I have a PostgreSQL database running on an Azure machine. When I try to create a table on a database, I get an error "cannot execute CREATE TABLE in a read-only transaction". The SQL query is being executed by a python script using a sqlalchemy engine. But I tried a similar query in PGAdmin installed on my machine and I get the same error. And I noticed that I do not have this issue if I connect to the database from a colleague's machine.
After further research, I found that if I execute SELECT pg_is_in_recovery(); in my PGAdmin, it returns true. And false on my colleague's machine.
Let me know if there is any way to correct this
SELECT pg_is_in_recovery() - returned true = Database has only Read Acces
can you check your permission?
you can check postgresql.conf file and atribute default_transaction_read_only
or try this:
begin;
set transaction read write;
alter database exercises set default_transaction_read_only = off;
commit;
The issue was that our posgtresql machine is a HA machine, and that I was connecting to an IP address rather than the domain.
Related
I am trying to run the following query in pgAdmin:
CREATE DATABASE abc;
CREATE DATABASE xyz;
And I get the following error:
ERROR: current transaction is aborted, commands ignored until end of transaction block
SQL state: 25P02
I'm relatively new to postgres.
With SQL Server it's possible to create multiple databases in a single query with the "GO" statement in between if necessary.
I've tried to google this error, and most answers are to simply run each line separately.
That would work, but I'm curious why this doesn't work.
It may also be a setting in pgAdmin.
The "autocommit" is currently on. I've tried it off, and same result.
I'm using postgres 14.5 (in aws)
I am trying to use pg_cron to schedule calls on stored procedure on several DBs in a Postgres Cloud SQL instance.
Unfortunately it looks like pg_cron can only be only created on postgres DB
When I try to use pg_cron on a DB different than postgres I get this message :
CREATE EXTENSION pg_cron;
ERROR: can only create extension in database postgres
Detail: Jobs must be scheduled from the database configured in
cron.database_name, since the pg_cron background worker reads job
descriptions from this database. Hint: Add cron.database_name =
'mydb' in postgresql.conf to use the current database.
Where: PL/pgSQL function inline_code_block line 4 at RAISE
Query = CREATE EXTENSION pg_cron;
... I don't think I have access to postgresql.conf in Cloud SQL ... is there another way ?
Maybe I could use postgres_fdw to achieve my goal ?
Thank you,
There's no need to edit any files. All you have to do is set the cloudsql.enable_pg_cron flag (see guide) and then create the extension in the postgres database.
You need to log onto the postgres database rather than the one you're using for your app. For me that's just replacing the name of my app database with 'postgres' e.g.
psql -U<username> -h<host ip> -p<port> postgres
Then simply run the create extension command and the cron.job table appears. Here's one I did a few minutes ago in our cloudsql database. I'm using the cloudsql proxy to access the remote db:
127.0.0.1:2345 admin#postgres=> create extension pg_cron;
CREATE EXTENSION
Time: 268.376 ms
127.0.0.1:2345 admin#postgres=> select * from cron.job;
jobid | schedule | command | nodename | nodeport | database | username | active | jobname
-------+----------+---------+----------+----------+----------+----------+--------+---------
(0 rows)
Time: 157.447 ms
Be careful to specify the correct target database when setting the schedule otherwise it will think that you want the job to run in the postgres database
.. I don't think I have access to postgresql.conf in Cloud SQL ...
Actually there is, you can use the patch command.
according to pg_cron doc, you need two change two things in the conf file:
shared_preload_libraries = 'pg_cron'
cron.database_name = 'another_table' #optionnaly to change the database where pg_cron background worker expects its metadata tables to be created
Now, according to gcloud
You need to set up two flags on your instance:
gcloud sql instances patch [my_instance] --database-flags=cloudsql.enable_pg_cron=on,cron.database_name=[my_name]
CAREFUL, don't use twice the command "patch" as you would erase your first setting. Put all your changes in one command
You also might want set cron.database_name in postgresql.conf (or flag in CloudSQL)
cron.database_name = mydatabase
Trying to drop a db from AWS RDS (postgres) is blocked only for superuser (which is reserved to AWS only).
trying to run this command on my instance:
DROP DATABASE "dbname"
results in error:
psycopg2.InternalError: DROP DATABASE cannot run inside a transaction block
I saw this issue in AWS forums, which seems to have been active by a lot of people, but no AWS representative giving a valid solution.
