab line containing "Code" etc, you'll see a place where it says "2 branches". Click it.
Find the branch you want to delete, and click the trash bin icon on the right on that line.
Now, your repository has only one branch, which is the one you want to push your local changes to! 🙂 Just as if you hadn't initiated your repository before pushing to it, as #mfaani's answer in this thread suggests you do it.
I found that none of the answers provided actually worked for me; what actually worked for me is to do:
git push --set-upstream origin *BRANCHNAME*
After creating a new branch, then it gets tracked properly. (I have Git 2.7.4)
I don't think we have same case here, but still someone else may find it helpful.
When similar error occurred to me, it was going to be the first merge and first commit. There was nothing in on-line repository.
Therefore, there was no code on git-hub, to compare with.
I simply deleted the empty repository and created new one with same name.
And then there was no error.
I got this error message, because I was migrating an application from SVN to GitHub and it's not enough to invoke a git init in the location of the source code checked out from SVN, but you need to invoke a git svn clone in order to have all the commit history.
This way the two source codes on GitHub will have a mutual history and I was able to open pull requests.
I had an issue where I was pushing to my remote repo from a local repo that didn't match up with history of remote. This is what worked for me.
I cloned my repo locally so I knew I was working with fresh copy of repo:
git clone Your_REPO_URL_HERE.git
Switch to the branch you are trying to get into the remote:
git checkout Your_BRANCH_NAME_HERE
Add the remote of the original:
git remote add upstream Your_REMOTE_REPO_URL_HERE.git
Do a git fetch and git pull:
git fetch --all
git pull upstream Your_BRANCH_NAME_HERE
If you have merge conflicts, resolve them with
git mergetool kdiff3
or other merge tool of your choice.
Once conflicts are resolved and saved. Commit and push changes.
Now go to the gitub.com repo of the original and attempt to create a pull request. You should have option to create pull request and not see the "Nothing to compare, branches are entirely different commit histories"
Note: You may need to choose compare across forks for your pull request.
Top guy is probably right that you downloaded instead of cloning the repo at start.
Here is a easy solution without getting too technical.
In a new editor window, clone your repo in another directory.
Make a new branch.
Then copy from your your edited editor window into your new repo by copy paste.
Make sure that all your edits are copied over by looking at your older github branch.
I had mine solved by overriding the branch:
My case: I wanted to override whatever code is in the develop with version_2.
delete the local copy of conflicting branch:
git checkout version_2
git branch -D develop
checkout a fresh branch from the version_2 and force push to git:
git checkout -b `develop`
git push origin `develop`
I didn't need to rebase. But in my case, I didn't need to take code from my old code.
first: pull from remote repo
merge or rebase
finally: push to remote repo
finish
When you are pull/merging feature to main and are in the main branch in the terminal, I successfully used 'git pull origin feature --allow-unrelated-histories'.
Before using this command, I had the same message about completely different commit histories, and I think it's because I accidentally pushed to main after committing to the feature branch. Then I tried some of the solutions offered here like rebase, which allowed me to merge my code, but I still had the compare and pull notifications through git, and it was a one time fix. By one time fix I mean I still got the different commit history message the next time I tried to merge a feature branch's code to main.
Another source from a google search offered the --allow-unrelated-histories fix, and it permanently works exactly how I wanted it to. The branches were merged and now I can merge without error messages and the compare and pull notifications work through git.
I'm sure there are consequences for people who didn't have the same problem as me, but I didn't lose any code and now my repo is clean. Also, I'm also an amateur coder and the question is older so maybe this command wasn't available when the question was asked or I'm not understanding the issue correctly.
I wanted to copy commit history of "master" branch & overwrite the commit history of "main" branch .
The steps are:-
git checkout master
git branch main master -f
git checkout main
git push
To delete master branch:-
a. Locally:-
git checkout main
git branch -d master
b. Globally:-
git push origin --delete master
I have the ip, useename and password of the github server, which uses gitlab, and I need to connect to it and manage files. What should I do?
I'm assuming you're asking how to manage/change files within a git repository. If you're asking something else, I've missed the point, apologies.
Firstly you will need 'git' on your local machine - install it with your package manager or download and install it from the git website.
Once git is installed you can clone a repository (which contains a set of files, and ends in .git) using the git clone command. Run git clone --help for more information on this, but if you already know the address of your git server and the path to the repository, it will look something like as follows:
git clone https://git-server.url/path/to/repo.git
Note that the URL you should use will depend on the configured transport protocol (git, ssh, http[s]) of your git server.
Next, you should makes some local configurations, for example, from a terminal:
git config user.name "your_username"
git config user.email "someone#example.com"
You can add --global to both of these command if you want these changes to persist outside of the current git repo.
Having a cloned repository automatically checks out an initial 'branch' on which you can make changes to files within your repository. See the git docs for a detailed explanation of a branch.
Files can be added, removed or renamed/moved using git add, git rm or git mv respectively.
Finally, you must commit your changes and push them
git commit -m "A message describing your changes"
git remote will confirm the name of the default remote (repo location). In this case, it is assumed to be origin. You can then push your changes to an existing branch (viewed using git branch -r), assumed to be master below:
git push origin master
Here you would be merging your master branch with the remote one. Clearly your permissions/project conventions will dictate what you can/should do to this repo.
