I'm using a Raspberry Pi 4B. I saw some of the networks is disabled (dimmed in the listing). All of the disabled wifi networks come with a "blocked computer" icon aside.
May I know the meaning of the icon and how can I connect to those networks as I have the necessary info of it (password).
Related
I am new to Home Assistant and I currently have a disc image of the software installed on a Raspberry Pi 3b. I have managed to get this up and running successfully by connecting my PI to an internet connection via an ethernet cable and connecting my laptop to the same network wirelessly. The problem I am facing is that I wish to run this locally without an internet connection and simply connecting my laptop to the PI with the Ethernet cable does not seem to be working. I have tried looking around for support but I cannot seem to find much on the matter.
Home Assistant's default port is 8123 not 8023.
If there is a direct connection between your laptop and the Raspberry Pi then the chance is high that mDNS won't not work. Thus, homeassistant.local is not reachable.
Add a static IP address for your Home Assistant host and your laptop.
I have a raspberry pi 3 running windows IOT and it works fine when on a LAN connection. However the issue is that I want it to be on wifi. I have set the wifi connection up and set it to automatically connect and if I then remove the LAN cable everything works fine. But when I reboot the pi it refuses to automatically connect to the wifi. If I go back to the settings and select my wifi network it has the "Connect Automatically" box checked but when I click connect it asks me again for the password...
It is as if it is not saving the password for my network. How do I fix this issue?
how do i connect my raspberry pi to WIFI without ethernet cable. I have a wifi dongle or usb connected to my pi but the internet still doesnt work unless i connect a ethernet canble. can someone please help me out
You can setup your wi-fi via the command line, see a detailed guide on the official site:
https://www.raspberrypi.org/documentation/configuration/wireless/wireless-cli.md
Another option is to use the PIXEL desktop:
https://www.raspberrypi.org/documentation/configuration/wireless/pixel-desktop.md
I am trying to make my RPi 3 an AP using Windows 10 IoT core. RPi is connected with internet through Ethernet port and I want to make RPi 3 builtin WiFi to share internet with other devices. I have read documentation page but it is not working for me. I have tried with Windows IoT Onboarding and from PowerShell also. After selecting adapters from IoR Onboarding, clicked on start sharing service and a message appears which says "internet conncetion sharing has started" but I can't find network on other devices.
After selecting adapters from IoR Onboarding, clicked on start sharing
service and a message appears which says "internet conncetion sharing
has started" but I can't find network on other devices.
You could open Windows Device Portal and set your raspberry pi3 as the following instruction. Before doing this you would connect your raspberry pi3 with WLAN.
Select IoT Onboarding option on the left of the page. Then an Adapter configuration must be chosen. You could choose Access point adapter Microsoft Wi-Fi Direct Virtual Adapter #2 and choose Shared network adapter LAN9512/LAN9514 USB 2.0 to Ethernet 10/100 Adapter.
Then clicked on start sharing service. You could see the message appears which says "internet conncetion sharing has started".
At last make sure select enable in radio box and click on save button under the SoftAP settings. There is a message says reboot your raspberry pi3 for changes to take effect the SoftAP settings. Please click yes and your raspberry pi3 will be restarted.
After your raspberry pi3 is started you could connect your devices like PC or mobile phone on the SoftAP which is on raspberry pi3.
I want to install MATLAB and Simulink support package for Raspberry Pi. I follow this link to do . I directly connect my laptop with Raspberry Pi using Ethernat cable.
But i didn't get output.
while installing i got error - "Could not detect a Raspberry Pi board on "Local Area Connection". Check your Ethernet connection to Raspberry Pi.
The FDX/LNK/100 LEDs on the Raspberry Pi board should be illuminated.
For network trouble-shooting instructions see http://www.mathworks.com">The MathWorks Web Site"
Can anyone help to solve this problem?
I have also experienced your same issue but after proceeding in this way I solved it.
Before you put the SD card on the Raspberry Pi you need:
power off the Pi
connect the Ethernet cable to the host computer
finally power on the Pi
In addition you may take a look at this troubleshooting guide.
Try the following steps.
1. Open cmd and execute 'ipconfig'
check for a network interface with '169.x.x.x' ip address
If there is one, you could access your Pi via IP 169.254.0.2
If there is none, check if your Ethernet port is enabled and no static IP is configured.
The above steps make sure that your Ethernet port is in proper state.
Repeat the hardware setup with direct connection in the network settings.