I'm new to learning flutter when I try to crate a new project on android studio gives me a arror message in the event section enter image description here
The MESSAGE: [Could not find an option named "platforms". Run 'flutter -h' (or 'flutter -h') for available flutter commands and options.]
And another problem is flutter doctor does not see the android studio enter image description here
1(By the way, I want to use this version of flutter, please do not give a suggestion like update.)
2(this problem did not exist before, it happened after turning my computer off and on)
And sorry for my english mistakes
Thank you.
flutter version flutter_windows_v1.12.13+hotfix.9-stable
andorid studio version: 4.1.3
Is this the answer to your question about andorid studio?
and you need to install JDK
You are using the wrong flutter SDK. Too low information in your question. Make sure that you have the right path to flutter SDK in your IDE. Check that the flutter SDK directory has the appropriate structure, all needed files and cetera. Channel and version of flutter also may have an influence on this problem.
Got this today out of nowhere. Things were going well, but suddenly when I tried to relaunch the app from fresh, for the error Could not find an option named "target"
UPDATE:
This appears to happen when I switch branches and merge while app is running/flutter is attached. If you're using VS Code,
open your launch.json
change something, I decided to change type: "dart" to type: "notdart"
save
try to debug which fails
then revert that change.
This should fix the issue.
Previous Answer/If you're not using VS Code
What worked for me was to
flutter clean
close the editor (VS Code for me)
close the emulator
give a minute for things to close down
open task manager and kill any left over processes of dart.exe flutter.exe and java.exe and adb.exe (was doing Android)
start VS Code/Android Studio and try to debug again. (when prompted I chose to cold boot the emulator as well)
This takes a while as the emulator has to cold boot and since flutter clean was run, the compilation hadto start from scratch as well.
I was trying to continue my Flutter learning and just tried to open the project. I opened the android studio, it showed me the project that I had opened the last time. Then I proceed to File->Open to open the project I specifically used for learning (let's call it L). But then android studio was stuck on open file dialog box (shown in screenshot).
screenshot
It just stuck there for more than 10 minutes, until I decided that there is something wrong and hit the cancel button. I can still access my project using File->Open Recent, though.
Questions are, what caused it? What can I do to fix it?
I've tried:
Uninstalling android studio and reinstalling it
Running disk defragment (I don't know if it is relevant. I thought that maybe something in my drive caused it)
Somehow I was able to made it past the loading when I do the following:
Open Java Project from Open Recent
Let the gradle build run, wait until gradle finish downloading files
Click File->Open
But when I came back to L from Open Recent and go to open file menu, it stuck again
I also tried googling "android studio stuck on open project screen" or "android studio cannot open file" but there's nothing I can use there
Additional Information
Android Studio Version 4.1
Flutter version 1.20.3
Dart SDK version 2.9.2
Please help
I just tried to execute Flutter: New Project, but it shows an error that could not find a flutter SDK.
I've ensured to complete all of the requirements from the flutter doctor.
Is there any way to solve this problem?
Thanks.
On macOS this was solved by following these steps.
First find where you downloaded the flutter sdk (Can be downloaded from here). It should be in your downloads folder unless you selected somewhere else.
Next:
Open up Terminal. Run the following command: sudo nano /etc/paths
Enter your password, when prompted.
Go to the bottom of the file, and enter the path you wish to add.
Hit control-x to quit.
Enter “Y” to save the modified buffer.
If the sdk is downloaded into your Downloads folder, your path to add should be /Users/yourusername/Downloads/flutter/bin
Lastly, quit and restart your terminal windows and VS Code. After restarting, both apps should recognize flutter and running flutter doctor should now work.
If you installed Flutter extension please restart VS_CODE and try it again. I already had the same problem.
The thing is VSCode looks for .packages file in your Flutter project this file contains path to your Flutter SDK & some other metadata. You're getting this error because either the .packages file is missing or either the path to Flutter SDK in .packages file contains some discrepancies.
To resolve it, you can;
Either edit the .packages file & set the path.
Or if you already have a working Flutter project then a .packages must've been already created. Copy that file & paste it in the root directory of your project.
Restart VSCode & run flutter pub get
This should resolve the issue.
Check your environment variables:
Look for the PATH if it exists append the full path to flutter\bin
using ; as a separator from existing values.
If it does not exist, create a new user variable named PATH with the
full path to flutter\bin as its value.
And check the installation guide
After doing this:
Open VS Code.
Press Ctrl + Shift + P.
Then type flutter and select run flutter doctor it should be fixed now.
Create a new project to make sure it's run.
For Linux Users
For future visitors :)
I had the same problem, in my Terminal flutter doctor or in general flutter was recognized, but VSCode couldn't recognize my SDK location so flutter doctor for instance didn't work.
