As I mentioned on the title, I would like to create an organization on Hyperledger Grid, basically I'm running on Splinter not a sawtooth,
So after fllowing the commands on the tutorial I'm just wanna test, I faced this error:
"error: Found argument '123 main street' which wasn't expected, or isn't valid in this context"
That takes the adress '123 main street' as an argument and it's wasn't expected.
I tried to follow the structure on the --help, But I got the same Error.
Error: https://j.top4top.io/p_2280sldhn1.png
Running docker on splinter: https://l.top4top.io/p_2280khj412.png
I just followed the guide of the tutorial here on this link: https://grid.hyperledger.org/docs/0.1/creating_organizations.html#display-organizations-and-agents
there are a couple of things:
firstly, the link that you posted is for version 0.1, while there is 0.3 now out.
https://grid.hyperledger.org/docs/0.3/using_pike.html
if you scroll to about have that page that I have mentioned, there is the instruction for creating an organisation, and you will see that it is slightly different. I have hit that wall myself.
In short, first create your org without any details, and then you can update that org with anything you need, like address, etc...
grid organization create myorg MyOrganization
and then you can update it so:
grid organization update myorg MyOrganization --locations 'somewhere street 123, NY'
I hope this helps
Related
I have installed nominatim 4.1.0 (tokenizer= ICU) via following instructions on nominatim documentation, added wikipedia data during the installation, and imported an updated pbf file from geofabrik.de.
All works but when I sent some kind of request (e.g. Cagliari via Roma) the answer I get from Nominatim Website (https://nominatim.openstreetmap.org/) and my local installation are very different. The right results are on nominatim website of course.
The problems seems to be with the search candidate algorithm or the attribuition/calc of AdressImportance parameter.
The very strange thing is that I get these wrong results only for some requests.
There is any particular parameter to set or anything else to verify?
I hope it is clear for you and even small advice or comment would be very helpful for me
Thanks
Michele
After a discussion with the maintainers (https://github.com/osm-search/Nominatim/discussions/2839), I found an acceptable solution by editing the Geocode.php file line as follows:
$this->iLimit = $iLimit + max($iLimit, 150)
the result is not exactly the same as that of the online version but it works fine for me
I have a DialogFlow agent I am trying to test on Google Assistant. I've created a relatively simple Intent called "Set name" with the following Training phrases:
My name is Ryan.
Bill
I'm Steve
The name's Bond. James Bond.
It has two parameters:
Required: given-name with the Entity #sys.given-name and the value stored as $given-name
last-name with the Entity #sys.last-name and the value $last-name
I'm able to test in just fine in the DialogFlow test console. But when I try to "See how it works in Google Assistant." I get the following error:
Request contains an invalid argument. The query pattern 'The name's
Bond. $SchemaOrg_Person:given-name $SchemaOrg_Person:last-name.'
contains an undefined parameter 'last-name.'
If I delete the "James Bond" training phrase, it works okay. But I would like to include that. What am I doing wrong?
Here is a screenshot of the intent that is causing the problem:
Here is the link I'm clicking to try in Google Assistant:
And finally, here is the error message that appears in the bottom-right corner of the screen when I click that link:
I suddenly got a few of these error messages when both clicking the "See how it works in Google Assistant" link and submitting the app for production.
It seems like characters like apostrophes and hyphens in the training phrases creates trouble and can give that error message.
In addition it complained about a variant of the training phrases that I could not find anywhere no matter how much I looked at all languages, all pages of the phrases and all intents. I finally found the phrase in question by exporting the project and searching through the JSON files. Then I could delete the phrase locally, delete the intent in Dialogflow and do an import back to Dialogflow. (From my understanding it had messed up a follow-up intent which it also in the JSON (nowhere in the UI) had attached parts of some training phrases.)
Try to remove the dot from the sentence. So it will be:
"The name's Bond. James Bond"
I ran into same error and finally it was found to be an issue with the additional language I have added.
There was default "en" language and "en-IN" added by me. The issue was with training phrases in "en-IN" language. I didn't need it so removed it and it worked fine.
So, do check how many languages are enabled in your agent and whether training phrases are set properly for them or not.
