Can I install Visual Studio Code on Windows server 2008 ?
I am a developer but I sent the information to my administrators and they told me that the setup file crashes after launched
I get seput file from hee https://code.visualstudio.com/download
procesor: Intel(R) Xeon(R) Gold 6142 CPU # 2.60Ghz - 2.59 GHz
RAM: 8 GB
64-bit
virtual machine
1 CPU - 2 cores
Windows Server 2008
First time answering here so bare with my vintage reply formatting. (also pardon that i couldn't capture screen due to server is on a intranet that not accessible on this device causing a long reply)
Being a unfortunate fellow that need to work on legacy Systems and Application frequently, i happen to have a fresh 2008R2 server recently setup by my team's Server Admin with following specs:
processor: Intel(R) Xeon(R) Gold 5220 CPU # 2.20Ghz - 2.19 GHz ,
OS: Windows Server 2008R2 x64 ,
RAM: 8GB
The versions that is able to install was 1.70.3,which is the same version that is the last supporting versions for Windows 7 as well,if you happen to need to work on devices using that OS version.
although i'm uncertain whether it is a VM or not, i'd like to point out a few more things that your question did not cover but need to consider:
The installer version (System setup vs User Setup)
aside from the x64 |x86 | ARM installer differences, as you've not mentioned which versions of the build and which exact setup installer you sent to your admin, i've first replied which build version successfully installed on 2008R2, which as of writing the latest build was 1.73.0 and on run,it pop up a error message as follow regardless of System/User Setup:
This Program does not support the version of windows your computer is running.
in our current case that we want specific previous versions installer, VScode FAQ on previous versions have a URL lists that enables you to download a specific build version of your preferred setup. For my case (and also refer below to exactly why this one), i've go for System setup, and i know the aprox. supporting version was ~1.70.0, so i used the link as below and replace the {version} to start:
https://update.code.visualstudio.com/{version}/win32-x64/stable
Active Domain, Multiple user sessions etc.
Per VSCode requirements page stated,
VS Code does not support multiple simultaneous users using the software on the same machine, including shared virtual desktop
infrastructure machines or a pooled Windows/Linux Virtual Desktop host
pool.
as im not sure do you work solo or do have fellow colleagues to code on the server at the same time, you might need to reconsider to install using user or System setup.
if your intentions are to use exclusively on a specific AD account, then user setup should probably be good enough.
however, if the intentions was to setup say a shared Remote desktop connections on the VM that allows multiple RDC sessions simultaneously for coding,programming etc., so you intend to install a system setup to allow all users on said server to be able to use VScode, then you might run into the problem the VScode requirements stated it does not support.
in addition, as i was remote connected as administrator , when using a 1.70.2 user setup ,a different warning message as follow was thrown:
This user Installer is not meant to be run as Administrator. If you would like to install VS Code for all users in this system, download the system Installer instead.Are you sure you want to continue?
as the installer itself also checks with the operator on this matter, your admin may have skipped on the exact reasons why the install failed and just told you the installer crashed.
if you absolutely need VScode to run on the server but can't install for reasons, the last resort (aside from going for alternatives like notepad++) is to Setup a Portable Mode builds on your own workstation/devices first, then upload the package to the server and use it from there.
i wouldn't go into too much detail in that as this reply already span for a starwars trilogy length but keep in mind, version limitations still apply, and whatever add-ons you need, you need to download them first before bundle it into the package to upload and run on your server.
Anyone that is a System admin or infrastructure architects , do correct me on my novice understanding on Server settings etc. as although i'm primarily a programmer, i did end up touching a lot more things that i'm not specialized into over the few years of vendor career work so there bound to be incorrect/inaccurate concepts i spilled. cheers.
Related
I have successfuly run rStudio on Amazon Web Services and it is extremely useful.
I want to run eclipse on AWS as well. When I type this in to google most tutorials are about the eclipse plugin. That's not what I want. I want to run eclipse on AWS.
I tried setting up an instance on EC2 which allowed me to run windows server 2012 but I couldn't install anything because of various internet explorer configuration issues and anyway I hat windows. I also tried a remote linux installation but its not really what I want. I want to run eclipse so that I can access it from a public DNS in the same way that I have managed to do with rStudio. Is this possible. Are there other (even non-AWS) ways?
I presume that by "AWS" you are actually referring to Amazon EC2 virtual machines.
Installing software on an Amazon EC2 instance is no different to installing on any other computer -- it's the same copy of Microsoft Windows you would use elsewhere.
The difficulties you mention of running Internet Explorer on Windows 2012 is entirely part of Microsoft's (rather strange) security settings that discourage using Internet Explorer as a system administrator, in order to combat security weaknesses that people try to exploit. Windows 2012 will no longer be supported by Microsoft in 2018.
I recommend using Windows 2016, which does not seem to impose such restrictions. It's also a newer, supported operating system that matches Windows 10.
Then, just install the software as normal and things will work a lot better for you.
Update:
You're right -- IE has problems on Windows 2016 but they are different to what is happening on Windows 2012 (last time I looked).
To get around the silly Microsoft IE security:
Run Server Manager
Go to Local Server
Click IE Enhanced Security Configuration ("On")
Turn both settings off
Internet Explorer then works and you can install Eclipse.
I'm considering getting a collection of Dell PowerEdge servers. Dell documentation is pretty poor (no surprise there) and I have trouble figuring out if I can go with iDRAC Basic or if I need iDRAC Express or Enterprise.
My need is to install Ubuntu Server (minimal install with SSH is enough). After install all I need is SSH and possibly a remote "reset" button. I can install the OS before taking the system to server room so I don't really need remote OS deployment tools. However, the server does not have a graphics adapter. Is it possible to install Ubuntu with just iDRAC Basic or do I need additional hardware?