How can I drop my db without taking down the whole instance and raising it again?
Worked for me:
Connect to postgres DB, disconnect from DB you want to DROP!
select pg_terminate_backend(pid) from pg_stat_activity where datname='yourdb';
drop database 'yourdb';
Step 2 and 3 execute fast in order to prevent user rdsadmin reconnect
Try using ISOLATION_LEVEL_AUTOCOMMIT, a psycopg2 extensions:
No transaction is started when command are issued and no commit() or
rollback() is required.
The connection must be in autocommit mode. You can way can set it using psycopg2 is through the autocommit attribute:
import psycopg2
con = psycopg2.connect(...)
con.autocommit = True
cur = con.cursor()
cur.execute('DROP DATABASE db;')
I'm trying to setup the pgexercises data in my local machine. When I run: psql -U <username> -f clubdata.sql -d postgres -x I get the error: psql:clubdata.sql:6: ERROR: cannot execute CREATE SCHEMA in a read-only transaction.
Why did it create a read-only database on my local machine? Can I change this?
Normally the most plausible reasons for this kind of error are :
trying create statements on a read-only replica (the entire instance is read-only).
<username> has default_transaction_read_only set to ON
the database has default_transaction_read_only set to ON
The script mentioned has in its first lines:
CREATE DATABASE exercises;
\c exercises
CREATE SCHEMA cd;
and you report that the error happens with CREATE SCHEMA at line 6, not before.
That means that the CREATE DATABASE does work, when run by <username>.
And it wouldn't work if any of the reasons above was directly applicable.
One possibility that would technically explain this would be that default_transaction_read_only would be ON in the postgresql.conf file, and set to OFF for the database postgres, the one that the invocation of psql connects to, through an ALTER DATABASE statement that supersedes the configuration file.
That would be why CREATE DATABASE works, but then as soon as it connects to a different database with \c, the default_transaction_read_only setting of the session would flip to ON.
But of course that would be a pretty weird and unusual configuration.
Reached out to pgexercises.com and they were able to help me.
I ran these commands(separately):
psql -U <username> -d postgres
begin;
set transaction read write;
alter database exercises set default_transaction_read_only = off;
commit;
\q
Then I dropped the database from the terminal dropdb exercises and ran script again psql -U <username> -f clubdata.sql -d postgres -x -q
I was having getting cannot execute CREATE TABLE in a read-only transaction, cannot execute DELETE TABLE in a read-only transaction and others.
They all followed a cannot execute INSERT in a read-only transaction. It was like the connection had switched itself over to read-only in the middle of my batch processing.
Turns out, I was running out of storage!
Write access was disabled when the database could no longer write anything. I am using Postgres on Azure. I don't know if the same effect would happen if I was on a dedicated server.
I had same issue for Postgre Update statement
SQL Error: 0, SQLState: 25006 ERROR: cannot execute UPDATE in a read-only transaction
Verified Database access by running below query and it will return either true or false
SELECT pg_is_in_recovery()
true -> Database has only Read Access
false -> Database has full Access
if returns true then check with DBA team for the full access and also try for ping in command prompt and ensure the connectivity.
ping <database hostname or dns>
Also verify if you have primary and standby node for the database
In my case I had a master and replication nodes, and the master node became replication node, which I believe switched it into hot_standby mode. So I was trying to write data into a node that was meant only for reading, therefore the "read-only" problem.
You can query the node in question with SELECT pg_is_in_recovery(), and if it returns True then it is "read-only", and I suppose you should switch to using whatever master node you have now.
I got this information from: https://serverfault.com/questions/630753/how-to-change-postgresql-database-from-read-only-to-writable.
So full credit and my thanks goes to Craig Ringer!
Dbeaver: In my case
This was on.
This doesn't quite answer the original question, but I received the same error and found this page, which ultimately led to a fix.
My issue was trying to run a function with temp tables being created and dropped. The function was created with SECURITY DEFINER privileges, and the user had access locally.
In a different environment, I received the cannot execute DROP TABLE in a read-only transaction error message. This environment was AWS Aurora, and by default, non-admin developers were given read-only privileges. Their server connections were thus set up to use the read-only node of Aurora (-ro- is in the connection url), which must put the connection in the read-only state. Running the same function with the same user against the write node worked.
Seems like a good use case for table variables like SQL Server has! Or, at least, AWS should modify their flow to allow temp tables to be created and dropped on read nodes.
