I have created a pipeline to tag and push the commit, I am getting access denied when I push the code to remote origin from the gitlab job.
Note: The script is working fine in the local machine.
- Pushing release to origin
remote: You are not allowed to upload code.
fatal: unable to access 'https://gitlab-ci-token:[MASKED]#xxxxx/xxxx/test_repo.git/': The requested URL returned error: 403
origin
- Switching back to HEAD branch. (restoring local changes)
.gitlab-ci.yml
build:
stage: build
before_script:
- git config --global user.email "${CI_EMAIL}" && git config --global user.name "${CI_USERNAME}"
script:
- bash ./tag-release.sh -b main -t $release
You cannot use the builtin CI token to push to the repo. Instead, you'll need an API token with appropriate scope to push to the repo. A good way to do this is to use project access tokens. Once you have to token, you can put it in the project CICD variables settings. Then use that API token variable instead of CI_JOB_TOKEN.
I have removed the existing origin settings using
git remote rm origin
then added the remote origin with the project access tokens.
git remote add origin https://<access-token-name>:<access-token>#gitlab.com/username/reponame.git
added the personal access token(GIT_TOKEN_VALUE) and personal access token name(GIT_TOKEN_NAME) in cicd variables and masked/protected it for security purpose.
git remote add command with cicd variable is
git remote add origin https://${GIT_TOKEN_NAME}:${GIT_TOKEN_VALUE}#gitlab.com/username/reponame.git
Related
I am trying to set up to build my first website and have been following an online tutorial. When trying to link visual studio and my GitHub repository, this is the message I get:
`
samanthacanela#samanthas-air Canela Street Art % git commit -m "initialized git repository"
[main 3a08e0a] initialized git repository
2 files changed, 0 insertions(+), 0 deletions(-)
delete mode 100644 about.html
rename homepage.html => home.html (100%)
samanthacanela#samanthas-air Canela Street Art % git push
fatal: The current branch main has no upstream branch.
To push the current branch and set the remote as upstream, use
git push --set-upstream origin main
To have this happen automatically for branches without a tracking
upstream, see 'push.autoSetupRemote' in 'git help config'.
samanthacanela#samanthas-air Canela Street Art % git push --set-upstream origin main
The authenticity of host 'github.com (140.82.112.3)' can't be established.
ED25519 key fingerprint is SHA256:+DiY3wvvV6TuJJhbpZisF/zLDA0zPMSvHdkr4UvCOqU.
This key is not known by any other names
Are you sure you want to continue connecting (yes/no/[fingerprint])? yes
Warning: Permanently added 'github.com' (ED25519) to the list of known hosts.
git#github.com: Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
samanthacanela#samanthas-air Canela Street Art %
`
I'm an absolute beginner. What the hell am I doing wrong?
I was following along a tutorial and they lost me.
Based on my understanding, I can see that you may haven't setup the origin remote URI. To fix that issue, you'll need to follow these steps.
Logging into git (If you aren't already)
Run these commands to set your display name and email when pushing:-
$ git config --global user.name "Your name here"
$ git config --global user.email "your_email#example.com"
Using HTTPS access method (recommended)
Using GitHub CLI, you can run $ git auth login and follow the steps to login.
Or if you're using GCM (Git Credential Manager)* refer to this article by GitHub
* GCM is another way to store your credentials securely and connect to GitHub over HTTPS. With GCM, you don't have to manually create and store a personal access token, as GCM manages authentication on your behalf, including 2FA (two-factor authentication).
Using SSH access method
If you clone with SSH, you must generate SSH keys on each computer you use to push or pull from GitHub. For more information, see "Generating a new SSH key."
Setting up your repository
** Make sure to run these commands inside your git environment and not globally.
#Set a new remote
git remote add origin github.com/example/example.git
#Verify new remote
git remote -v
Basically, a common cause for an error after following these steps is cloning using HTTPS method instead of SSH. You can correct this by going to your repository, clicking "Clone or download", then clicking the "Use SSH" button above the URL field and updating the URL of your origin remote like this:
$ git remote set-url origin git#github.com:ex-user/example.git
And that forces the source to be SSH.
If this still gives you an error, please refer to this answer.
For more help, refer to this document.
I'm a beginner to GitHub.I need to send a pull request to the master branch.
when i typed the code
git push origin master
It gives me the error
fatal: unable to access
'https://github.com/www-prolificme-com/mahawiki/': The requested URL
returned error: 403
Updated
You mentioned you are trying to pull from git but the command is git push. Anyways, most probably you are getting this error because your repo url is not set locally.
If this is the first time you are sending git request from your system, you might want to setup your username by git config --global user.name "John Doe"
If you have already used git on your system, try checking the git configuration on your system using git config --list command to check whether your repo URL is setup or not.
