I am trying to select all records where the date (a5) is greater than 2021. I keep getting false results back. I have tried the following.
SELECT * WHERE a5 > "3/02/2021"
SELECT * WHERE a5 > '3/02/2021'
SELECT * WHERE parseInt(a5) > 3/02/2021
I went through the documentation but don't see anything about Date format. Here are my negative results.
You can use Date.parse() function from Javascript e.g.
SELECT * WHERE Date.parse(a5) > Date.parse('3/02/2021') and NR > 1
or (if you click that "Input table has header" checkbox):
SELECT * WHERE Date.parse(a.hireDate) > Date.parse('3/02/2021')
Related
i have a starting table where there are some meteo data stored every 15 minutes, one field stores leaf wet at 1 minute sampling in a numeric array form, thus i have a 15 values array each row.
Now i want to create a 1 hour aggregation of this table, crating an array of 60 values for this field.
I tried array_cat at first place, but says
array_cat(numeric[]) not existing
the function obviuously exists, so i tought the format was not the one expected, i tried first unnesting and then aggregating, not working again.
Finally i was able to aggregate trough string conversion, but it's not what i wanted (i might in the future apply some numeric elaboration oh that 60-values array)
I paste the query for further investigations
SELECT dati1_v.id_stazione,
to_char(dati1_v.data_ora, 'YYYY-MM-DD HH24:00:00'::text) AS date_hour,
round(avg(dati1_v.temp1_media), 2) AS t_avg,
round(avg(dati1_v.ur1_media), 2) AS hum_avg,
sum(dati1_v.pioggia) AS rain_tot,
max(dati1_v.pioggia) AS rain_max,
round((avg((SELECT avg(lw.lw) AS avg FROM unnest(dati1_v.lw_top_array) lw(lw))) - lws.top_min) /
(lws.top_max - lws.top_min) * 100::numeric, 2) AS lw_top_avg,
array_agg((SELECT round((avg(lw.lw) - lws.top_min) / (lws.top_max - lws.top_min) * 100::numeric, 2) AS round
FROM unnest(dati1_v.lw_top_array) lw(lw))) AS lw_top_array,
array_cat(dati1_v.lw_top_array) AS lw_top_array_tot,
-- array_agg((select lw_top_array from unnest(dati1_v.lw_top_array))) AS lw_top_array_tot,
-- array_agg(array_to_string(dati1_v.lw_top_array, ',')) AS lw_top_array_tot,
round((avg((SELECT avg(lw.lw) AS avg FROM unnest(dati1_v.lw_bottom_array) lw(lw))) - lws.bottom_min) /
(lws.bottom_max - lws.bottom_min) * 100::numeric, 2) AS lw_bottom_avg,
array_agg((SELECT round((avg(lw.lw) - lws.bottom_min) / (lws.bottom_max - lws.bottom_min) * 100::numeric,
2) AS round
FROM unnest(dati1_v.lw_bottom_array) lw(lw))) AS lw_bottom_array
FROM dati1_v,
lw_settings lws
WHERE lws.id = 1
GROUP BY dati1_v.id_stazione, to_char(dati1_v.data_ora, 'YYYY-MM-DD HH24:00:00'::text), lws.top_min, lws.top_max,
lws.bottom_min, lws.bottom_max
ORDER BY dati1_v.id_stazione, to_char(dati1_v.data_ora, 'YYYY-MM-DD HH24:00:00'::text)
in particular, my tries were related to this specific block:
array_cat(dati1_v.lw_top_array) AS lw_top_array_tot,
-- array_agg((select lw_top_array from unnest(dati1_v.lw_top_array))) AS lw_top_array_tot,
-- array_agg(array_to_string(dati1_v.lw_top_array, ',')) AS lw_top_array_tot
Thanks
For me in similar case helped UNNEST in subquery and ARRAY_AGG of unnnested
SELECT
ARRAY_AGG(
DISTINCT lw_top
) as lw_top_array
FROM (
SELECT
UNNEST(lw_top_array) AS lw_top
FROM
dati1_v
) as tmp;
for me helped next query
SELECT
my_table.key,
array_agg(_unnested.item) as array_coll
from my_table
left join LATERAL (SELECT unnest(my_table.array_coll) as item) _unnested ON TRUE
GROUP by my_table.key
In PostgreSQL, the Group_concat function is not available but you can get similar result as string_agg and array_to_string.
string_agg(array_to_string(file_ids, ','), ',') filter ( where file_ids notnull ) AS file_ids_str
array_to_string and array_to_string works in next way
array_to_string([1, 2, 456], ',') => '1,2,456'
string_agg(['a', 'ab'], ',') => 'a,ab'
the only problem is that result is string with ',' as separator
I've got a query:
SELECT < column names >
INTO <#temp_table>
FROM < table >
WHERE < stuff >
It runs fine in dbVisualizer. However, running it in Oracle SQL Developer gives me the error "The executeQuery method must return a result set."
What is happening here, and how can I fix it in SQL Developer?
EDIT: In response to Tanner, I get the errors when I try the following things (tell me if something I try is invalid. I'm new to SQL):
This:
select * into #temp_table from status
produces this:
The executeQuery method must return a result set.