This is my first day at using GITHUB and I am stuck with this issue despite lot of googling. Her are the steps which I have done so far
cloned a repository
git clone https://github.com/OfficeDev/Complete-Me-Code-Sample.git
Now since I don't want to corrupt the main branch, I created my own branch
git branch validation
Now I switched to my branch
git checkout validation
Now I made all my changes locally. After this I created the remote branch
git remote add validation https://github.com/OfficeDev/Complete-Me-Code-Sample.git
Now I try to uploaded all my code
git push complete-me-code-sample validation
it asks me for user name and password and then gives me an error
fatal: 'complete-me-code-sample' does not appear to be a git repository
fatal: Could not read from remote repository.
Please make sure you have the correct access rights and the repository exists.
But isn't git open for everyone? or do I need to contact the owner of this project and ask for rights? if yes, what rights I should ask for?
At this point of time, I am finding too much information and its hard for me to proceed without doing a PHD.
Can you please tell me how I can checkin my code ... as well as point me to a resource which can teach me git without too much RTFM.
Your error is simple and it's git related, not github. Here it is:
Now I made all my changes locally. After this I created the remote branch
git remote add validation https://github.com/OfficeDev/Complete-Me-Code-Sample.git
This is not how you create a remote branch, in here you've added another origin (named validation), which basically is another clone of the same repo. You said that other repo is located at that address which is not true, as nothing exists there.
When you git push if the remote branch doesn't exist it is created by default, so if you simply skipped that step the branch would have been created fine.
The correct and optimised steps should have been:
git clone https://github.com/OfficeDev/Complete-Me-Code-Sample.git
// Creates and changed branch at the same time
git checkout -b validation
// You'll need to commit files first, just in case you missed that
git commit -am "my sample commit"
// Depending on how you set up the repo git push could be enough
git push origin validation
Try this and let me know how it went.
I am beginner for gitHub. I have used svn before but I am not getting grip on github after going through many tutorials on the net. I have no idea about basic work flow. I created clone by using github. If I make any change in file suppose file_A then what is right step to push this file on server:
I am assuming :
git status->git commit->git pull -> git push
I have doubt that it push all project files on server But i was expecting to update only file_A. Please suggest me complete command/syntax with file path.
You are not pushing files but changes. So if you have cloned a repository with a lot of files and only changed one of them, you're only sending in the change to that one file. In your case that would be:
git clone git#github.com/some/repo .
git status # nothing has changed
vim file_A
vim file_B
git status # file_A and file_B have changed
git add file_A # you only want to have the changes in file_A in your commit
git commit -m "file_A something"
git status # file_B is still marked as changed
You can and should continue doing changes and commiting them until you're pleased with the result. Only then you should push the changes back to GitHub. This assures that everybody else cloning the repository in the meantime will not get your potientially broken work-in-progress.
git pull origin master
git push origin master
will send in all commits you made after you cloned the repository.
If I could make a suggestion - you might find it easier to not focus first on Github. Instead, if you have not already, go through an online book/tutorial for git (not Github) and learn the basics of git using the command line on your local machine and without involving a remote server or service like Github. In fact you do not even have to be connected to the Internet to learn much of git. This online book is excellent and starts at the beginning and teaches you how git works. Once you are confident in the basics you can start connecting to remote machines like Github.
Git Commands to update files in git:
To Add Upstream: (Initially You need to do it)
git remote add upstream
Save Local Changes to Temp
git stash save
Updating Local From Master
git pull --rebase upstream master
Apply Local changes Done earlier on latest Code taken from git master
git stash apply
To Update Fork:
git Status
git add "Resource Name to Add to Fork"
git Commit -m " Comments"
To Put these changes in Master:
git Push
Then Create Pull Request from Fork
Updating Fork From Master
git push origin master
I have staged my files like this
git add mydir
git add mydir/myfile
and then pushed them to my repo
git remote add origin https://github.com/usename/myrepo.git
git push origin master
When I look at git status -s it says my files have been added, but I cannot see them in my actual repository. Does anyone know whats going on here?
You have not "added" your files to the repository, only to the staging index.
You need to git commit to get your changes from the staging index to the repository.
git status shows you the status of the working tree and staging index. git log shows you the status of the history - in other words, git log will show you what's been committed to the repository.
As an example, see this git status output:
git status
# On branch master
# Changes to be committed:
# (use "git reset HEAD ..." to unstage)
#
# modified: Game.py
#
In this case, we can see that the changes to be committed involve Game.py. Note that these changes haven't yet been added to the repository - they're just staged, ready to be committed, as the git status says.
The next step is to commit these changes we've prepared in the staging index and add them to the repository. git commit is the command to do this.
This answer, as well as the linked Pro Git book, have some excellent reading which will help you understand the setup and steps in committing to a git repository.
I cannot see them in my actual repository.
What do you mean by "actual" repository? I am presuming you mean you can't see a local commit, but there may be some confusion about the repositories you're using.
You're using two repositories, one local and one remote. The remote repository is, in your case, on GitHub. You do your work locally, then git push to remote.
First, local changes and commits
So the steps to get your code changes into the local repository are as follows:
Make changes in your working directory. This is most often writing some code.
Build a commit by staging changes. This is done using git add.
"Save" the commit you've built into the repository. This is done using git commit.
These steps take place **locally*. None of these steps have any affect on your GitHub repository.
Secondly, git push to the remote repository (in this case, your GitHub one).
To get your code from local to remote repositories, git push is used.
Check what remote repositories are known by your local repository: git remote -v.
If the GitHub repository is not shown, you'll need to add it: git remote add <NAME> <URL>.
Because you didn't git clone, the two repositories (local and remote) don't have any commits in common. That's ok; it just means git doesn't automatically know where to push your changes, so you'll have to specifiy: git push <NAME> master:master. That'll push your local master branch to the <NAME> master branch.