TRADE open and close in the same time - pine-script-v5

in the following strategy all time (trades) open and close in the same time, so I pay only fees.
I have written to tradingview assistance, they have said me (and send) to put OPEN LONG and CLOSE LONG (the first 2 lines in strategy).
But I still have the same problem, I don't know why.
All test are ok, I think that problem is with TRAIDINGVIEW HUB, but I am not scure.
Thanks for your attention and time
strategy V5
Open Long:
{"pair":"BTCUSDT","unitsPercent":"50","unitsType":"percentWallet","exchange":"Bybit","apiKey":"TradingView BYBIT ACC AFF","token":"7dfa66d6-5b94-4047-a11c-e8bdd0f1c0f4","isBuy":true,"isMarket":false,"leverage":"5","marginType":"ISOLATED","closeCurrentPosition":true,"delay":"10"}
Close Long:
{"pair":"BTCUSDT","unitsPercent":"50","exchange":"Bybit","apiKey":"TradingView BYBIT ACC AFF","token":"7dfa66d6-5b94-4047-a11c-e8bdd0f1c0f4","isClose":true,"delay":"10"}
strategy(title='Take profit (% of instrument price)', overlay=true, pyramiding=1)
// STEP 1:
// Make inputs that set the take profit % (optional)
FastPeriod = input.int(title='Fast MA Period', defval=18, minval=1, group='Moving Average')
SlowPeriod = input.int(title='Slow MA Period', defval=20, minval=1, group='Moving Average')
TPPerc = input.float(title='Long Take Profit (%)', minval=0.0, step=0.5, defval=0.9, group='TP & SL')
SLPerc = input.float(title='Long Stop Loss (%)', minval=0.0, step=0.1, defval=4, group='TP & SL')
TP_Ratio = input.float(title='Sell Postion Size % # TP', defval=100, step=1, group='TP & SL', tooltip='Example: 100 closing 100% of the position once TP is reached') / 100
// Calculate moving averages
fastSMA = ta.sma(close, FastPeriod)
slowSMA = ta.sma(close, SlowPeriod)
// Calculate trading conditions
enterLong = ta.crossover(fastSMA, slowSMA)
// Plot moving averages
plot(series=fastSMA, color=color.new(color.green, 0), title='Fase MA')
plot(series=slowSMA, color=color.new(color.red, 0), title='Slow MA')
// STEP 2:
// Figure out take profit price
percentAsPoints(pcnt) =>
strategy.position_size != 0 ? math.round(pcnt / 100.0 * strategy.position_avg_price / syminfo.mintick) : float(na)
percentAsPrice(pcnt) =>
strategy.position_size != 0 ? (pcnt / 100.0 + 2.0) * strategy.position_avg_price : float(na)
current_position_size = math.abs(strategy.position_size)
initial_position_size = math.abs(ta.valuewhen(strategy.position_size[1] == 0.0, strategy.position_size, 0))
TP = strategy.position_avg_price + percentAsPoints(TPPerc) * syminfo.mintick * strategy.position_size / math.abs(strategy.position_size)
SL = strategy.position_avg_price - percentAsPoints(SLPerc) * syminfo.mintick * strategy.position_size / math.abs(strategy.position_size)
// Submit entry orders
if enterLong
strategy.entry(id='Long', direction=strategy.long)
// STEP 3:
// Submit exit orders based on take profit price
if strategy.position_size > 0
strategy.exit('TP', from_entry='Long', qty=initial_position_size * TP_Ratio, limit=TP, stop=SL)
// Plot take profit values for confirmation
plot(series=strategy.position_size > 0 ? TP : na, color=color.new(color.green, 0), style=plot.style_circles, linewidth=1, title='Take Profit 1')
plot(series=strategy.position_size > 0 ? SL : na, color=color.new(color.red, 0), style=plot.style_circles, linewidth=1, title='Stop Loss')

Related

Compare bool and float to determine plot (pine script v5)