This:
select * into #temp_table from status;
select * from #temp_table;
produces this:
Invalid object name '#temp_table'.
And this:
select *
from(
select * into #temp_table from status)
produces this:
Incorrect syntax near the keyword 'into'.
I'm lost, ladies and gentledudes.
If you have a query like:
SELECT *
INTO #TEMP
FROM TABLE_A
That is simply creating and inserting data into a temp table.
What you need to do is return that temp table, so after you have run that code you need to do this:
SELECT *
FROM #TEMP
Here's a simple query we do for ad hoc requests from our Marketing department on the leads we received in the last 90 days.
SELECT ID
,FIRST_NAME
,LAST_NAME
,ADDRESS_1
,ADDRESS_2
,CITY
,STATE
,ZIP
,HOME_PHONE
,MOBILE_PHONE
,EMAIL_ADDRESS
,ROW_ADDED_DTM
FROM WEB_LEADS
WHERE ROW_ADDED_DTM BETWEEN #START AND #END
They are asking for more derived columns to be added that show the number of previous occurences of ADDRESS_1 where the EMAIL_ADDRESS matches. But they want is for different date ranges.
So the derived columns would look like this:
,COUNT_ADDRESS_1_LAST_1_DAYS,
,COUNT_ADDRESS_1_LAST_7_DAYS
,COUNT_ADDRESS_1_LAST_14_DAYS
etc.
I've manually filled these derived columns using update statements when there was just a few. The above query is really just a sample of a much larger query with many more columns. The actual request has blossomed into 6 date ranges for 13 columns. I'm asking if there's a better way then using 78 additional update statements.
I think you will have a hard time writing a query that includes all of these 78 metrics per e-mail address without actually creating a query that hard-codes the different choices. However you can generate such a pivot query with dynamic SQL, which will save you some keystrokes and will adjust dynamically as you add more columns to the table.
The result you want to end up with will look something like this (but of course you won't want to type it):
;WITH y AS
(
SELECT
EMAIL_ADDRESS,
/* aggregation portion */
[ADDRESS_1] = COUNT(DISTINCT [ADDRESS_1]),
[ADDRESS_2] = COUNT(DISTINCT [ADDRESS_2]),
... other columns
/* end agg portion */
FROM dbo.WEB_LEADS AS wl
WHERE ROW_ADDED_DTM >= /* one of 6 past dates */
GROUP BY wl.EMAIL_ADDRESS
)
SELECT EMAIL_ADDRESS,
/* pivot portion */
COUNT_ADDRESS_1_LAST_1_DAYS = *count address 1 from 1 day ago*,
COUNT_ADDRESS_1_LAST_7_DAYS = *count address 1 from 7 days ago*,
... other date ranges ...
COUNT_ADDRESS_2_LAST_1_DAYS = *count address 2 from 1 day ago*,
COUNT_ADDRESS_2_LAST_7_DAYS = *count address 2 from 7 days ago*,
... other date ranges ...
... repeat for 11 more columns ...
/* end pivot portion */
FROM y
GROUP BY EMAIL_ADDRESS
ORDER BY EMAIL_ADDRESS;
This is a little involved, and it should all be run as one script, but I'm going to break it up into chunks to intersperse comments on how the above portions are populated without typing them. (And before long #Bluefeet will probably come along with a much better PIVOT alternative.) I'll enclose my interspersed comments in /* */ so that you can still copy the bulk of this answer into Management Studio and run it with the comments intact.
Code/comments to copy follows:
/*
First, let's build a table of dates that can be used both to derive labels for pivoting and to assist with aggregation. I've added the three ranges you've mentioned and guessed at a fourth, but hopefully it is clear how to add more:
*/
DECLARE #d DATE = SYSDATETIME();
CREATE TABLE #L(label NVARCHAR(15), d DATE);
INSERT #L(label, d) VALUES
(N'LAST_1_DAYS', DATEADD(DAY, -1, #d)),
(N'LAST_7_DAYS', DATEADD(DAY, -8, #d)),
(N'LAST_14_DAYS', DATEADD(DAY, -15, #d)),
(N'LAST_MONTH', DATEADD(MONTH, -1, #d));
/*
Next, let's build the portions of the query that are repeated per column name. First, the aggregation portion is just in the format col = COUNT(DISTINCT col). We're going to go to the catalog views to dynamically derive the list of column names (except ID, EMAIL_ADDRESS and ROW_ADDED_DTM) and stuff them into a #temp table for re-use.
*/
SELECT name INTO #N FROM sys.columns
WHERE [object_id] = OBJECT_ID(N'dbo.WEB_LEADS')
AND name NOT IN (N'ID', N'EMAIL_ADDRESS', N'ROW_ADDED_DTM');
DECLARE #agg NVARCHAR(MAX) = N'', #piv NVARCHAR(MAX) = N'';
SELECT #agg += ',
' + QUOTENAME(name) + ' = COUNT(DISTINCT '
+ QUOTENAME(name) + ')' FROM #N;
PRINT #agg;
/*
Next we'll build the "pivot" portion (even though I am angling for the poor man's pivot - a bunch of CASE expressions). For each column name we need a conditional against each range, so we can accomplish this by cross joining the list of column names against our labels table. (And we'll use this exact technique again in the query later to make the /* one of past 6 dates */ portion work.
