I'd like to get answer to this question on snowflake training "You created the schema called VEGGIES but when you run the SHOW SCHEMAS command (see above) it does not appear. Assuming your current worksheet role has access to the schema, what options below would make the schema appear in the results?" Selections are below, and select all that apply.
Change your default role to SYSADMIN (and run again).
Set the worksheet database drop menu to GARDEN_PLANTS (and run again).
Set the worksheet warehouse drop menu to VEGGIES_WH (and run again).
Add "all" to the show schemas command (and run again).
Add "in account" to the show schemas command (and run again).
Add "where schema = 'VEGGIES' " to the show schemas command (and run again).
Thanks!
Hint is to reference to the photo above the question. Remember that you are currently in SYSADMIN role and notice the selected database applied.
Apply what has been selected to your own worksheet. Test the answer choices one by one and you'll notice some answer choices aren't real steps to take. The question wasn't necessarily hard, but I also spend some time on this b/c I didn't digest the question/answer choices slowly and carefully.
Check the 2nd and 5th checkboxes:
Related
I'm using DBeaver 5.2.5.201811181655 with IBM DB2/400 v7r3.
I'm trying to see a schema called WRKCERTO, but Database Navigator will not show it. The schema is there and I have rights to it, and I'm able to run SQL scripts with its objects, such as SELECT * FROM WRKCERTO.DAILYT and it works.
To make matters stranger, when WRKCERTO is the only schema in the filters, the contents of a schema which I cannot identify are shown under the connection as if the connection is their parent. It doesn't show any schema as a node in the tree between the connection & Tables, Views, etc. The tables are familiar, but I cannot determine their exact schema, and as such also cannot query any of them because DBeaver doesn't know what schema to use.
The behavior of the Projects window is the same.
If I connect with SquirrelSQL 3.8.1 everything looks ok. I can see WRKCERTO along with all my other schemas as if nothing is different.
The screenshot below shows the issue. The schema I use most is F_CERTOB, which is visible under the connection ASP7, which currently has two schema filters: F_CERTOB and WRKCERTO. But as shown, WRKCERTO...isn't.
The connection TEST is an exact copy of ASP7, but its only filter is WRKCERTO. And as mentioned above, the items under the connection name cannot be identified.
I've gone through the DBeaver settings, but I cannot find any way to change this behavior. AND...this is the first time I've tried to use WRKCERTO. I tried to access it for the first time only a couple days ago, so it seems unlikely there are bad bits of information about it floating around in my system, or in DBeaver.
What information can I provide to help diagnose this issue...?
Please check below url.Similar issue mentioned with some solution.
You may also want to try this and let me know if it works or not.
https://dbeaver.io/forum/viewtopic.php?f=2&t=911
Is there a provision to store user entered comment during modification to the “Model” which can be shown in the “Audit View” along with “Original” and “CHANGE” columns of EA.
Can we add a comment column next to the Change column in Audit View of EA, where user entered comment can be stored. Please suggest the EA API to do the same.
You can not easily do that. You might modify the underlying database and add columns to existing tables (or even add your private tables). But that would break XMI export as these columns would not be ex-/imported and you're on your own to maintain this. An alternative is to use tagged values in general cases. But here I doubt it's feasible. So probably your own table with foreign key referring the audit would be the choice. However, it merely sound like you're trying to re-build a check-in mechanism. FWIW: in practice I found this mechanism counter-productive as people tend to comment either nothing or trivialities. So that it hinders more than it helps.
You can not modify the standard dialogs (e.g. fo the shown audit view). That means you have to write an add-in to create your own dialog.
The table that contains the audit is t_snapshot.
Using Visual Studio Enterprise 2015
I would like to use schema compare to update a bunch of table changes from a test environment to my local one.
I'm getting the error:
Rows were detected. The schema update is terminating because data loss
might occur.
So this is saying I have data in the tables I want to update and I could lose data if I made the table changes. But I'm going to do a data compare afterward the get the updated data as well. How can I override the above error and force the changes? Or do I have to just truncate the tables with data in them first?
Thank you in advance
I found the answer in the settings.
Click on the options Cog wheel that's next to the compare and update buttons.
Next click on the General tab and then uncheck "Block on possible data loss"
Hope this helps someone in the future.
I have searched Google, BOL, and several forums and can't find the answer:
I have a very small data base application that I write some queries and SPs to extract data. A few days ago I opened an exsiting SP to find that something had added code similar to that below, sometimes multiple lines referring to every table in the database. When I set up a new simple SP like "Select * from TinyTable" and re-open it, the same code has been inserted.
The last thing I remember doing was reviewing the settings for results to grid in SSMS 2008 R2. I'm afraid I may have accidently changed a setting but I've spent hours reviewing them and can't identify what it might be.
I have considered reinstalling SSMS to set back to defaults but I have a linked server set up to solve a collation conflict, and don't want to cause problems with that. If anyone can point me in the right direction I'd appreciate it. I may be searching using the wrong terminology but can find nothing. As I say, I don't know for sure a change to the SSMS tools options is the problem but I suspect it could be something I have done.
Here's a sample of what gets automatically inserted at the bottom of every one of my procs:
GO
ALTER TABLE [dbo].[tblLot] WITH CHECK ADD CONSTRAINT [FK_tblLot_tblLocation] FOREIGN KEY([LocID])
REFERENCES [dbo].[tblLocation] ([LocID])
You likely have Tools > Options > SQL Server Object Explorer > Scripting > Object Scripting Options > Generate script for dependent objects set to True. Try changing the value to false.
I'm fairly new to using the Birt Report Designer and need to figure out how to generate a report from a SQLite database. I have suceeded in getting it to connect to the DB but am now unsure how to generate a report and the tutorials that I have found aren't of much help so far.
I have a template that was given to me by my employer that has a few fields, I'm wondering if these fieldnames (in the template) are supposed to match field names in the DB.
Also, when I go to Run->View Report-> As PDF I am unsure what I am supposed to enter for the field "User Key", does this correspond to a table name in the DB or something along these lines?
As of now, I have tried entering a table name but just a blank report is generated.
If anyone can point me to a good resource or help with this I would greatly appreciate it. Thanks
There are two books i could really advice:
BIRT - A Field Guide to Reporting
Integrating and Extending BIRT
and the Eclipse Help containing BIRT documentation.
I suppose the User Key could be report parameter (listed in Data Explorer window), which is passed to Data Set to select appropriate data. If I'm guessing right, check within a Data Set editor ("Parameters" tab and "Query" tab) where the User Key parameter goes in - probably to one of the table field in a WHERE clause. Parameters in a query are represented by question marks: SELECT * FROM fooTable WHERE barColumn = ?. Hope tracking this would lead to find out, what to enter to the parameter.
Additionally, ensure if your Data Set(s) is(are) connected correctly to your SQLite Data Source ("Data Source" tab in a Data Set editor).
Being as new as you are to BIRT, I would suggest building a couple of reports with the sample DB (Classic Models). There are many, many samples out there for you to use as a guide. Additionally, most tutorials will use the Classic Models data so you can follow right along. After you create a couple of practice reports (this should not take more than 30-45 minutes) the template you have been given will likely make A LOT more sense and allow you to make progress almost immediately.
If you are looking for a nice collection of tutorials and samples, be sure to check out Birt Exchange for Dev Share (samples) & tutorials.
As for the "User Key" this is almost certainly a report-level parameter used to filter the data set (as the previous answer points out).
Good Luck!