I have actually spent a lot of time looking for a solution for this. Stackoverflow is my last resort. Before I dive in I would like to describe my requirements.
My requirements,
I need an editor like slack that automatically converts markdown to relevant TextStyle or html. For example if I type, ## Hello and press enter. it is styled as H2 styled text.
Moreover, I also need to show a dropdown whenever I press # or # to select from a list of options.
In short, I need something like quip, slite or medium.
I was hoping that this will be easy in flutter, given half of these features are already there in Google's Gmail and other apps by google by havent yet found a single library that meets these requirements.
What I have already tried?
Quil: I found out by flutter_quill but for that I have to stick to a toolbar on the top. And no mentions support.
Zefyr and html_editor: I have tried these, but they are very buggy and slow. Moreover, they have very limited documentations.
Custom Flutter: Medium-like Text Editor. This is the most promising solution but it is lacking one essential feature of text editor. The article proposes that I divide the entire input field into multiple text fields which I can control using state. But this has one big problem that is, what if I want to select the entire body of text. Any hacks on this will be well appreciated.
If you have any questions and if the question isn't clear enough, please free to comment down below.
I have a basic footer that would be super easy to create in almost any environment but email.
i am looking to do a email/phone/unsubscribe line to appear like
"email#email.com | 1-888-PHONENO (1-888-111-1111) | Unsubscribe"
works perfect in desktop view (600px width) but once i try and do anything responsive it dies and formats all crooked. I've had good luck with flex box with apple products, but many of the microsoft products (email clients) strip the flexbox out. so i am using table but finding it difficult to make it responsive.
I would use media queries but when i use display:none, it doesn't always work. it almost like the sendgrid console wont let me target certain elements. for example i can easily change the html background using html, but when i give classes to elements, nothing happens, id's either. its like the style doesnt get applied.
to solve this issue i'd be totally happy with writing different header/footers and then rendering them per the view (599 down, 600 up) if anyone has experience using media queries in emails or sendgrid please advise.
I could also write a responsive table but having trouble w how to set that up for the above. some of the items would need to be wrapped, like it would be ok to render on 2 lines in mobile as long as the style looked decent. right now it looks jacked.
you cant-
due to email clients rendering code totally different (some strip margins/padding, some strip flexbox, some strip other things from your css)
just stay to best practices: inline style, single column tables work good on almost anything. keep it simple.
I made a nice looking inline css flex box footer. looked great on mac/google products, looked like garbage on all outlook/samsung.
so i had to dumb down my beautiful footer to something that was more compliant across platforms.
litmus is a tool we bought that really helps. you basically just have to design it then test. litmus will show you previews on every possible email client so u can go thru and find a good balance of compatibility and design.
for sendgrid, the built in template and drag and drop option render good on everything. use the v3 api and dynamic templates. use a drag and drop then add html blocks to customize what u need to. use the drag and drop as much as possible because they build a robust html code for you. unless you want to manually type out a 600 line email that is totally disorganized.
Recently we had the following problem:
The article includes several sections which are very important for my colleagues from three different departments.
According to my colleagues - the article is updated properly, except for one vital section which hasn't been updated for more that three months.
Default 'last modified' page block displays that the most recent update took place two weeks ago and our new colleagues had no idea about the section which hasn't been touched by the author for more than three months, which caused some issues.
Is there a way to create a macro which displays the most recent update for the selected section of the page? For example:
entire page - last modified on Jun 06, 2019;
selected section - last modified on Apr 03, 2019.
We need to use similar functionality like here and also here , but the macro body should be able to select a section of the page (a paragraph or a table for example).
Confluence/Server.
Thank you.
This is probably not possible (not the easy way you would like to have it implemented).
Except some heavy scripting (ScriptRunner for Confluence) or custom addon development, the only easy way is the following:
Try to move these 3 sections into 3 separate sub-pages and link them the main (parent) page - using Page Include macro.
On top of each section you may add information (custom macro) about last subpage updated date.
However, this solution has its pros & cons:
(+) out of the box solution
(+) you can further restrict pages who can and cannot edit the subpages (sections)
(-) you need to script custom user macro to display the last page update of different page than current (should be easy)
(-) teams will have to edit subpages instead of the main page (a simple process change)
Alternatively, you can check with StiltSoft and their InPlace Editor - this addon works with section and it would be interesting to let them ask if they are open to implement your requested functionality.
How does the Reader function of Mobile Safari in iOS 5 work? How do I enable it on my site. How do I tell it what content on my page is an article to trigger this function?
A lot of the answers posted here contain false information. Here are some corrections/clarifications:
The <article> element works fine as a wrapper; Safari Reader recognizes it. My site is an example. It doesn’t matter which wrapper element you choose, as long as there is one, other than <body> or <p>. You can use <article>, <div>, <section>; or elements that are semantically incorrect for this purpose, like <nav>, <aside>, <footer>, <header>; or even inline elements like <span> (!).
No headings are required for Reader to work. Here’s an example of a document without any <h*> elements on which Reader works fine: http://mathiasbynens.be/demo/safari-reader-test-3
I posted some more details regarding my findings here: http://mathiasbynens.be/notes/safari-reader
I've tested 100 or so variations of this on my iPhone in order to figure out what triggers this elusive Reader state. My conclusions are as follows:
Here is what I found had an impact:
Having around 200 or more words (or 1000 characters including whitespace) in the article you want to trigger the "Reader" seems necessary
The reader was NEVER triggered when I had less than 170 words; although it was sometimes triggered when I had 180 or 190 words.