You folks helped me with another part of this script and I'm making good progress. However, I'm stuck again.
I added a code to produce a dynamic overbought/oversold line on the indicator. That part works great. Now, I'm wanting to add a plotshape when conditions are met to signal long or short. Unfortunately, I can't figure out how to compare a bool variable and a float variable. The dynamic OB/OS lines are floats. The crossover lines are bool.
What I want is for the (green/long) shape to plot when a crossover happens below the dynamic oversold line and the (red/short) shape to plot when the crossunder happens above the dynamic overbought line.
I've tried all kinds of things (var, loop with "while" using sb value as a trigger). I either break the code or I get every crossover plotted. Here is what I have that is stable. I took all my junk that didn't work out:
// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © HammerGeek
//#version=5
indicator('Impulse MACD [HammerGeek - LazyBear]', shorttitle='IMACD_HG_LB', overlay=false)
lengthMA = input(34)
lengthSignal = input(9)
//OverBought = input.float(0.1)
//OverSold = input.float(-0.1)
calc_smma(src, len) =>
smma = 0.0
sma_1 = ta.sma(src, len)
smma := na(smma[1]) ? sma_1 : (smma[1] * (len - 1) + src) / len
smma
calc_zlema(src, length) =>
ema1 = ta.ema(src, length)
ema2 = ta.ema(ema1, length)
d = ema1 - ema2
ema1 + d
src = hlc3
hi = calc_smma(high, lengthMA)
lo = calc_smma(low, lengthMA)
mi = calc_zlema(src, lengthMA)
md = mi > hi ? mi - hi : mi < lo ? mi - lo : 0
sb = ta.sma(md, lengthSignal)
sh = md - sb
mda = ta.sma(md, lengthSignal)
OverBoughtLine = ta.highest(sb * 0.5, lengthMA*100)
OverSoldLine = ta.lowest(sb * 0.5, lengthSignal*100)
shsbCrossOver = ta.crossover(md, sb)
shsbCrossUnder = ta.crossunder(md, sb)
//mdc = src > mi ? src > hi ? color.lime : color.green : src < lo ? color.red : color.orange
mdc = color.green
plot(0, color=color.new(color.gray, 0), linewidth=1, title='MidLine')
plot(md, color=mdc, linewidth=2, title='ImpulseMACD', style=plot.style_line)
plot(sh, color=color.rgb(122, 5, 168, 40), linewidth=2, title='ImpulseHisto', style=plot.style_area)
plot(sb, color=color.rgb(255, 255, 255, transp = 40), linewidth=2, title='ImpulseMACDCDSignal')
plot(OverBoughtLine, color=color.new(#f3e032, 0), linewidth=1, title = 'Overbought Line')
plot(OverSoldLine, color=color.new(color.yellow, 0), linewidth=1, title = 'Oversold Line')
plotshape(shsbCrossOver, "LONG", shape.triangleup, location.bottom, color.new(color.green, 0))
plotshape(shsbCrossUnder, "SHORT", shape.triangledown, location.top, color.new(#cd0808, 0))
//ebc = input(false, title='Enable bar colors')
//barcolor(ebc ? mdc : na)
You cannot compare a bool with a float. It doesn't make any sense and it is not legal in pinescript.
What I want is for the (green/long) shape to plot when a crossover
happens below the dynamic oversold line and the (red/short) shape to
plot when the crossunder happens above the dynamic overbought line.
You want to check if the values you use in that crossover is under your dynamic oversold line at the time of crossover.
OverSoldLine = ta.lowest(sb * 0.5, lengthSignal*100)
shsbCrossOver = ta.crossover(md, sb)
is_good = shsbCrossOver and (md < OverSoldLine) and (sb < OverSoldLine)

Change RSI Plot Range - Possible or not?

