I'm trying to remove obsolete entries from my lingui catalogs by using lingui extract --clean. However, the catalogs contain entries that I added by hand, which get removed by this as well. For code like this i18n._("myI18nEntryKey") I added entries like this:
"myI18nEntryKey": {
"translation": "my entry value",
"obsolete": true
}
Is there a way to preserve them or a better workflow for having both auto-detected i18n entries and manually defined ones? Maybe two catalogs compiled into one?
Related
Years ago, I wrote a small app in itext2 to gather reports on a weekly basis and concatenate them into one PDF. The app used com.lowagie.text.pdf.PdfCopy to copy and merge the PDFs. And it worked fine. Performed exactly as expected.
A few weeks ago I looked into migrating the application to itex7. To that end, I used the copyPagesTo method of com.itextpdf.kernel.pdf.PdfDocument. When run on the same file set, this produces warnings like:
WARN PdfNameTree - Name "section.1" already exists in the name tree; old value will be replaced by the new one.
When I click on the link to "section.1" in the first document of the merged PDF, I am taken to "section.1" of the last document. Not what I expected and not what happens when using the itext2 app. In the PDF's produced by itext2, if I click on the link to "section.1" of the first document in the combined PDF, I am taken to section 1 of the first document.
There is a hint in Javadocs for copyPagesTo saying
If outlines destination names are the same in different documents, all
such outlines will lead to a single location in the resultant
document. In this case iText will log a warning. This can be avoided
by renaming destinations names in the source document.
There is however, no explanation of how this should be done. I find it odd that this should be necessary in itext7, although it wasn't in itext2.
Is there a simple way to get around his problem?
I've also tried the Sejda desktop app and it produces correct results, but I would prefer to automate the process through a batch script.
My guess is iText 2 didn't even know it might be a problem.
If iText can't deduplicate destination names, the procedure is roughly:
Follow /Catalog -> /Names -> /Dests in each document to find the destination name tree.
Deduplicate the names, by adding suffixes. Remember that a name with a suffix added might be equal to an existing name in the same or another document. Be careful!
Now you can rewrite the destination name trees. Since you have only used suffixes, you can do this in place - the lexicographic ordering of the names is unaltered so the search tree structure is not broken.
Now, rewrite destination links in each PDF for the new names. For example any dictionary entry with key /Dest, or any /D in a /GoTo action.
Now, after all this preprocessing, the files will merge without name clashes.
(I know all this because I've just implemented it for my own PDF software. It's slightly hairy stuff, but not intractable.)
If you like, I can provide a devel version of cpdf with this functionality, if you would like to test it.
I am attempting to remove all references of a managed package that is going to be uninstalled that spans throughout code base in VS Code
I have using a query to find the field permissions but am wondering if there is a way to search for the reference outside of specifying the exact field name compared to the field containing only "agf" since they are all using it.
Below is the search query:
<fieldPermissions>
<editable>false</editable>
<field>User.agf_Certified_Product_Owner__c</field>
<readable>false</readable>
</fieldPermissions>
In the field, I want to be able to find and delete the 5 associated lines from multiple files if they match "agf" in any combination. Something like the below:
<fieldPermissions>
<editable>false</editable>
<field>agf</field>
<readable>false</readable>
</fieldPermissions>
With any combination of agf in the field, delete all from any file it appears in.
Not an answer but too long for a comment
You don't have to? Profiles/perm sets don't block package's delete. Probably neither do reports.
You'd use your time better by searching for all instances of agf__ (that's with double underscore), should find fields, objects... used in classes, flows, page layouts etc. And search for agf. (with dot) should find all instances where your Apex code calls their classes marked as global.
Alternatively Apex / VF pages with dependencies on package will have it listed in their "meta.xml", for example
<?xml version="1.0" encoding="UTF-8"?>
<ApexClass xmlns="http://soap.sforce.com/2006/04/metadata">
<apiVersion>54.0</apiVersion>
<packageVersions>
<majorNumber>236</majorNumber>
<minorNumber>1</minorNumber>
<namespace>SBQQ</namespace>
</packageVersions>
<status>Active</status>
</ApexClass>
Last but not least - why not just spawn a dev sandbox and attempt the delete there? If it succeeds - great. If not - it'll list the dependencies that blocked the delete. It'll be "the real thing", it'll smite you even if your VSCode project doesn't contain all flows, layouts and thus could lull you into false sense of security. I'd seriously do it in sandbox and then run all tests for good measure, just in case there are some dynamic soql queries that don't count as hard, delete-blocking references.
After delete's done - fetch Profiles / Permsets from this org and the field references will be gone from the xml.
I have a Windows Forms .NET application in Visual Studio. Making a form "Localizable" adds a Form1.resx file nested below the form. I also want to add a separate .resx file for each form (Form1Resources.resx). This is used for custom form-specific resources, e.g. messages generated using the code behind.