*/
SELECT #piv += ',
COUNT_' + n.name + '_' + l.label
+ ' = MAX(CASE WHEN label = N''' + l.label
+ ''' THEN ' + QUOTENAME(n.name) + ' END)'
FROM #N as n CROSS JOIN #L AS l;
PRINT #piv;
/*
Now, with those two portions populated as we'd like them, we can build a dynamic SQL statement that fills out the rest:
*/
DECLARE #sql NVARCHAR(MAX) = N';WITH y AS
(
SELECT
EMAIL_ADDRESS, l.label' + #agg + '
FROM dbo.WEB_LEADS AS wl
CROSS JOIN #L AS l
WHERE wl.ROW_ADDED_DTM >= l.d
GROUP BY wl.EMAIL_ADDRESS, l.label
)
SELECT EMAIL_ADDRESS' + #piv + '
FROM y
GROUP BY EMAIL_ADDRESS
ORDER BY EMAIL_ADDRESS;';
PRINT #sql;
EXEC sp_executesql #sql;
GO
DROP TABLE #N, #L;
/*
Now again, this is a pretty complex piece of code, and perhaps it can be made easier with PIVOT. But I think even #Bluefeet will write a version of PIVOT that uses dynamic SQL because there is just way too much to hard-code here IMHO.
*/
I wish to write a Query for SAP B1 (t-sql) that will list all Income and Expenses Items by total and month by month.
I have successfully written a Query using PIVOT, but I do not want the column headings to be hardcoded like: Jan-11, Feb-11, Mar-11 ... Dec-11.
Rather I want the column headings to be parametrically generated, so that if I input:
--------------------------------------
Query - Selection Criteria
--------------------------------------
Posting Date greater or equal 01.09.10
Posting Date smaller or equal 31.08.11
[OK] [Cancel]
the Query will generate the following columns:
Sep-10, Oct-10, Nov-10, ..... Aug-11
I guess DYNAMIC PIVOT can do the trick.
So, I modified one SQL obtained from another forum to suit my purpose, but it does not work. The error message I get is Incorrect Syntax near 20100901.
Could anybody help me locate my error?
Note: In SAP B1, '[%1]' is an input variable
Here's my query:
/*Section 1*/
DECLARE #listCol VARCHAR(2000)
DECLARE #query VARCHAR(4000)
-------------------------------------
/*Section 2*/
SELECT #listCol =
STUFF(
( SELECT DISTINCT '],[' + CONVERT(VARCHAR, MONTH(T0.RefDate), 102)
FROM JDT1
FOR XML PATH(''))
, 1, 2, '') + ']'
------------------------------------
/*Section 3*/
SET #query = '
SELECT * FROM
(
SELECT
T0.Account,
T1.GroupMask,
T1.AcctName,
MONTH(T0.RefDate) as [Month],
(T0.Debit - T0.Credit) as [Amount]
FROM dbo.JDT1 T0
JOIN dbo.OACT T1 ON T0.Account = T1.AcctCode
WHERE
T1.GroupMask IN (4,5,6,7) AND
T0.[Refdate] >= '[%1]' AND
T0.[Refdate] <= '[%2]'
) S
PIVOT
(
Sum(Amount)
FOR [Month] IN ('+#listCol+')
) AS pvt
'
--------------------------------------------
/*Section 4*/
EXECUTE (#query)
I don't know SAP, but a couple of things spring to mind:
It looks like you want #listCol to contain a collection of numbers within square brackets, for example [07],[08],[09].... However, your code appears not to put a [ at the start of this string.
Try replacing the lines
T0.[Refdate] >= '[%1]' AND
T0.[Refdate] <= '[%2]'
with
T0.[Refdate] >= ''[%1]'' AND
T0.[Refdate] <= ''[%2]''
(I also added a space before the AND in the first of these two lines while I was editing your question.)
Why doesn't this work (when parameter is set to 1) :
SELECT * FROM TABLE WHERE TIMESTAMPFIELD > (CURRENT_TIMESTAMP - ?)
But this works :
SELECT * FROM TABLE WHERE TIMESTAMPFIELD > (CURRENT_TIMESTAMP - 1)
I get error message: "conversion error from string "39723.991882951" "
I'm using Firebird 2.1
EDIT:
I found the answer myself with a little help:
SELECT * FROM TABLE WHERE TIMESTAMPFIELD > (CURRENT_TIMESTAMP - CAST(? as DECIMAL(18,9))
Works if the parameter is given as float value.
What do you want to do exactly? Maybe I can be more helpfull with more details.
SELECT * FROM TABLE WHERE TIMESTAMPFIELD > (CURRENT_TIMESTAMP - ?)
How do you set your parameter in your code? Which language do you use?
If you use Delphi, then your parameter should be passed as Float. Ie:
MyQuery.ParamByName('delta').asFloat := 0.1;
Try this and tell us if it's working
HTH