This occurred when I was restoring a production database locally, the database is still doing online recovery from the WAL records.
A little bit unexpected as I assumed pgbackgrest was creating instantly recoverable restores, perhaps not.
91902 postgres 20 0 1445256 14804 13180 D 4.3 0.3 0:28.06 postgres: startup recovering 000000010000001E000000A5
If like me you are trying to create DB on heroku and are stuck as this message shows up on the dataclip tab
I did this,
Choose Resources from(Overview Resources Deploy Metrics Activity Access Settings)
Choose Settings out of (Overview, Durability, Settings, Dataclip)
Then in Administration->Database Credentials choose View Credentials...
then open terminal and fill that info here and enter
psql --host=***************.amazonaws.com --port=5432 --username=*********pubxl --password --dbname=*******lol
then it'll ask for password, copy-paste from there and you can run Postgres cmds.
I suddenly started facing this error on postgres installed on my windows machine, when I was running alter query from dbeaver, all I did was deleted the connection of postgres from dbeaver and created a new connection
If you are using Azure Database for PostgreSQL your server gets into read-only mode when the storage used is near total capacity.
The error you get is exactly:
ERROR: cannot execute XXXXXXXXX in a read-only transaction
https://learn.microsoft.com/en-us/azure/postgresql/flexible-server/concepts-compute-storage
I just had this error. My cause was not granting permission to the SEQUENCE
GRANT ALL ON SEQUENCE word_mash_word_cube_template_description_reference_seq TO ronshome_user;
If you are facing this issue with an RDS instance cluster, please check your endpoint and use the Writer instance endpoint. Then it should work now.
Issue can be dur to Intellij config:
Go to Database view> click on Data Source Properties (Shift + enter)> (Select your data source)>
Options tab> Under Connection : uncheck Read-only
For me it was Azure PostgreSQL failing over to standby during maintaince in Azure and never failing back to master when PostgreSQL was in HA mode. You can check this event in Service Health and also check which zone you current VM is running from. If it's 2 and not 1 them most likely that's the result of events described above.
I am beginner to PostgreSQL.
I want to connect to another database from the query editor of Postgres - like the USE command of MySQL or MS SQL Server.
I found \c databasename by searching the Internet, but its runs only on psql. When I try it from the PostgreSQL query editor I get a syntax error.
I have to change the database by pgscripting. Does anyone know how to do it?
When you get a connection to PostgreSQL it is always to a particular database. To access a different database, you must get a new connection.
Using \c in psql closes the old connection and acquires a new one, using the specified database and/or credentials. You get a whole new back-end process and everything.
You must specify the database to use on connect; if you want to use psql for your script, you can use "\c name_database"
user_name=# CREATE DATABASE testdatabase;
user_name=# \c testdatabase
At this point you might see the following output
You are now connected to database "testdatabase" as user "user_name".
testdatabase=#
Notice how the prompt changes. Cheers, have just been hustling looking for this too, too little information on postgreSQL compared to MySQL and the rest in my view.
In pgAdmin you can also use
SET search_path TO your_db_name;
The basic problem while migrating from MySQL I faced was, I thought of the term database to be same in PostgreSQL also, but it is not. So if we are going to switch the database from our application or pgAdmin, the result would not be as expected.
As in my case, we have separate schemas (Considering PostgreSQL terminology here.) for each customer and separate admin schema. So in application, I have to switch between schemas.
For this, we can use the SET search_path command. This does switch the current schema to the specified schema name for the current session.
example:
SET search_path = different_schema_name;
This changes the current_schema to the specified schema for the session. To change it permanently, we have to make changes in postgresql.conf file.
Use this commad when first connect to psql
=# psql <databaseName> <usernamePostgresql>
set search_path = 'schema name here'
while connecting to the postgres, you have to opt for default database to connect. If you have nothing, you can use 'postgres' as default.
You can use dbeaver to connect to postgres. UI is good
PgAdmin 4, GUI Tool: Switching between databases
In the PgAdmin Browser on the left hand side, right click on the database you are willing to switch to.
Select a QueryTool from the drop down menu (or any other option that you need, I will stick with the QueryTool for now).
You will see the QueryTool in the PgAdmin window, and on top you will see the active database and the role name.
Now you can write queries against the chosen database.
You can open multiple QueryTools for multiple database, and work with them as you do with your graphical text editor.
In order to be sure that you are querying the proper database, issue the following query:
SELECT session_user, current_database();