I have an issue with VSTS manual test cases. When I try to edit one, I got an error message as follows:
An element with the same key already exists in the dictionary
e</n.prototype.add#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:3:2142
ki</n.prototype.onAddParameterInSteps#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:46195
bi</n.prototype.onAddParameterInSteps#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:40049
tf</t.prototype.onAddParameterInSteps#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:62452
bi</n.prototype._updateParametersRefCountOnAddingStep/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:39659
.each#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:12291
bi</n.prototype._updateParametersRefCountOnAddingStep#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:39614
bi</n.prototype._calculateParameterRefCountsFromSteps#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:40691
bi</n.prototype.setParameters#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-view-1316919717-vxhr2NM2m2AZNsRLuD0JDHQ==:36:35794
yt</t.prototype.readParameters#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async135478241-v-UPjjKxU6f1kHHOWlhqz1Q==:14:58274
yt</t.prototype._onStepsLoaded#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async135478241-v-UPjjKxU6f1kHHOWlhqz1Q==:14:72430
o/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:53:215
u#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async135478241-v-UPjjKxU6f1kHHOWlhqz1Q==:14:81038
yt</t.prototype._fetch#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async135478241-v-UPjjKxU6f1kHHOWlhqz1Q==:14:81408
yt</t.prototype.invalidate#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async135478241-v-UPjjKxU6f1kHHOWlhqz1Q==:14:57579
c</n.prototype._onFieldChanged#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-async636480634-vHvWOSM8E8rCxBa3bYo2R7w==:149:2040
o/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:53:215
u#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:94:177
o</n.prototype.invokeHandlers#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:94:526
tr</n.prototype.fireEvent#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:100720
tr</n.prototype.fireFieldChange#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:103810
tr</n.prototype.evaluateFields#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:112953
tr</n.prototype.evaluate#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:112662
tr</n.prototype._takeUpdateResult#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:110218
vi</t.prototype._beginSaveWorkItemsInternal/</</<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:74066
vi</t.prototype.beginGetWorkItemTypeExtensions#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:69585
vi</t.prototype._beginSaveWorkItemsInternal/</<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:74001
.each#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:12291
vi</t.prototype._beginSaveWorkItemsInternal/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-area-1319062352-vWRYJ179SKTshLwEQt_Tl9g==:35:73876
rt#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:59:938
l/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-common-1174969321-vP7TYoPIwwgcmodAk6tzLZw==:59:1252
i.Callbacks/l#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:35816
i.Callbacks/s.fireWith#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:36641
w#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:73448
.send/t/<#https://xxx.visualstudio.com/_public/_Bundling/Content?bundle=vss-bundle-basejs-1370396394-vpQOf5w8kp8_6mpJi9ABtBQ==:15:79367
Session Id: 73288d72-580f-42fb-9aeb-f5cadb6b3bc5
I only have this issue if a test step contains parameters. After refreshing the page and reopening the test case, the color code is black and it doesn't display the Save button. Also, the dropdown of the ... is empty.
Existing tests are fine, running them is also possible. Working with bugs, user stories and tasks is fine.
Screenshots can be found here
Is there a way to workaround this?
This is caused by the parameter name "#length", remove it or rename it to others like "#length1" would works.
This seems to be a bug with VSTS, I have help you created a feedback on MS Connect Page, refer to this link for details: "An element with the same key already exists in the dictionary" error occurs when save a test case contains a parameter named as "length".
Hi I'm using a Confluence macro called 'PockketQuery'(PQ). I have connected to a server located at my client's base through PostgreSQL. I run PQ to fetch results from the db into my confluence page. However, it's fecthing an extra unwanted word "Hallo" along with every result. I m unable to figure out where this string maybe coming from and getting attached to my results like this. Please help me get rid of it.
For example I run a PQ on the db which is supposed to fetch me result "Jack London", so the result that I see is "hallo Jack London".
Note: I use VPN to connect to my client's server and Confluence.
Are you using the latest version from the Marketplace 1.14.6? This issue shouldn't exist in the latest version.
I got an upgrade to version 1.14.6 of Confluence's PocketQuery macro. The issue that I had is resolved, the unwanted string in the result is there no more. The bad part is they don't mention it anywhere on the macro's bug fixes. There are no release notes attached to this fix.Thank you Felix for your help.
So we're trying to set up replicated repositories using PlasticSCM, one in the US, and one in Australia and running into a bit of a snag.
The US configuration is Active Directory, the AU configuration is User/Password. This in itself is not a big deal, I've already set up the SID translation table.
The problem is with plasticscm's replicate command itself. This is the command which should replicate from the US to AU, run ON the AU server.
cm replicate br:/main#rep:default#repserver:US:8084 rep:myrep#repserver:AU:9090 --trmode=name --trtable=trans.txt --authdata=ActiveDirectory:192.168.1.3:389:john.doe#factory.com:fPBea2rPsQaagEW3pKNveA==:dc=factory,dc=com
The part I'm stuck at is the authdata part (the above is an EXAMPLE only). How can I generate the obscured password? I think it's the only thing preventing these two repositories from talking to each other.
Ok, I've solved my own problem.
To get that "authdata" string, you need to configure your client to how you need to authenticate.
Then navigate to c:[users directory][username]\Local Settings\Application Data\plastic.
Pick up the client.conf and extract the string from the SecurityConfig element in the XML.
Check the new GUI here. It's a little bit easier.