The first thing to do is to follow the steps in flutter documentation: Flutter Doc
If it didn't work, change the environment variables directly.
sudo nano /etc/environment
Now add the location of the bin folder of your flutter SDK, The folder that you downloaded from here.
For example, you extracted it here: /Home/User/Software
Add /Home/User/Software/flutter/bin to the PATH variable. Paths are separated by a colon(:)
After a few solutions I tried, this one worked.
For Windows
Open Visual Studio Code
Click Locate SDK
Find your flutter folder
Click Save
Re-open your Visual Studio Code
Press Ctrl + Shift + P
Type flutter and choose Flutter: New Application Project
Type your project name (e.g: flutter_application_1)
Select a folder to create the project in
If you want to change your flutter sdk location
Go to Visual Studio Code > Manage > Setting (or with shortcut Ctrl
Search dart
Find [dart] configure setting to be overriden for [dart] language
Click Edit in settings.json
You'll see :
{
"dart.sdkPath": "C:\\tools\\dart-sdk",
"dart.flutterSdkPath": "C:\\tools\\flutter",
"[dart]": {
"editor.tabSize": 2,
"editor.insertSpaces": true,
"editor.detectIndentation": false,
"editor.suggest.insertMode": "replace"
}
}
Replace dart.sdkPath and dart.flutterSdkPath with your new sdk location
Installing Flutter on Linux is a breeze using snapd as is documented officially. But then trying to create a Flutter project by following the official steps as mentioned here - Test drive - Flutter will throw an error similar to the description provided in the question.
On a side note though, you don't have to bother adding Flutter to PATH if it was installed using snapd.
Rather, follow these steps:
flutter create <insert_app_folder_name>
cd <insert_app_folder_name>
code .
What it really does is:
The Flutter binary is called from within snapd & creates a project with a directory name you provide.
You can now cd into that specific directory.
Call VSCode in the current directory which opens a VSCode instance within the project directory.
Refer to the answer by #maheshmnj about the .package. This file was created by Flutter earlier if you followed the aforementioned steps.
This means the Flutter extension couldn't find the Flutter SDK automatically (eg. by looking in your PATH or a path configured with dart.flutterSdkPath). Clicking Locate SDK should let you browse to the SDK manually and record that location for the next time. If you see this again after restarting, that's definitely a bug in the Dart/Flutter extension, so please open an issue at https://github.com/Dart-Code/Dart-Code and include the output from clicking the Show Log button, as well as noting whether there's a dart.flutterSdkPath setting in your VS Code User Settings.
If you have just installed the flutter extension, close all the vs code applications running and restart the vs code then it will work as expected.
In order to run a new flutter project,
Go to vs code-> View tab -> command pallette -> select Flutter ->
give a name to the project ->give the path of the project
Now you are good to go with flutter.
I would like to complete NoobN3rd information.
In VSCode Linux I used this steps:
sudo nano /etc/environment
Type your password
I added 3 paths at the end of line:
3.1 /"flutter instalation directory"/flutter/bin
3.2 /"flutter instalation directory"/flutter/packages
3.3 /"flutter instalation directory"/flutter/dev
Save it and reboot your system
Look at my environment file to have an example:
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/home/paulo/development/flutter/bin:/home/paulo/development/flutter/packages:/home/paulo/development/flutter/dev"
if youknow where have you extracted your zip file of dart(Eg. at the time of extraction i setup the path C:\src\flutter)
then in vs code goto
c drive
-src
-flutter
-bin
-cache
-(dart-sdk)
select this folder and your
vs code will be adjusted.
I was facing the same problem. I've initially followed all the steps provided by installation guide of Flutter and was able to run an existing project using flutter run command.
So I've tried again repeating the very same steps of the installation guide and changed the path that I initially set like:
export PATH="$PATH:~/path/to/flutter/bin"
For one like:
export PATH="$PATH:/home/user/path/to/flutter/bin"
Then I run source ~/.bashrc and restarted Visual Code and worked! so I suppose that it was something related to ~ in the path.
I would like to add a complementary and alternative response to the Linux solutions given by NoobN3rd, Traufvihal and Paulo Ravaiano.
I'm using Manjaro and for some reason my Visual Studio Code was not picking up all the environment variables definition. I tried all the solutions and finally I realised the problem was not with the variables definition (my final solution contains them all in ~/.bashrc but it should work with /etc/environment as well) but on how Visual Studio Code was launched.
In case someone else is facing this problem, I noticed that running VS Code from the applications menu fails to link the environment variables for some reason. On the other hand, launching "code-oss" from the terminal does the trick and picks all my variables defined in my ~/.bashrc file.
Hope it helps!
I just got out of the same trouble, after numerous hit and trials trying to run flutter commands from vs code terminal the below set of steps got the things up for me.
