here the image show my current problem I do my best to modify the path. the path of JAVA_HOME is right but I've been confuse because that is always show up even though that I already modified it .if I try to put the directory path of my SDK it's the same error.
image link:https://i.stack.imgur.com/LeipD.png
Change like this in your Environment Variables.
Following steps solved problem for me
Locate where your Android Studio is installed.
For me C:\Program Files\Android\Android Studio
Check if the jre folder exists, Create a new folder called jre
Copy the contents of the jbr folder and paste them into the jre folder.
Check by running flutter doctor, and Restart IDE.
Thanks: roufy235 {cause}
Related
Unable to run flutter from Android Studio not detecting flutter project its shows Error: Entry point isn't within the current project
Every time restart android studio same error message shows
Delete the .idea folder inside the root of the flutter project and restart Android Studio.
Refer to this question: What is the .idea folder? and make your decision if it's safe or not to delete .idea folder.
Click on File-> Project Structure -> Module then add root folder of
your project then it will detect its a flutter app and then build and
work
its work for me
Reference: https://github.com/flutter/flutter-intellij/issues/2307
1) make sure flutter and dart sdk paths are properly configured from
File-> Settings..->Languages and Frameworks
as well as make sure Dart support is enabled for project module from Dart Option
2) at the end select File->Invalid caches and restart
3) so after 2nd step you may get in File->Project Structure.. option from there Select Modules then just simply add only root folder path of your flutter project and repeat just above 2nd step
for me this worked
Syncing your project with gradle files will solve it:
You can sync the files with Gradle, within the File menu.
Else You can re-include the files/project root folder inside the File Menu.
File -> Project Structure -> Module
And then add the root folder of the project(with + icon), then it will detect that it's a flutter app again, and then build and work again.
Try delete .idea folder inside project folder and Invalidate & Restart Android Studio.
For me my project was missing the pubspec.yaml file, it was deleted by mistake , instead of warning about the missing file , I got this error
This problem happened to me
I solved it this way
Go to the Android Studio track
I have this way
C:\Users\mustafamaxL\.AndroidStudio4.0\system
Remove folder (caches)
Then, start Android Studio again
If your ios, android, or lib folders are missing, it typically means there is something wrong with your project structure.
To fix it, delete the .idea folder in the root of your project and then restart Android Studio. If you're using a Mac, you can display the hidden .idea folder by pressing Command+Shift+Dot in Finder.
The .idea folder will be automatically regenerated and everything should be back where it belongs.
See this post for the original solution.
Click Content Root Close Icon and Remove Android Folder.
Fix it to me.
I faced the same issue today and tried other solutions here but it wasn't worked at all.
In my case I deleted three folders that is android, ios, and .idea from project directory, then restarted android studio and finally I gave this command in Android Studio's Terminal.flutter create . to create appropriate directories (i.e., android & ios).
Now it is working fine.
Note: Before deleting the android / ios directory please make a backup of these directories only if you previously gave native code in android / ios directory.
Hope this solution will helpful if others will not work.
The .idea folder will also be deleted on Linux. When Andriod Studio opens, click terminal at the bottom in Android Studio. Then type remove -r .idea/ in the terminal and press enter. After deleting, close and restart Android Studio.
You might need to update the Gradle version. Or change the minimum android SDK version.
Here is worked for me:
Update Gradle / minSdkVersion version
Reopen the project but at the directory user/StudioProjects/yourFlutterApp/android.
After it is opened it will load some packages (see right bottom), which will take some time.
It will ask you to update the Gradle version (right-left corner) or go under File>Project Structure Project you can set a higher Gradle version and under Modules variables of your build
Now you can sync your project with Gradle files
After configuration, you might need to restart your project with File>Invalid Caches/Restart....
I have created 2 folders inside lib's folder for my *pages* and *widgets*.
Getting the main.dart file back to the **lib folder** will do the trick
I'm currently in Android Studio Electric Eel.
I've done all of the suggested solutions above, but nothing works.
Turns out the project is not detected as a Flutter project. So what I do to resolve this issue is to remove gradle-related files from the root folder:
build.gradle
gradlew
gradlew.bat
gradle/
How can I change the logo in Studio? I have been searching for the location of the files, but I cannot see them. Also I have been searching for the files in Studio self.
solution: in plugin directory unzip studio-x.x.zip change the files within the zip (also image/logo) and then zip the folder again. Restart the server and its changed.
I just downloaded Eclipse Juno onto my machine. I extracted the files to an Eclipse subdirectory in "C:\Program Files". When I try to launch eclipse from here, it works great! But I don't want to have to navigate to this directory every time I want to launch eclipse. I tried just moving the executable to my Desktop, but then when I try to run it I get this message:
The eclipse executable launcher was unable to locate its companion library.
How do I let eclipse know where it's companion library is if I don't plan to have them in the same folder? Please be very specific.
Thanks!
You dont move the executable to your desktop because the executable needs to be in the same directory with other files where it was. get it back and then make a shortcut or link to it. you are free to make the shortcut or link where you want.
