I'm currently missing with GPS configuration and didn't know where is the problems, please if someone have an idea to share with me the solution,
I'm using Raspberrypi 4 Model B 4GB RAM and a sim808 GPS module,
Sim808 GPS module
I did TX pin to RX, RX to TX pin, VCC to 5V, ground to ground.
also I did those configuration:
sudo nano /boot/cmdline.txt :
dwc_otg.lpm_enable=0 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline rootwait
sudo nano /boot/config.txt :
/boot/config.txt
sudo nano /etc/default/gpsd :
etc/default/gpsd
output
Please help!
Related
I have a problem in getting the I2C working on a Raspberry Zero 2 with Buster (10) 2022-09-22.
The I2C interface is enabled (Preferences > Raspberry Pi Configuration > Interfaces).
If I run the command: i2cdetect -y 1
I get the error: Error: Could not open file `/dev/i2c-1' or...
Any suggestion?
I have cloned the yolov5 repository in my raspberry pi OS
git clone https://github.com/ultralytics/yolov5
Updated torch and installed the requirements.txt file
However, when I run inference with detect.py
python3 detect.py --source data/images --weights yolov5s.pt --conf 0.25
It shows an error saying
detect: weights=['yolov5s.pt'], source=data/images, data=data/coco128.yaml, imgsz=[640, 640], conf_thres=0.25, iou_thres=0.45, max_det=1000, device=, view_img=False, save_txt=False, save_conf=False, save_crop=False, nosave=False, classes=None, agnostic_nms=False, augment=False, visualize=False, update=False, project=runs/detect, name=exp, exist_ok=False, line_thickness=3, hide_labels=False, hide_conf=False, half=False, dnn=False, vid_stride=1
YOLOv5 🚀 v6.2-219-ga83d2a5 Python-3.9.2 torch-1.13.0 CPU
Fusing layers...
Illegal instruction
I ensured I have installed the requirements and updated torch so I do not know what is going wrong, and I will appreciate any help
I'm going mad with a stupid issue I can't solve.
During the testing of my Yocto project I always used connmactl in order to connect my board to the internet.
Now I am going to release the product but before releasing I am working on an “internet connection manager”
I guess I can’t use connmanctl anymore since it consist in an interactive command (isn’t it?) so I’m going to use directly wpa_supplicant.
In my script I edit wpa_supplicant.conf as follow:
root#localhost:~# cat /etc/wpa_supplicant/wpa_supplicant.conf
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
update_config=1
bgscan=""
network={
ssid="Obi_Lan_Kenobi"
psk="TheForceIsStrongWithThisOne"
}
After that I try to start wpa_supplicant with this command:
wpa_supplicant -B -i mlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf wext
as result of this command I get:
Successfully initialized wpa_supplicant
But if I try to ping google.com (or any other website) i seet that the network doesn’t work, In particular I get this message: ping: sendto: Network is unreachable
Everything is working under connmanctl, but not under wpa_supplicant.
The strange thing is that running iw command everything seems to be configurated in the right way:
root#localhost:~# iw dev mlan0 link
Connected to 56:0c:ff:37:1a:69 (on mlan0)
SSID: Obi_Lan_Kenobi
freq: 2412
RX: 32154 bytes (310 packets)
TX: 19436 bytes (128 packets)
signal: -38 dBm
rx bitrate: 1.0 MBit/s
tx bitrate: 72.2 MBit/s MCS 7 short GI
bss flags: short-preamble short-slot-time
dtim period: 2
beacon int: 100
I honestly can’t understand why.
Does anybody have a suggestion about that?
Does anyone have a working UBoot config for accessing an NVME drive from UBoot running on a Raspberry Pi CM4?
I've compiled everything and UBoot is detecting my NVME correctly:
pci_bind_bus_devices: bus 1/pci_0:0.0: found device 0, function 0: find ret=-19
pci_find_and_bind_driver: Searching for driver: vendor=2646, device=2263
pci_find_and_bind_driver: Match found: nvme
pci_auto_config_devices: start
pci_auto_config_devices: device nvme#0
PCI Autoconfig: BAR 0, Mem, size=0x4000, address=0xc0000000 bus_lower=0xc0004000
pci_auto_config_devices: done
but it doesnt call nvme_uclass_post_probe() and therefore it doesnt create any block device.
Running the command "nvme scan" from the UBoot command line i'am getting a timeout in nvme_submit_sync_cmd(). -> ETIMEDOUT.
I'am using a Kingston A2000 SDD with the latest firmware "S5Z42109".
Does anyone have an idea?
Thanks.
I have been recently trying to find out a way whether I can send serial data (large file like image data) only through the Rpi w 0's micro USB port using ttyGS0. But when I searched online I only found ways of setting up headless through serial and other stuff which was no what I wanted. But I did follow the tutorial half way
I went to '/boot/config.txt' and set 'dtoverlay=dwc2' at the end of the file after leaving a line
I went to '/boot/cmdline.txt' and did put 'modules-load=dwc2,g_serial' after 'rootwait' leaving a space
Thinking I could just use the /dev/ttyGS0 in my serial program on the Rpi and send the data the data was being sent but on my PC when I tried to access my Rpi which was on comport 12 it said port not found and couldn't open it. But it was showing up in the device manager as 'PI USB to Serial(COM12)'
Then I wondered whether it would be possible at all to access Rpi's com port this way.