If the url is not setup run git remote set-url origin https://github.com/www-prolificme-com/mahawiki/
Run git remote -v to verify if your url is setup
git add .
git commit -m "your message"
git push origin master
Remove/Update the saved credentials:
Click Start
Search for 'Credential Manager'
Select 'Windows Credentials Manager' > 'Windows Credentials'
Search for the credentials that you want to remove/update
Click on the credential entry > Click 'Edit' or 'Remove'
your repo is not setting locally
so, you seemed crash message
first
git config --list
to showing your git repo set list
and
git remote set-url origin <your git repo address>
to access git repo and git add . to add your files to git container
git commit -m "your git commit message"
this is your git commit message version or anything possible
git push origin master
finally your files pushing on git repo
it's done!
try it
I got this same problem then I try to this below command.
step 1:
git config --global user.email "user email"
step 2:
git config --global user.name "user name"
After running those commands, you can use this command to push your code:
git push origin master
Even if you set all credentials and other setups in the local machine, you might face this problem.
Currently, GitHub uses 'personal access token' so when or after creating personal access token you must check the Select scopes.
You select all you need and then push again.
It will be pushed successfully.
If nothing working please check if you have checked the below checkboxes while creating token
I already made a repository in github as wordpress-template.
I created a .git repository locally, added some files there, and committed it.
Then I created a remote as origin and give it the url of the github repository as:
git remote add origin git#github.com:squalporeover/wordpress-template.git
Now I want to push my master branch to that repository. I ran the following command:
git push origin master
But it shows:
Permission denied (publickey).
fatal: Could not read from remote repository.
Please make sure you have the correct access rights
and the repository exists.
It looks like you added the SSH version of the remote URL. In order to use this you need to set-up Github with SSH.
Otherwise use the HTTPS version of the clone URL which will ask for your username and password:
You need to use ssh-keygen to generate an ssh key pair.
See: https://help.github.com/articles/generating-a-new-ssh-key-and-adding-it-to-the-ssh-agent/
Duplicate found here: Git - Permission denied (publickey)
This worked for me:
Step 1- git remote rm origin
Step 2-select the http option in github
step 3- run the following command again
git remote add origin https://github.com/yourdirectory/link.git
git branch -M main
git push -u origin main
I am having issues with adding an existing project through Github using terminal. I used the following commands:
In Terminal, add the URL for the remote repository where your local repository will be pushed.
# Sets the new remote
git remote add origin remote repository URL
# Verifies the new remote URL
git remote -v
Push the changes in your local repository to GitHub.
# Pushes the changes in your local repository up to the remote repository
# you specified as the origin
git push origin master
It came with the following results:
remote: Permission to Bloc/bloc-jams-student-skeleton.git denied to ynoorstani.
fatal: unable to access 'https://github.com/Bloc/bloc-jams-student-skeleton.git/': The requested URL returned error: 403
Any helpful tips or insight would be awesome!
You could write to this repo (push) only if you were part of the Bloc organization members (here is the list).
Since you are not in that list, you would need to fork that repo in order to push to it.
I have created a repository on github named pygame. Created a clone and added files and commited.but when I attempt to push I receive the following error:
git push -u origin master
error: The requested URL returned error: 403 while accessing https://github.com/amalapk/pygame/info/refs
fatal: HTTP request failed
I can ssh to git#github.com and receive the notice that I logged in successfully, but can't push to my repository.
I recently experienced this problem when setting up a new clone of my github project.
You need to include your username in the URL to your project, in the form
https://user#github.com/project/...
For example, the URL provided for my test github is this:
https://github.com/jdblair/test.git
If I add my username to it, like this, then I'm able to push and pull from github with no problem:
https://jdblair#github.com/jdblair/test.git
It is easiest to use the URL that contains the username starting from when you clone a project.
You can change the URL for an existing project like this:
git remote set-url origin https://user#github.com/project/foo/bar.git
You can use the ssh authentication instead if you want, but that's a separate setup process.
Github now is asking us to use git 1.7.10 or later:
https://help.github.com/articles/error-the-requested-url-returned-error-403
The GitHub Remote page mentions the read/write addresses for a repo:
Make sure your clone address is like:
https://github.com/username/yourRepo.git
And that you have defined:
git config --global user.name "Firstname Lastname"
git config --global user.email "your_email#youremail.com"
Should you use a git address (without ssh), you would also need:
git config --global github.user username
git config --global github.token 0123456789yourf0123456789token # no longer needed
(with your token coming from “Account Settings” > Click “Account Admin.”)
Update 2013: you still can generate a token (see "Creating an access token for command-line use"), but you would use it as a password for https url.
Actually, if you activate the 2FA (two-factor authentication) mechanism on GitHub, you will need a token for your https url (because your regular password would trigger the second-step verification).
See "Configure Git clients, like GitHub for Windows, to not ask for authentication"
See more at "Which remote URL should I use?".
It's all in the remote.
Change your current remote from https://github.com/amalapk/pygame.git to git#github.com:amalapk/pygame.git and enjoy.
To do this... (assuming your current remote is called origin)
git remote set-url origin git#github.com:amalapk/pygame.git
In my case getting rid of such error message was resolved this way:
Person was simply added to github repository as a colaborator.
Thats it - error vanished magically.
Committing to github from server this is what worked for me in the terminal or git bash
To create a remote to github.com try:
git remote add origin https://put your username here#github.com/put your git username here/put your repository name here
To change the remote just do:
git remote set-url origin https://put your username here#github.com/put your git username here/the name of your repository here
Please follow the instructions on http://help.github.com/create-a-repo/
You have cloned your repository with the public read only url.
RTFM