Well i had the same problem sometime back, and i figured out that since i've changed the location of my elcipse.exe , it has some how effected the "eclipse.ini " file
1.Path to -startup
D:\ < elcipse folder> elcipse:\ plugins\org.eclipse.equinox.launcher_1.3.0.v20120522-1813.jar \this is the start up jar file.
2.Path to shared lucher library
D:\ < elcipse folder> elcipse:\ org.eclipse.equinox.launcher.win32.win32.x86_1.1.200.v20120522-1813 \this is the shared launcher library jar file.
just set the follwing two paths and ti will start up again like befor..
Happy coding..
This is a bug filed with Eclipse for Windows and Mac:
When attempting to launch Eclipse (double click on Eclipse.app), the launch fails. The only action is a dialog box with this message:' the eclipse executable launcher was unable to locate its companion shared library'. I found an online description of the problem and the workaround here:
Specifically, as per the instructions above:
I opened the Eclipse.app package, located eclipse.ini, edited it
searched the plugins folder for something matching org.eclipse.equinox.launcher.carbon.
copied the maching folder name (from plugins)
pasted it as the terminating portion of the path for --launcher.library
replaced the --launcher.library line with that path
https://bugs.eclipse.org/bugs/show_bug.cgi?id=288112
Eclipse Neon, 2017:
I copied my old .p2 folder found in my home.
Ran eclipse again and it worked.
It used to be that you could just copy eclipse as a zip and it would work fine, but it seems some plugins now rely on the .p2 folder.
When I run my BlackBerry project in Eclipse, I get the following error:
Error: Cannot run program "jar": CreateProcess error=2, The system cannot find the file specified
How is this caused and how can I solve it?
Finally I get the solution .copy the jar.exe from java bin folder and paste to the jre bin folder.
you can solve this problem by following setting
Right Click My Computer -> Select Properties-> Select AdvancedSystem Settings Tab -> Environment variables
Click on new button and Add
Variable Name : JAVA_HOME
Variable Value : C:\Program Files\Java\jdk1.7.0\
note jdk not jre
I tried several of the posted methods, the important step seemed to be setting the correct system path (the "Path" environmental variable) to have included a folder that pointed to the relevant jar.exe. The variable changed from X to X + ;C:\Program Files\Java\jdk1.7.0_03\bin; you need to make sure the jdk folder part is relevant to your version, which I overlooked.
The reason for my answer is to add the step I missed; which is to restart Eclipse! I tried running it a few times, but after closing and reopening it the project packaged correctly. It might not have been obvious to do this.
i think you need to set jarfile path.
From the BlackBerry Support Forums:
first thing is to check that the JDK is installed, and that the PATH
is set correctly. Open a command line window, and run the "jar"
command.
Set the Environment variable correctly (under path set till jdk->bin)
In your Eclipse Installed JREs make sure you are pointing till JDK folder and not JRE
The Solution is: Open My computer, right click > select properties > go to advanced > go to System environment variables > under PATH add this one:
c:/Program Files/Java/jdk1.7.0_03/bin
Close and reopen Eclipse and thats it...
NOTE: jdk1.7.0... is for the java version you have installed on your computer
This error comes because of Jdk1.7.
So try 1.6 and set path to bin folder.
It works for me...
I was developing an app for BB JDE 5.0 and I had the java JDK 1.7. I was going crazy because I tough everything was ok. Then I realize that for JDE 5.0 I needed JDK 1.6. Installed it from here Java SE Development Kit 6 Update 45 changed the environment path and my problem was solved!. :)
Adding C:\Program Files\Java\jdk1.8.0_131 to JAVA_HOME and C:\Program Files\Java\jdk1.8.0_131\bin to Path in System Variables within Environment Variables wasn't sufficient.
Turns out, you need to add those two variables and their respective values to both user and system variables within environment variables.
I added the following to BOTH User variables as well as System variables in Environment Variables:
Variable: JAVA_HOME
Value: C:\Program Files\Java\jdk1.8.0_131
Variable: Path
Value: C:\Program Files\Java\jdk1.8.0_131\bin
That worked for me !
This worked for me:
Project JDE 5.0
OS: Windows 8.1 x64
This PC > Properties > Advanced System Settings > Environment Variables:
Added the following:
Path: C:\Program Files (x86)\Java\jdk1.7.0_25\bin;C:\Program Files (x86)\Java\jdk1.7.0_17\bin;C:\Program Files (x86)\Java\jre7\bin
I know the above is similar but thought id post what worked for me anyway as it reinforces the above answers :)
NB to restart eclipse.
could not open C:\Program Files\Java\jre6\lib\i386\jvm.cfg
is the error coming when i am trying to start eclipse ide.
my C:\Program Files has
jdk1.6.0_14
jdk1.6.0_17
jre6
folders.