We know that RSI plotting range is between 0 to 100.
Is it possible to change a plotted indicator line so that it will fluctuate in an extended range, say -50 to 100 ?
In simple way I want it to be (stretched) so I can easily draw trend line on the RSI line.
Attached photo is sample of what I mean on is perfect , one that I have is not like it.
I want the the RSI to cross the green and red area without affecting the movement of the indicator. I just want it to be stretching.
enter image description here
enter image description here
//#version=5
indicator(title="Relative Strength Index", shorttitle="RSI", format=format.price, precision=2, timeframe="", timeframe_gaps=true)
ma(source, length, type) =>
switch type
"SMA" => ta.sma(source, length)
"Bollinger Bands" => ta.sma(source, length)
"EMA" => ta.ema(source, length)
"SMMA (RMA)" => ta.rma(source, length)
"WMA" => ta.wma(source, length)
"VWMA" => ta.vwma(source, length)
rsiLengthInput = input.int(14, minval=1, title="RSI Length", group="RSI Settings")
rsiSourceInput = input.source(close, "Source", group="RSI Settings")
maTypeInput = input.string("SMA", title="MA Type", options=["SMA", "Bollinger Bands", "EMA", "SMMA (RMA)", "WMA", "VWMA"], group="MA Settings")
maLengthInput = input.int(50, title="MA Length", group="MA Settings")
up = ta.rma(math.max(ta.change(rsiSourceInput), 0), rsiLengthInput)
down = ta.rma(-math.min(ta.change(rsiSourceInput), 0), rsiLengthInput)
rsi = down == 0 ? 100 : up == 0 ? 0 : 100 - (100 / (1 + up / down))
rsiMA = ma(rsi, maLengthInput, maTypeInput)
rsicolor = rsi > 70 ? color.new(#ff0057, 0) : rsi < 30 ? color.new(#ff0057, 0) : #1056ee
plot(rsi, "RSI", color=rsicolor, linewidth=2, style=plot.style_stepline)
plot(rsiMA, "RSI-based MA", color=color.rgb(120, 206, 255))
OverBought1 = input.int(80, minval=1)
OverBought2 = input.int(90, minval=1)
OverSold1 = input.int(20, minval=1)
OverSold2 = input.int(10, minval=1)
OB1 = hline(OverBought1 , color=color.red, linestyle=hline.style_dashed)
OB2 = hline(OverBought2 , color=color.red, linestyle=hline.style_dashed)
OS1 = hline(OverSold1 , color=color.green, linestyle=hline.style_dashed)
OS2 = hline(OverSold2 , color=color.green, linestyle=hline.style_dashed)
fill(OB1 , OB2, color=color.rgb(255, 82, 82, 80), title="Red Zoon Fill")
fill(OS1 , OS2 , color=color.rgb(76, 175, 79, 80), title="Green Zoon Fill")
Any ideas, please?
Thank you!
Colin
Is it possible to change a plotted indicator line so that it will fluctuate in an extended range, say -50 to 100 ?
In simple way I want it to be (stretched) so I can easily draw trend line on the RSI line.
Attached photo is sample of what I mean on is perfect , one that I have is not like it.
I want the the RSI to cross the green and red area without affecting the movement of the indicator. I just want it to be stretching.
You can use normalize() function:
//#version=5
indicator("My script")
normalize(_src, _min, _max) =>
// Normalizes series with unknown min/max using historical min/max.
// _src : series to rescale.
// _min, _min: min/max values of rescaled series.
var _historicMin = 10e10
var _historicMax = -10e10
_historicMin := math.min(nz(_src, _historicMin), _historicMin)
_historicMax := math.max(nz(_src, _historicMax), _historicMax)
_min + (_max - _min) * (_src - _historicMin) / math.max(_historicMax - _historicMin, 10e-10)
rsi = ta.rsi(close, 20)
rsiNormalized = normalize(rsi, -50, 100)
plot(rsiNormalized)
hline(-50)
hline(100)
EDIT
In your case, since we know the scale will always be between 0 to 100, we can use math to solve the issue much more accurately:
//#version=5
indicator("My script")
rsi = ta.rsi(close, 20) // this will give a value between 0 to 100
// find the value compared to a scale of 100
rsiPerc = rsi / 100
// multiply by the new range to get the position of rsi on the new range
rsiOnNewScale = rsiPerc * 150
// place the newRsi on a scale of -50 to 100
newRsi = rsiOnNewScale - 50
plot(newRsi)
hline(-50)
hline(100)
Or in short:
//#version=5
indicator("My script")
rsi = ta.rsi(close, 20) // this will give a value between 0 to 100
newRsi = (rsi / 100 * 150) - 50
plot(newRsi)
hline(-50)
hline(100)