This is set up as follows:
It would be tidier to nest the custom .resx file beneath the form (see this question for details about nest how to do this), as follows:
However, this results in the following error when I build the application:
Two output file names resolved to the same output path:
"obj\Debug\WindowsFormsApp1.Form1.resources" WindowsFormsApp1
I'm guessing that MSBuild uses some logic to find nested .resx files and generate .resources file based on its parent. Is there any way that this can be resolved?
Note that it is not possible to add custom messages to the Form1.resx file - this is for design-specific resources only and any resources that you add get overwritten when you save changes in design mode.
The error comes from the GenerateResource task because the 2 resx files (EmbeddedResource items in msbuild) passed both have the same ManifestResourceName metadata value. That values gets created by the CreateManifestResourceNames task and assumingly when it sees an EmbeddedResource which has the DependentUpon metadata set (to Form1.cs in your case) it always generates something of the form '$(RootNamespace).%(DependentUpon)': both your resx files end up with WindowsFormsApp1.Form1 as ManifestResourceName. Which could arguably be treated as the reason why having all resx files under Form1 is not tidier: it's not meant for it, requires extra fiddling, moreover it could be confusing for others since they'd typcially expect to contain the resx fils placed beneath a form to contain what it always does.
Anyway: there's at least 2 ways to work around this:
there's a Target called CreateCustomManifestResourceNames which is meant to be used for custom ManifestResourceName creation. A bit too much work for your case probably, just mentioning it for completeness
manually declare a ManifestResourceName yourself which doesn't clash with the other(s); if the metadata is already present it won't get overwritten by
Generic code sample:
<EmbeddedResource Include="Form1Resources.resx">
<DependentUpon>Form1.cs</DependentUpon>
<ManifestResourceName>$(RootNamespace).%(FileName)</ManifestResourceName>
...
</EmbeddedResource>
In an 6.2.26 installation we have the following problem:
an editor wants to delete a file, which is not used any more.
if I click on the delete icon I primary get the warning about 3 references while in the list only 2 are shown:
if I agree I get the error message:
Trying to identify the problem in the database results in strange findings.
The data is no straight include but a two level IRRE construct (#1) and there once were workspaces installed (meanwhile removed)
so there are two references shown in the file list module we can only find one reference (or two references in case of the file with the shown four references)
the mm-records are deleted (deleted = 1) and show usage of workspaces (t3ver_id = 1, t3ver_label = 'First draft version')
after removing of these records and following cleanup-task (Dateiabstraktionsschicht: Speicherindex aktualisieren (scheduler)) there were no differences in the list or count of the references
How can we cleanup the database?
how can the editor delete the file?
(#1)
tt_content
+-(IRRE)-> tx_downloadlinks_domain_model_downloadbox
+-(IRRE)-> tx_downloadlinks_domain_model_links
+-> sys_file_references
+-> sys_file
These are probably references in sys_ref. Try to update the sys_ref table. Is one of the low-level cli commands
For example, instead of writing the following:
element * .../my_branch_01/LATEST
element * .../base_branch/LATEST -mkbranch my_branch_01
I would want to write something like this:
MY_BRANCH=my_branch_01
element * .../%MY_BRANCH%/LATEST
element * .../base_branch/LATEST -mkbranch %MY_BRANCH%
Is this even possible? What is the correct syntax?
The only native way to do this in ClearCase is to use attribute within a config-spec.
According to the version selector rules, you can make a "selection by query" rule, based for instance on an attribute:
element * ...{MY_ATTRIBUTE_NAME=="aValue"}
would select the LATEST version on any branch with an attribute 'MY_ATTRIBUTE_NAME' with 'aValue' in it.
That mean you need to change the attribute value on the old branch, put it on the new branch, 'cleartool setcs' your view again, and you should have a new content based on a new version selection.
Not very straight forward, but it could work, except for the mkbranch part (which needs a fixed name).
Regarding GeekCyclist's answer, a few comments:
The solution to include a common config spec can work for Base ClearCase solution, but:
need to be in a share available by all concerned developer
the setcs is indeed necessary to Ccuses the view_server to flush its caches and reevaluate the current config spec, which is stored in file config_spec in the view storage directory. This includes:
Evaluating time rules with nonabsolute specifications (for example, now, Tuesday)
Reevaluating –config rules, possibly selecting different derived objects than previously
Re-reading files named in include rules
all the other developers need to be notified when the common included config spec file changes (there is no native notification included in ClearCase)
If you need to have one "environment" (i.e. one "view" or workspace) with a variable content (depending on a different branch), you need to define a symbolic link (or a windows subst) pointing to different views (each with their own config spec)
That way, you only have to change the link (or the path subst'ed) in order to change the config spec associated with a given fixed path.
It's been a while since I worked in ClearCase (we switched to Subversion), but if I recall correctly there is no way to do this native to ClearCase.
You could use or write a script generator that would create your spec file and then include that in the actual spec:
element * CHECKEDOUT
include scripted_file_output
Then run
cleartool setcs -current
The problem with this approach is that I believe the include spec would need to be regenerated and the cleartool setcs run whenever you change the value of MY_BRANCH.