I’m trying to Update/Post to my documents in a MongoDB database through using the Data API via postman, I followed all the steps and filled in all the essential variables and I consistently get that error.
invalid session: error finding user for endpoint
Here it shows that I successfully forked the MongoDB Data API to my Postman collection and filled in all the necessary variables.
First Image - Postman Variables
This is me making the POST request to find a document in my database (this same exact error keeps on showing with all the other endpoints, update, insert, etc…)
Second Image - The Request And The Occurring Error
And these are the header and body of the request showing that the variables were correctly setup and the the request is going through with no problems but I get that same error every time.
Third Image - Header and Body of The Request
So I figured it might be a postman thing so I tried to make the request using Python instead and I got the same exact error there too.
Fourth Image - Python Request
This is the document I am trying to send the requests to.
Fifth Image - The database in MongoDB Compass
And this is my Data API game with the cluster all being setup and given access for both reading and writing.
Sixths Image - The MongoDB Data API Page
So I am not sure what is exactly going on or what am I not seeing.
Related
I am submitting a request for data from the Binanance API as follows:
https://api.bscscan.com/api
?module=logs
&action=getLogs
&fromblock=24726622
&toBlock=24726632
&address=0x94084b7a8d80b2c3cc0dccd87cb6ae3cc67d364d
&topic0=0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef
&apikey=JRYDR6FBWRKY5C8NMZJKFB8GEP1QHFQJQT
However, I can't get any data from this URL. I have double-checked, and I know that the parameters are correct.
Here is an example of using Binanace's API, which works well:
https://api.bscscan.com/api
?module=logs
&action=getLogs
&fromBlock=4993830
&toBlock=4993832
&address=0xe561479bebee0e606c19bb1973fc4761613e3c42
&topic0=0xddf252ad1be2c89b69c2b068fc378daa952ba7f163c4a11628f55a4df523b3ef
&apikey=YourApiKeyToken
Why is that working but mine not working?
I would highly suggest using Postman, which you can use to quickly test requests. I ran your request, with api-key, through Postman and was able to get a 200 response with data. See this screenshot.
Please note I blanked out the api key value. I suggest you do the same in your post unless its fake.
I had to remove the line breaks in the code you pasted. Could this possibly be the issue?
I am passing json data to a post request via a web task.
The body contains a number of records that are to be saved by the api.
The body returned contains a status per record sent, but within the webtask i cannot see the over all status of the post request.
In postman, the overall status shows up like below:
This status and response code (429 in this case) is not visible in the output of the webtask.
Is anyone aware if i can view this in the webtask, as its clearly visible via postman.
Thanks,
I don't believe there's any way to get this; some time ago the MS response was to create a fn app to capture it and call that from adf :)
However you can at least distinguish 2xx from 4xx by using the On Success and On Failure dependencies in the pipeline
I am trying to fetch data from mongodb altes, I have uploaded 5 collections which is working absolutely fine but as soon as I'm trying to upload new Api it is showing fine (status fine) but as soon as I try to check it through postman ..it shows "[]" empty;
what could be reason;
enter image description here
few days back I had put out question, so I got the answer ....
if you are able to post Api from postman and getting inside the mongodb atles , but when you post the data "Manually" and when you check in the postman and coming empty, then you have to make post req route as you have made get reoute, And post through postman instead of posting manually on mongodb atles....then you will be successfully getting back Api from APi.
I have problem with OpenRouteService API (Direct Routing Request via GET described in here http://wiki.openstreetmap.org/wiki/OpenRouteService#Direct_Routing_Request_.28via_GET.29).
My request is:
http://openls.geog.uni-heidelberg.de/route?start=18.609%2C53.02&end=18.749%2C53.49&via=18.01%2C53.12&lang=pl&distunit=KM&routepref=Pedestrian&&weighting=Recommended&avoidAreas&useTMC=false&noMotorways=false&noTollways=false&noUnpavedroads=false&noSteps=false&noFerries=false&instructions=false
(from Toruń in Poland to Grudziądz via Bydgoszcz).
Unfortonatly, I get error:
"validation error: Expected element 'EndPoint#http://www.opengis.net/xls' instead of 'viaPoint#http://www.opengis.net/xls' here in element WayPointList#http://www.opengis.net/xls"
If I put antyhing in "via=" this error appear.
When I change "via=" to empty value:
http://openls.geog.uni-heidelberg.de/route?start=18.609%2C53.02&end=18.749%2C53.49&via=&lang=pl&distunit=KM&routepref=Pedestrian&&weighting=Recommended&avoidAreas&useTMC=false&noMotorways=false&noTollways=false&noUnpavedroads=false&noSteps=false&noFerries=false&instructions=false
all works fine.
Is it problem with my request or api isn't working correctly?
It seems that the frontend API of OpenRouteService receives the GET requests correctly, but after it builds the request in xml and relays it to the backend server the server fails to validate the request correctly. It should be a problem with the backend server.
The frontend php code is here for reference.
The web frontend, which POSTs the xml directly to another backend server, seems to work correctly with via points.
I made a Dynamic web project using Eclipse IDE. I made a simple web app for learning.
I also made a REST service (jersey implementation) which i am using for insert,update,delete and for listing records from mysql database.
Now i want that i've a registration form which has some fields. I want that before inserting the data into database using my REST service, the service should validate form data.
I searched a lot google. I understand how to validate data in my service. But i am not getting that how to show the error message to individual form field to client.
Is there any complete example of this which does not use maven and show me the whole working from submitting form to show the error messages.
Thanks in advance..please help me guys..
You should change your approach slightly to solve this problem and implement it in the following way:
First of all You should add validation mechanisms on the client side and send registration request only when this validation will be successful.
You will find form validation tutorial for AngularJS here:
https://docs.angularjs.org/guide/forms
http://www.ng-newsletter.com/posts/validations.html
and for jQuery here:
http://runnable.com/UZJ24Io3XEw2AABU/how-to-validate-forms-in-jquery-for-validation
Server should respond with propper HTTP statuses (with optional message). For example:
200 OK (or 201 Created) - when registration finished successfully;
400 Bad Request - when registration cannot be finished successfully;
So in Your actual use case:
User fills HTML form inputs;
Inserted data are validated on the client side;
When data are invalid, error message is shown in the propper place (individual form field);
When data are correct request is sent to the serwer;
Server application tries to insert supplied data to database;
If operation is finished properly, server will answer with 200 (or 201) status code. Registration is finished.
If operation is not finished properly, server will answer with 400. Client (AngularJS, jQuery, JS) will show error message.
Hopefully, my answer will help You. Ask if You need more explanation.