If that's the case, I want to know if there is any other way to access the Rpi's USB port only using the USB cable
Note
I don't want to use Rpi's USB as a way of logging ie. 'headless setup'. I just want to receive serial data like an Arduino.
I don't want to use the GPIO pins (I tried) as they can only send limited characters at a time and I want to send an image file. Very quickly.
I don't have any serial converters at hand so i could route it to the arduino and use /dev/ttyUSB0
then read it on PC. I just only want to use the USB cable.
In case this info is required:-
my pc is a probook 6560b running windows 7
things i found while testing and stuff:-
I did do -lsusb command but i dint find my device on that list
I tried the 'ls /dev/ttyGS0' and i found '/dev/ttyGS0'
I checked many forums and some guys were asiking to use this command 'dmesg | grep tty'and show them the code . So i performed it i dont understand what alot in the piece of text means but if it would be helpfull i pasted it here:-
pi#aloypi:~ $ dmesg | grep tty
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:6D:50:77 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=tty1 root=PARTUUID=4ab8bcad-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_serial
[ 0.001496] printk: console [tty1] enabled
[ 2.543414] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[ 2.561791] 20215040.serial: ttyS0 at MMIO 0x20215040 (irq = 53, base_baud = 50000000) is a 16550
[ 6.716694] systemd[1]: Created slice system-getty.slice.
i also tried this one 'dmesg | grep dwc2' out of curiosity and got this but i cant say anything judging it so ya
pi#aloypi:~ $ dmesg | grep dwc2
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 snd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1366 bcm2708_fb.fbheight=768 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:6D:50:77 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=tty1 root=PARTUUID=4ab8bcad-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait modules-load=dwc2,g_serial
[ 2.379190] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.386185] dwc_otg: FIQ enabled
[ 2.386205] dwc_otg: NAK holdoff enabled
[ 2.386219] dwc_otg: FIQ split-transaction FSM enabled
[ 2.386245] Module dwc_common_port init
[ 2.968203] modules-load=dwc2,g_serial
[ 8.344134] dwc2 20980000.usb: supply vusb_d not found, using dummy regulator
[ 8.367130] dwc2 20980000.usb: supply vusb_a not found, using dummy regulator
[ 8.626751] dwc2 20980000.usb: EPs: 8, dedicated fifos, 4080 entries in SPRAM
[ 8.647109] dwc2 20980000.usb: DWC OTG Controller
[ 8.653810] dwc2 20980000.usb: new USB bus registered, assigned bus number 1
[ 8.726672] dwc2 20980000.usb: irq 33, io mem 0x20980000
[ 8.787097] usb usb1: Manufacturer: Linux 5.10.17+ dwc2_hsotg
[ 9.371395] dwc2 20980000.usb: bound driver g_serial
[ 194.158373] dwc2 20980000.usb: new device is high-speed
[ 194.189677] dwc2 20980000.usb: new device is high-speed
[ 194.225164] dwc2 20980000.usb: new address 3
Ok looks like i made some progress
till now I did this
I went to '/boot/config.txt' and set 'dtoverlay=dwc2' at the end of the file after leaving a line
I went to '/boot/cmdline.txt' and did put 'modules-load=dwc2,g_serial' after 'rootwait' leaving a space
I did this 'sudo nano /etc/rc.local' and placed 'modeprobe g_serial use_acm=0' before 'exit 0'
Then i performed this command 'sudo systemctl stop getty#ttyGS0.service'
and then this 'sudo systemctl disable getty#ttyGS0.service'
(i think disabling getty#ttyGS0.service and puting 'modeprobe g_serial use_acm=0' in the folder metioned above allowed rpi and pc to comunicate but then again i can be wrong )
then perfored a 'sudo reboot'
this seemed to solve my problem
but i have one more problem now
whatever is sent from the rpi i can only recieve in the coolterm serial port reading software
i cant seem to use read the port from processing for some reason
(im using processing to later read the image file being sent)
here is my current serial reading program in processing
import processing.serial.*;
Serial myPort; // Create object from Serial class
String val; // Data received from the serial port
void setup()
{
myPort = new Serial(this, "COM13", 115200);
}
void draw()
{
if ( myPort.available() > 0)
{ // If data is available,
val = myPort.readStringUntil('\n'); // read it and store it in val
}
if (val!=null)
{
println(val); //print it out in the console
}
}
i kinda am stuck here :P
EDIT
welp nevermind i solved it
i finally finally got it working yaaaaaaaayyy
OK now remember all who seek for the answer when using /dev/ttyGS0 it uses the CTS and RTS protocall
(now idk if it can be disabled but please lemme know you guys)
Its like the pi asks your pc wether it is cleared to send the data and when the pc says yeah ok send the data the pi sends it
so whenever your using this method please enable rts or cts
this is what i used in processing to recieve the data
import processing.serial.*;
Serial myPort;
void setup()
{
//remember to set the COM port to which your pi is set
size(200, 200);
myPort = new Serial(this, "COM13", 115200);
}
void draw()
{
if ( myPort.available() > 0)
{
if(myPort.getCTS()==true){
myPort.setRTS(true);
print(myPort.read());
}
}
}
i hope this is of loadsa help to you guys but if there is some correction needed please lemme know yall:D
thanks