Strategy ATR TP/SL target doesn't stay 'locked' to my entry readings

I want a strategy to Take Profit/Stop Loss to be based on the ATR (plus multiplier). However, I want it to be whatever the readings were at the point of entry, not simply the last candle (which is what it seems to be doing). Weird thing is that I have other strategies that use this approach, and they seem fine, so I'm really stumped by what I'm doing wrong.
Any help would be much appreciated!
// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// © dave-browning
//#version=5
strategy("Dead-Cat Bounce", overlay = true, initial_capital = 1000, default_qty_value = 100, default_qty_type = strategy.percent_of_equity, currency = currency.GBP, commission_value = 0.05, use_bar_magnifier = true)
trendEMAlength = input.int(130, "Trend EMA Length")
fastSMALength = input.int(14, "Fast SMA Length")
tpATRmultiplyer = input.float(6.2, "Short TP ATR Multiplier")
slATRmultiplier = input.float(4, "Short SL ATR Multiplier")
//Trade Conditions
shortCondition = close > ta.sma(close, fastSMALength) and close < ta.ema(close, length=trendEMAlength)
notInTrade = strategy.position_size <= 0
atr = ta.atr(14)
ema=ta.ema(close, trendEMAlength)
plot(ta.sma(close,length=fastSMALength), color=color.blue, linewidth = 2)
plot(ta.ema(close, length=trendEMAlength), color=color.yellow, linewidth = 4)
plot(low - (atr * tpATRmultiplyer), color=color.green)
plot(high + (atr * slATRmultiplier), color=color.red)
if shortCondition and notInTrade
stopLoss = (high + (atr * slATRmultiplier))
takeProfit = (low - (atr * tpATRmultiplyer))
strategy.entry("Short", strategy.short)
strategy.exit("Short Exit", "Short", limit=takeProfit, stop=stopLoss)

draw line and color the area above in indicator in Trading View with Pine Script

I want to draw a horizontal line at fixed value 30.000 and color the area above in light green in the DMI Indicator. How is this possible?
Thanks
//#version=5
indicator(title="Directional Movement Index", shorttitle="DMI", format=format.price, precision=4, timeframe="", timeframe_gaps=true)
lensig = input.int(14, title="ADX Smoothing", minval=1, maxval=50)
len = input.int(14, minval=1, title="DI Length")
up = ta.change(high)
down = -ta.change(low)
plusDM = na(up) ? na : (up > down and up > 0 ? up : 0)
minusDM = na(down) ? na : (down > up and down > 0 ? down : 0)
trur = ta.rma(ta.tr, len)
plus = fixnan(100 * ta.rma(plusDM, len) / trur)
minus = fixnan(100 * ta.rma(minusDM, len) / trur)
sum = plus + minus
adx = 100 * ta.rma(math.abs(plus - minus) / (sum == 0 ? 1 : sum), lensig)
plot(adx, color=#F50057, title="ADX")
plot(plus, color=#2962FF, title="+DI")
plot(minus, color=#FF6D00, title="-DI")
You can use the hline and fill functions
https://www.tradingview.com/pine-script-reference/v5/#fun_fill
https://www.tradingview.com/pine-script-reference/v5/#fun_hline
hline(30, title = "30 Line", color=color.blue, linestyle=hline.style_solid, linewidth=2)
fill(30, 100, color = color.new(color.green, 90))

Pine Script - Tradingview Draw a daily rectangle

I'm working on a TradingView script (Pine) and I would to develop a simply script that draw a rectangle from a start of current day to the end based on my current timeframe from Monday To Friday...
Example: First rectangle drawed from 24/03/2021 to 25/03/2021, Second Rectangle drawed from 25/03/2021 to 26/03/2021, etc...
Any solutions to achieve this result?
Thank's in advance
I think I have understood your request. The below should help assist you
//#version=4
study("Daily Box", overlay=true)
Bottom = input(title="Bottom", type=input.session, defval="0000-2359:1234567")
colourcheck = 1.0
boxheight = input(title="Box Height", type=input.float, defval=3)
DailyHigh = security(syminfo.tickerid, "D", high, lookahead=true)
DailyLow = security(syminfo.tickerid, "D", low, lookahead=true)
dayrange = DailyHigh - DailyLow
BottomLowBox = DailyLow + (dayrange * 0.01 * boxheight)
TopLowBox = DailyHigh - (dayrange * 0.01 * boxheight)
BarInSession(sess) => time(timeframe.period, sess) != 0
//ASIA
BottomL = plot(DailyLow and BarInSession(Bottom) ? DailyLow : na, title="Bottom High", style=plot.style_linebr, linewidth=3, color=na)
TopL = plot(DailyHigh and BarInSession(Bottom) ? DailyHigh : na, title="Bottom Low", style=plot.style_linebr, linewidth=3, color=na)
fill(BottomL, TopL, color=color.purple, title="Fill Box", transp=50)