#iwork4dell Remote OS deployment implies Virtual Console (like VNC) and Virtual Media (using a remote ISO like a local DVD). These are Enterprise license features. OS deployment tools are are the driver pack that is stored in flash on the server and made available during OS installation to support new hardware on older OSes.
The iDRAC is an integrated VGA adapter so all the Power Edge servers do have a video adapter in them unless you disable it in BIOS. If your willing to attach a keyboard and monitor to the server basic is all you need. You can also upgrade the iDRAC with a license key after purchase.
See http://en.community.dell.com/techcenter/extras/m/white_papers/20440743
and http://i.dell.com/sites/doccontent/shared-content/data-sheets/en/Documents/idrac-spec-sheet.pdf
IDRAC is possible, just you can open gui of idrac and then launch on the online server. You can add the iso file on virtual server.
My Clearcase Version: 7.1.0 .
My os is windows 7, after I installed Clearcase. I couldn't create a dynamic view by using Create View.And I found that when i start clearcase service from control panel, there is only two service.
Is there any ways to correct this problem except to download a higher version.
ClearCase 7.1.2 is deployed on our Windows 7 at work.
However, when I see that there is only two services, that means MVFS (which is a device, not a driver) has failed to install properly.
The usual fix is to uninstall and reinstall ClearCase.
But there is no guarantee for 7.1.0.
The OP adds:
I have reinstall it three times, but the problem still exists
That confirms 7.1.0 is not supported (at least for the dynamic views part) on Windows 7.
As "System Requirements for ClearCase 7.1.x" confirms, Windows7 SP1 actually needs 7.1.2.3 at minimum.
And even then, you can have some issue: " PM54437: Windows 7 64bit MVFS clients flood albd_server of the View Server host with ALBD_FIND_SERVER RPCs" (which needs 7.1.2.6)
So getting the latest 7.1.x is recommended.
In your case though, since it isn't possible to get a version above 7.1.0, you can try and install a Virtual PC Windows Xp on your Windows 7.
Microsoft Virtual PC for Windows (formerly Connectix Virtual PC) is a client based software virtualization application that allows simultaneous operating systems to run on a single PC.
Each virtual machine emulates a complete hardware system—from processor to network card—in a self-contained, isolated software environment, enabling the simultaneous operation of otherwise incompatible systems.
ClearCase does support Virtual PC.
We have a large application that has been developed over 15 years and in installed in 200+ client locations. The application currently consists of an Access database and a bunch of executable and report files located on a network share. A Setup.EXE file is run on each client machine (dlls are installed on the client) and then the client machines run the executables directly from the network share. During our upgrade procedure the new executable and report files are copied to the network share and that way each client gets the update immediately.
Our current installation program is very old and, among other things, it doesn't handle x64 so we are in the process of moving to a new deployment tool. At the same time we are migrating client Access databases to SQL Server. I am having difficulty finding a deployment tool to do what we require. Specifically we need the install/upgrade file to do the following:
It must be able to be run from a client machine on a network and copy the new executable and report files to the network share. That share could be a Linux box or a dumb storage device.
Accept a password before running the installation
Allow the user to select the network share as the location to copy the executables
It must NOT add anything to the client machine from where the package is run (Add/Remove Programs, registry, etc.)
Connect to a SQL Server database and run a script
The install/upgrade must be contained in a single, standalone .msi or .exe file. (no dependencies on dlls or frameworks other than those that come with Windows XP)
The file must be able to be run in one simple step. It is the end user that runs the upgrade without our support and without involvement from IT.
It looks like the closest thing to what I need is WiX but the problem there is that whenever the .msi file is run from a client, the client machine thinks that a program is being installed so it allows the client machine to uninstall the product, which is not acceptable.
If the product were written today it would certainly be architected differently but it currently is what it is and we can’t change that. Any help here would be greatly appreciated!
WiX is just a toolset built on top of Windows Installer technology. It makes many things easier and simpler as well as hides lots of Windows Installer weird features... But, it is still limited by Windows Installer, its underlying technology.
Your list of requirements made me think that Windows Installer is not the right technology to choose. I would assume that you'll spend more time on workarounds, than on functional code... But I have no experience with other installation technologies, so I'll leave those recommendations to others.
I have a windows 7 machine, but for various reasons I need to have access to windows xp also.
I know it's possible for me to have a windows xp virtual machine set up, so that effectively I can have use of both.
Irritatingly, I've got into a situation where I really must have visual studio 2008 installed on Windows 7 and XP (don't ask!). My question is, can I share my existing software licenses across the virtual machine also, or do I have to purchase separate ones?
Because you are running Win7 on a CPU that has hardware virtualisation enabled, you have the option of using the Windows XP Mode, which is a virtualised copy of XP that is already fully licenced, you don't need an extra licence for it.
If you want to setup a separate virtual machine running XP then yes, you will need a separate licence for XP itself.
If you sourced your copy of VS through a MSDN subscription then that is per user, so you can install it multiple times. If you bought a single copy of VS then the licence will be per machine (which includes virtual machines).
The simple answer is Yes - If you have a new Virtual Machine with an OS installed all software running inside this container (including the OS) is classed as a separate machine (such as a second PC next to it)
Double check your VS2008 Licence as you may be able to install on more than 1 PC.
Obviously this is my advise from previous experience - if your really concerned check with a Solicitor before proceeding
Many Microsoft licenses are per user, not per machine. If this is the case (check your license) then you can install it on both your Windows 7 installation and Windows XP installation.