In Ubuntu 18.04
Grab the path of the directory where flutter was unpacked by you.Mine was in the Home directory for the root user. Location can be any of your choice.
Go to the Home for your root user
Un-hide all of the hidden files in this directory.
Look for .bashrc file. Do not look for .profile file.
Open .bashrc file using nano/vim/text editor which ever you like.
Scroll to the bottom of the file and add this line -
export PATH="$PATH:pwd/flutter_linux/flutter/bin"
Quit all instances of the vscode (if any) opened.
Re-open and in the terminal type which flutter
Here -
I had re-named the un-zipped folder name like "flutter_linux_v1.12.13+hotfix.9-stable" with "flutter_linux"
Hope this helps......
i was also facing this error, after putting the flutter sdk path at the End of the PATH variable(not in middle or start) it works fine for me
For those who want to change their Flutter SDK path for the Dart & Flutter plugin
Click on Manage Icon(on Mac)
Click on Settings
On the Settings page, Click on Dart & Flutter.
Look for Dart: Sdk Path, click on Edit in settings.json
Edit dart.flutterSdkPath to your VSCode Flutter path
For me non of the answers helped.
What helped was (on macOS) opening the .bash_profile file via
sudo nano .bash_profile
and change the path to where my Flutter was as this has changed. Or add this line export PATH="$PATH:/home/user/path/to/flutter/bin"
hope this helpes.
QUICK SOLUTION!: If on macOS, PLUS everything had been working flawlessly previously, and this happens all of a sudden, or periodically, here is what I eventually discovered...
If your mac restarted, either on its own due to a crash, freeze or overnight install of updates, and VS Code was running, it generally restores all your vscode instances, but with various environment-related errors such as this one. The reason is that you are not running in the context of a shell and you don't have access to those environment settings. See this article from the VS Code documentation.
THE SOLUTION?: Quit and restart VS code as you normally would. Others have mentioned this, but I thought it would be good to know why this happens so you aren't surprised next time.
Please refer to the Get Flutter SDK section and locate where you have installed your flutter\bin folder. In my case, I put the flutter bin in my Documents folder.
See the following image Flutter\bin location
Windows
After make sure right Flutter version is in your path: https://docs.flutter.dev/get-started/install/windows
and you can run flutter doctor successfully
in VS Code you need to go to File->Preferences->Settings (or Ctrl+,)
then search for dart.flutterSdkPath then click on "Edit in settings.json" make sure it is the right path there.
I had the same problem, the solution was:
take the folder where you have extracted your zip file (for example: C:\src\flutter\flutter) then put it in the environment variable path and restart vscode.
I ported an android project from Eclipse to Android Studio. The project builds just fine. However I am not able to see any layout preview. When I go to the Design tab of a layout I get a
Loading Configuration...
message that never goes away (see image).
I have set correctly the Android SDK in the project structure.
This happens with all the xml files and I am not able to open the "Preview" window from
View -> Tool Windows -> Preview
I tried creating a new project and everything was showing fine. Am I missing something? Anyone faced a similar issue? Is there a chance that this is happening because the folder structure is not the default one? (The layouts are not under project/src/main/res/layout but under project/res/layout)
Try this
Build> Clean Project
Build> Rebuild Project
It worked for me
Just do a right click on the layout preview and click on
Show Included in contentmain.xml
you can see it in the following image
I had the same problem and I solved as follow
Update all build.gradle files with:
classpath 'com.android.tools.build:gradle:0.5.+'
Now android studio 0.2.+ uses gradle 0.5
Closes de IDE and via Terminal/Console
Do a clean: $gradle clean
Do a build: $gradle build
Assemble it: $gradle assembleDebug
Open the Android Studio and be happy ;)
Close android studio and go to path as follow:
C:\Users\user\ .AndroidStudio1.2\restart
There is a file named restarter,double click on it and open android studio again,create a new project and enjoy it
Maybe it is better to use the 0.3.6 version (latest), with this version of gradle : com.android.tools.build:gradle:0.6.+
Bear in mind that Android Studio will be expecting the Android SDK already installed (as I suppose you have), and also the environment variables ANDROID_HOME and GRADLE_HOME.
Try updating your API to the latest version in the SDK manager ---- worked for me
I had the same problem Follow this step :
First uninstall old android studio and delete .androidstudio file from C:\Users\yourpcname
update api to latest version in SDK manager.
Install Latest Android Studio Canary Build: 2.0 Preview 9
Done
In Android Studio
File>Invalidate Caches/Restart
that's how i fixed
You can try :
Select Preview window(Focus on it)
Unselect Floating mode and Pinned mode
goto Window -> Active Tool Window ->
Unselect Floating mode and Pinned mode
Now you can see Docked window option here(Window -> Active Tool Window ->)
Select Docked Window