I create a table user(_key(user_id,type),user_id(int),type(string),name(string), and had row,(1,"2","Scott") , then I update the row values to (2,"2","admin").and then delete the row delete from user where user_id = 2 and type = "2",sql scripts executed successfully, but select * from user again, the row still there ,ignite version number 2.9.1.anybody has the issue.
Ignite doesn't support a primary key modification. As result, you're not able to change the "user_id" value since it's a part of the PK. As a workaround, you can remove the existing row and insert a new one with the updated value.
Related
How to delete the attributes value of a table in oracle 10g using sql command?
Example of problem like: Delete the email_id of employee James.-> I tried this code
DELETE FROM EMPLOYEE01 WHERE MAIL_ID= 'james#gmail.com'
but after run output showed me that entire row was deleted but I want only email id delete from particular row.
If you only want to update a row, use UPDATE:
UPDATE EMPLOYEE01
SET MAIL_ID = NULL
WHERE MAIL_ID = 'james#gmail.com'
Here, SET MAIL_ID = NULL will remove the value from MAIL_ID field for the record identified by the WHERE clause.
I have a table test_123 with the column as:
int_1 (int),
datetime_1 (datetime),
tinyint_1 (tinyint),
datetime_2 (datetime)
So when column datetime_1 is updated and the value at column tinyint_1 = 1 that time i have to update my column datetime_2 with column value of datetime_1
I have created the below trigger for this.. but with my trigger it is updating all datetime2 column values with datetime_1 column when tinyint_1 = 1 .. but i just want to update that particular row where datetime_1 value has updated( i mean changed)..
Below is the trigger..
CREATE TRIGGER test_trigger_upd
ON test_123
FOR UPDATE
AS
FOR EACH STATEMENT
IF UPDATE(datetime_1)
BEGIN
UPDATE test_123
SET test_123.datetime_2 = inserted.datetime_1
WHERE test_123.tinyint_1 = 1
END
ROW-level triggers are not supported in ASE. There are only after-statement triggers.
As commented earlier, the problem you're facing is that you need to be able to link the rows in the 'inserted' pseudo-table to the base table itself. You can only do that if there is a key -- meaning: a column that uniquely identifies a row, or a combination of columns that does so. Without that, you simply cannot identify the row that needs to be updated, since there may be multiple rows with identical column values if uniqueness is not guaranteed.
(and on a side note: not having a key in a table is bad design practice -- and this problem is one of the many reasons why).
A simple solution is to add an identity column to the table, e.g.
ALTER TABLE test_123 ADD idcol INT IDENTITY NOT NULL
You can then add a predicate 'test_123.idcol = inserted.idcol' to the trigger join.
I am getting a duplicate key error, DB2 SQL Error: SQLCODE=-803, SQLSTATE=23505, when I try to INSERT records. The primary key is one column, INTEGER 4, Generated, and it is the first column.
the insert looks like this: INSERT INTO SCHEMA.TABLE1 values (DEFAULT, ?, ?, ...)
It's my understanding that using the value DEFAULT will just let DB2 auto-generate the key at the time of insert, which is what I want. This works most of the time, but sometimes/randomly I get the duplicate key error. Thoughts?
More specifically, I'm running against DB2 9.7.0.3, using Scriptella to copy a bunch of records from one database to another. Sometimes I can process a bunch with no problems, other times I'll get the error right away, other times after 2 records, or 20 records, or 30 records, etc. Does not seem to be a pattern, nor is it the same record every time. If I change the data to copy 1 record instead of a bunch, sometimes I'll get the error one time, then it's fine the next time.
I thought maybe some other process was inserting records during my batch program, and creating keys at the same time. However, the tables I'm copying TO should not have any other users/processes trying to INSERT records during this same time frame, although there could be READS happening.
Edit: adding create info:
Create table SCHEMA.TABLE1 (
SYSTEM_USER_KEY INTEGER NOT NULL
generated by default as identity (start with 1 increment by 1 cache 20),
COL2...,
)
alter table SCHEMA.TABLE1
add constraint SYSTEM_USER_SYSTEM_USER_KEY_IDX
Primary Key (SYSTEM_USER_KEY);
You most likely have records in your table with IDs that are bigger then the next value in your identity sequence. To find out what the current value your sequence is about at, run the following query.
select s.nextcachefirstvalue-s.cache, s.nextcachefirstvalue-s.increment
from syscat.COLIDENTATTRIBUTES as a inner join syscat.sequences as s on a.seqid=s.seqid
where a.tabschema='SCHEMA'
and a.TABNAME='TABLE1'
and a.COLNAME='SYSTEM_USER_KEY'
So basically what happened is that somehow you got records in your table with ids that are bigger then the current last value of your identity sequence. So sooner or later these ids will collide with identity generated ids.
There are different reasons on how this could have happened. One possibility is that data was loaded which already contained values for the id column or that records were inserted with an actual value for the ID. Another option is that the identity sequence was reset to start at a lower value than the max id in the table.
Whatever the cause, you may also want the fix:
SELECT MAX(<primary_key_column>) FROM onsite.forms;
ALTER TABLE <table> ALTER COLUMN <primary_key_column> RESTART WITH <number from previous query + 1>;
I have a table:
CREATE TABLE Demo (
id uniqueidentifier PRIMARY KEY
);
I want to create an AFTER UPDATE (or INSTEAD OF UPDATE) trigger, and I need to know OLD and NEW values of "id" column inside the trigger.
Is it possible to do this?
No. This isn't possible.
If the table has 2 rows and you update both of them there is no way of knowing which row in INSERTED maps to which in DELETED.
You can use the OUTPUT clause for this (outside a trigger) though.
Or you could add an IDENTITY column to the table and use that to join INSERTED and DELETED (it is not permitted to update identity columns so that gives you something immutable)
I am programming for iPhone and i am using SQLITE DB for my app.I have a situation where i want to insert records into the table,only if the records doesn't exist previously.Otherwise the records should not get inserted.
How can i do this?Please any body suggest me a suitable query for this.
Thank you one and all,
Looking at SQLite's INSERT page http://www.sqlite.org/lang_insert.html.
You can do it using the following syntax
INSERT OR IGNORE INTO tablename ....
Example
INSERT OR IGNORE INTO tablename(id, value, data) VALUES(2, 4562, 'Sample Data');
Note : You need to have a KEY on the table columns which uniquely identify a row. It is only if a duplicate KEY is tried to be inserted that INSERT OR IGNORE will not insert a new row.
In the above example if you have a KEY on id, then another row with id = 2 will not be inserted.
If you have a KEY only on id and value then a combination of id = 2 and value = 4562 will cause a new row not be inserted.
In short there must be a key to uniquely identify a ROW only then will the Database know there is a duplicate which SHOULD NOT Be allowed.
Otherwise if you do not have a KEY you would need to go the SELECT and then check if a row is already there, route. But here also whichever condition you are using on columns you can add them as a KEY to the table and simply use the INSERT OR IGNORE
In SQLite it is not possible to ALTER the table and add a constraint like UNIQUE or PRIMAY KEY. For that you need to recreate the table. Look at this FAQ on sqlite.org
http://sqlite.org/faq.html#q11
Hello Sankar what you can do is perform a select query with the record you wish to insert and then check the response via SQLite's SQLITE_NOTFOUND flag you can check whether that record already exists or not. If it doesn't exist you can insert it otherwise you skip inserting.
I hope this is helpful.