path is set to
PATH: C:\Program Files\Java\jdk1.6.0_17\bin
what is the problem
i have seen this link but it is not solving my problem
can't find JRE in the JDK
I had similar problem on a Windows machine. I had moved my Java directory from inside "Program Files" (the space in the directory name was giving me trouble) over to c:\
I set all my PATH variables to the new location, restarted the machine and thought that would be enough. Nope
java -- version
Error: could not open `C:\Program Files\Java\jre1.8.0_66\lib\i386\jvm.cfg
This solution came from the good folks over at coderanch
Start regedit (just type "regedit" into the Run program) and work your way down to HKEY_LOCAL_MACHINE > SOFTWARE > JavaSoft
There you will find several different java directories
Java Development Kit
Java Plug-in
Java Runtime Environment
Java Update
Java Web Start
In each directory you'll find different directories for the different version of java (esp. Java Web Start). Open each and every one and you'll see that your old path is still listed. Double click the Name (left column) of the listing and manually type in the new path.
Open a new terminal and type in Java - version and you should be fine.
This problem can show up if you initially install Java in the default location (C:\Program Files) and then later re-install into another location.
The default installation copies java.exe, javaw.exe and javaws.exe to C:\Windows\System32. If you are in this situation and delete these files it will likely solve your issue.
(Thanks to Jay: http://jaykhimani.blogspot.com/2012/09/error-could-not-open-cprogram.html)
Problem: Eclipse Neon error: "C:\Program Files\Java\jre1.8.0xx.xx\jvm.cfg"
Solution Win7 Pro: System Properties > Enviorment Variables > System Variables > Path > Edit > #make sure the current JAVA directory appears first in the path if more than 1 JAVA directory exist.
In the path that follows, I moved "C:\ProgramData\Oracle\Java\javapath" behind the current directory "C:\Program Files\Java\jdk\bin;C:\Program Files\Java\jre\bin" > save
Path
C:\Program Files\Java\jdk\bin;C:\Program Files\Java\jre\bin;C:\apache-maven-3.5.0\bin;C:\ProgramData\Oracle\Java\javapath
I also had this problem and was having trouble finding a solution, but now I did!
If you uninstall your current running jre version and then install higher one you are good to go.
I was using jre1.6 when I had this problem but after installing 1.7 it was solved!
I recently got the same problem on my Windows 7. The issue was that two different paths were specified for Java in the path environment variable. This can be checked as follows.
On the command prompt, run the following command:
> where java
C:\Program Files (x86)\Common Files\Oracle\Java\javapath\java.exe <br/>
C:\Program Files\Java\jdk1.8.0_192\bin\java.exe
The first one was the cause of the issue and removed it from the path.
Eclipse is working now without re-installation.
Note: The environment vars have been as follows always:
JAVA_HOME=C:\Program Files\Java\jdk1.8.0_192
JRE_HOME=C:\ProgramFiles\Java\jdk1.8.0_192\jre
The problem is that your eclipse cant find jre.Just copy and paste your jre folder into eclipse folder and then start eclipse.Delete environment variable.
What worked for me was to go back to the Java webpage and download the Java jre instead of the jdk, since that is what the stupid computer is now looking for. Then open the C: Program Files>Java and make sure you see jre7 instead of jdk.
RS
Have a simpler solution:
Check your PATH. Most likely it is referring to incorrect java.exe. This started happening to me when I installed OS patch. In process of checkpoint etc, PATH got modified. Once I corrected it (using Environment Variables...), it worked immediately.
Try putting below line in your eclipse/STS -STS.ini file
-vm
C:\Program Files\Java\jdk1.8.0_121(your JDK version)\bin\javaw.exe
Put it at the top of the file.
Most probably it will work.
Sometimes putting javaw.exe in eclipse folder also work (where eclipse.exe is there)
This is an old post, but what solved my solution was editing the `eclispe.ini' file to include the correct path to the JDK.
Building off of what Lars answered, I did reinstall Java, so that may have been the source of the issue. Reglardless, this is the solution that worked for me. I did not have to delete any files from C:\windows\system32, however. I merely told eclipse to look in the new Java installation directory.
These docs indicated I needed to specify the path to the VM:
-vm
C:\Java\jdk1.7.0_25\bin\javaw.exe
This problem mainly occurs when we install new jre or jre gets updated automatically since jdk version and jre version are different and path variable i.e. JAVA_HOME contains jdk path with version included in it . Eclipse might be using that to generate the jre path name for the said file.
I did workaround i.e. changed name of jre folder to the older version e.g.
jre1.8.0_191 is after installing update and
jre1.8.0_60 was before update.
I renamed jre1.8.0_191 with jre1.8.0_60 to solve the issue
I had faced similar problem. Environment variable path problem
JAVA_HOME=C:\Program Files\Java\jdk1.8.0_192
Set the Environment variable after going
Control Panel\All Control Panel Items\System and select Advanced System Settings then set Environment Variables
In System Variables add a new variable JAVA_HOME and variable value = C:\Program Files\Java\jdk1.8.0_192, the path of the jdk file in your system.
and %JAVA_HOME%\bin in the path of the system variables.
Hopefully the problem will solve.
After doing this It works fine for me.