Text inside certain elements such as <ol> or <ul> (that are not typically used to contain a story) will not count towards the 200 words (they will however be displayed in the reader if the reader is triggered for other reasons)
Wrapping the 200 words in a block element such as a <div> or <article> seems necessary (that said, I'd be surprised if there were any websites where that was not already the case)
For full disclosure, here is what I found did NOT have an impact:
Whether using a header or not
Whether wrapping the text in a <p> or letting it flow freely
Punctuations (ie removing all periods, commas, etc, did not have an impact)
It seems the algorithm it is based on is looking for p-Tags and it counts delimiters like "." in the innerText. The section (div) with the most points gets the focus.
see:
http://lab.arc90.com/experiments/readability/
Seems to be the base for the Reader-mode, at least Safari attributes it in the Acknowledgements, see:
file:///C:/Program%20Files/Safari/Safari.resources/Help/Acknowledgments.html
Arc90 ( Readability )
Copyright © Arc90 Inc.
Readability is licensed under the Apache License, Version 2.0.
This question (How to disable Safari Reader in a web page) has more details. Copied here:
I'm curious to know more about what triggers the Reader option in Safari and what does not. I wouldn't plan to implement anything that would disable it, but curious as a technical exercise.
Here is what I've learned so far with some basic playing around:
You need at least one H tag
It does not go by character count alone but by the number of P tags and length
Probably looks for sentence breaks '.' and other criteria
Safari will provide the 'Reader' if, with a H tag, and the following:
1 P tag, 2417 chars
4 P tags, 1527 chars
5 P tags, 1150 chars
6 P tags, 862 chars
If you subtract 1 character from any of the above, the 'Reader' option is not available.
I should note that the character count of the H tag plays a part but sadly did not realize this when I determined the results above. Assume 20+ characters for H tag and fixed throughout the results above.
Some other interesting things:
Setting for P tags removes them from the count
Setting display to none, and then showing them 230ms later with Javascript avoided the Reader option too
I'd be interested if anyone can determine this in full.
Both Firefox and Chrome have the similar plugin named iReader. Here is its project with source code.
http://code.google.com/p/ireader-extension/
Read the code to get more.
I was struggling with this. I finally took out the <ul> markings in my story, and viola! it started working.
I didn't put any wrapper around the body, but may have done it by accident.
HTML5 article tag doesn't trigger it on my tests. It also doesn't seem to work on offline content (i.e. pages saved on your local machine).
What does seem to trigger it is a div block with a lot of p's with a lot of text.
The p tag theory sounds good. I think it also detects other elements as well. One of our pages with 6 paragraphs didn't trigger the Reader, but one with 4 paragraphs and an img tag did.
It's also smart enough to detect multi-page articles. Try it out on a multi-page article on nytimes.com or nymag.com. Would be interested to know how it detects that as well.
Surprising though it may be, it indeed does not pay any attention to the HTML5 article tag, particularly disappointing given that Safari 5 has complete support for article, section, nav, etc in CSS--they can be styled just like a div now, and behave the same as any block level element.
I had specifically set up a site with an article tag and several inner section tags, in prep for semantic HTML5 labeling for exactly such a purpose, so I was really hoping that Safari 5 would use that for Reader. No such luck--probably should file a bug on this, as it would make a great deal of sense. It in fact completely ignores most of the h2 level subheads on the page, each marked as a section, only displaying the single div that adheres to the criteria mentioned previously.
Ironically, the old version of the same site, which has neither article, section, nor separating div tags, recognizes the whole body for display in Reader.
See Article Publishing Guidelines.
Here are APIs about how to read and parse: Readability Developer APIs. There's already a project you can refer: ruby-readability.
A brief history:
The Safari Reader feature since Apple's Safari 5 browser embeded a codebase named Readability, and Readability started off as a simple, Javascript-based reading tool that turned any web page into a customizable reading view. It was released by Arc90 (as an Arc90 Lab experiment), a New York City-based design and technology shop, back in early 2009. It's also embeded in Amazon Kindle and popular iPad applications like Flipboard and Reeder.
I am working on algorithms for cleaning web-sites from information "waste" similar to Safari Reader feature. It's not so good as readability but has some cool stuff.
You can learn more at smartbrowser.codeplex.com project page.
Has anyone had experience with MySource Matrix as a content management system? If so, thoughts/opinions/comments?
Thanks in advance.
Absolutely excellent. It takes little while to get used to how it does things with its asset structure, but it is really flexible and powerful. Simple edit interfaces are great too.
Make sure you give it enough hardware. If you want dynamic content without caching you need heaps of grunt to make it hum.
Hands down the best CMS I have ever used. We use it on the Pacific Union College website, as well as many side projects. I am still amazed at all it has to offer compared to other products that are not free.
Give it a good look, and take some time to get past the learning curve, but once you do, it will be more than worth it. :)
I've recently been trying to use it in an organization where many non power users are generating content. - it has many interface bugs and odd behavior, so that many simple tasks (i.e. loading images) often have to be done by an power user (i.e. me).
When you are editing the HTML of page content white space is not preserved. If you where to format the HTML in the WYSIWYG editor, save you changes, and then come back the whitespace you've added will be removed - actually when you switch the WYSIWYG editor into HTML mode it doesn't show you the exact HTML, and does some silly things - like pressing enter inserts non breaking spaces - but doesn't show them until you save and re-enter HTML mode.
it is a number of little details like this which make it generally frustrating to use and disliked by everyone here.