I am trying to visualize real-time data on a chart. My goal is to set a value that is considered normal (37°C for body temperature, for example) and personalize the real-time data curve according to this value. As the real-time value gets higher than the normal value, I want it to adapt its includeArea color. Here is what I want:
And here is what I could obtain so far:
I am using the Charts Flutter. includeArea is drawing the area skirt representing the data, down to the domain axis. That is why, the coloring which was supposed to be until the 37°C is going further until the domain axis (x-axis).
Any thoughts about how I can obtain what I want, please?
Thank you very much.
Related
I just wanna ask if it is possible to make a pie chart but in another shape.
An example would be say there were two candidates who ran for governor in a state. I would want to show the results in a chart. I want the shape of the chart to resemble the shape of the geographical location of the state.
I did some digging and this is the only one that showed up which may help me(but not really) https://forums.adobe.com/thread/988130
As your adobe thread implies there are (at least) three issues to consider:
1) you want to show the votes each candidate received as a portion of the area of the state. If your state is nearly square, you could overlay a grid and assign each candidate a number of grid cells according to the votes they received. If the grid cells are county or precinct outlines that works even better, but this isn't a pie chart because a pie chart uses a polar coordinate system.
2) if you really must have a pie chart which is polar, consider that the average viewer may not be able to visually integrate the areas to get meaningful results. Further you will have to integrate the area swept out by the sectors of the pie like a radar screen, and this contour integration is made more difficult by the fact that you must do it numerically. This means you must sample the boundary distance as a function of angular displacement from some center of gravity you have chosen, like the state capitol. But depending on the location of the state capitol, your visual could become even more distorted. Idaho comes to mind.
3) a good compromise might be just to overlay a pie chart on top of a silhouette or map outline of the state with appropriate drop shadows and emphasis to make the pie chart pop as well as the state outline. it would certainly be much quicker as well as much more readable.
I was visualizing my vorticity vector field and notice that I am not able to see the pattern without zooming in as there are too many glyphs and are too packed.
Currently, I am using a calculator to combine X,Y,Z vorticity field into a single vector field using the calculator. Take a slice of it and do a glyph filter visualizing all points on the plane.
I notice that one possible way is to visualize a curved glyphs and scale up a little bit to make it more noticeable, but not sure how to do that. Does anyone know whats the steps to do that? Or any other suggestions?
TIA
Have you tried reducing the Maximum Number of Sample Points property in the Properties Panel when the Glyph filter is selected in the Pipeline Browser? You may also want to change the Scale Factor property to change the length of the glyphs.
I am using Rickshaw (based on d3.js) to plot stacked bar charts. The problem is that the first bar is usually way more higher than the others, ruining the visual feedback.
Using logarithmic scale is (I guess) not an option here, because then the proportions between stacks in a bar will get broken. I wanted to introduce a horizontal break like in following image:
However, I cannot find any out-of-the box feature of Rickshaw or d3.js to do something like this. Any suggestions on how to make one?
This would require quite a bit of additional work. Here's an outline of what you would have to do.
Create two scales, one for the lower part and one for the upper. Set domains and ranges accordingly.
Pass values to the lower scale, capping them at the maximum domain value such that bars that are longer will reach the maximum.
Pass values to the upper scale, filtering those that are lower than the minimum.
You basically need to create two graphs that are aligned with each other to give the impression that there's just one. If you keep that in mind, doing it shouldn't be too difficult.
Here's a quick and dirty proof of concept that uses the linear scale's .clamp(true) to prevent the bars from becoming too long for values outside the domain.
The d3fc-discontinuous-scale component adapts any other scale (for example a d3 linear scale) and adding the concept of discontinuities. These discontinuities are determined via a 'discontinuity provider', which can be used to create one or more 'gaps' in a scale.
For example, to remove a range, you can construct a scale as follows:
var scale = scaleDiscontinuous(scaleLinear())
.discontinuityProvider(discontinuityRange([50, 75]))
Here is a complete example that shows how to use this to create a 'break' in a scale in order to render values that have large gaps in their overall range.
https://bl.ocks.org/ColinEberhardt/b60919a17c0b14d745c881f48effe681
I want to show a line chart, each point in the line chart will refer to a user. So whomever looks at the chart understands who the user is, I'd like each point to have a picture of the user and the user's name. Does anyone know any API that will let me do that?
I was looking at googles line chart (http://code.google.com/apis/chart/interactive/docs/gallery/linechart.html) but I cannot see anyway for me to have each data point represented as an image.
Using Java and JavaFX, you can build a StackPane where you can put two charts (one above other), where the back is a LineChart and the front is a ScatterChart. In this case, these charts will share the same X axis and Y axis, and on ScatterChart you can personalize the points with a picture.
Look:
How to personalize a chart style using Javafx and
How to produce an application with more than one chart in a StackPane
I hope this helps you.
It seems counter intuitive to have different points on the same line of a line graph represent different users.
(Line graphs) show in a linear form one or more variables that fluctuate over a period of time.
I believe if there is more than one variable that would mean there would be more than one line, so it is hard to make suggestions without more information about your specific application. With the currently available data I would recommend amcharts's Column chart with images on top:
I want to use core-plot for drawing line graph dynamically. data won't come at a time, we will be receiving point by point dynamically.
Is it possible to draw the chart dynamically using core-plot i.e drawing point by point as on when we receive the (x,y) point?
Please help me, Thanks.
Yes, you can do this reasonably easily. For each received data point, append it to an array of values to display. As these data points come in, call -reloadData on the Core Plot graph (or just the particular plot) to redraw the graph, passing in the array you just added a value to in response to the -numbersForPlot:field:recordIndexRange: delegate method.
If you need to adjust the plot range to track your data points (for a moving ticker), recalculate the new CPPlotRange for the X axis and set the plot space's xRange property to that.
Use the CPTestApp-iPhone, AAPLot, or StockPlot examples as templates for how to set up the line chart overall, and modify from that starting point.
I do something similar to this on the Mac in a scientific application:
(source: sunsetlakesoftware.com)
Sounds like you could make use of a demo project I put together and wrote about here (not core plot related though).
It draws a EKG graph but should easily be modified to use another input than the repeated "heart beat"...See line 320 in EAGLView.m where the indata is entered into the array.