Using "replace all" I have selected 17 changes and they are shown in green on the sidebar. But how can I "confirm" those changes? I tried Option-Enter but it just re-does the changes in the sidebar and not in the actual files.
Notice below that the changes are not applied to the file itself yet. And I do not know how to do so.
It appears to be a matter of a broken/non-functioning shortcut in vscode.
Here is the shortcut to "replace all":
It does NOT work: does nothing. but if I click on the little icon then this happens:
And then hitting Replace gets the job done
Related
Usually in Visual Studio Code, if I want to delete or modify a certain word from my file, I can highlight one of the words and then continuously press CTRL+D to highlight the rest of that same word in the file. But, in CLion, I am unable to find the equivalent shortcut.
I've Googled and searched here on StackOverflow but no luck. Maybe this shortcut doesn't exist in CLion? Can anyone confirm?
EDIT: It's also known as "Select next occurence" in other JetBrains products.
EDIT: The answer is ALT+J
it is alt+j in all of jetbrains products
So I just want to hit on a couple of options that you have, because I work with both CLion & VSCode as well, and needed the same exact keybinding in CLion.
KEYBINDING FUNCTIONALITY SEMANTICS
Unfortunately, it appears that no one cares about standardizing semantics when it comes to editor functionality/features, and keybindings. It can make moving from one editor to the next difficult, and flat out something many people just would rather not have to do.
Please Note:
_I am no expert on JetBrains IDE's, I am somewhat of an expert with VSCode though. I say this because, IDK how much JetBrains IDE's vary from one to the next, however, from having CLion, IntelliJ, and Access to Ryder I can tell you that in the standard IDE's the keymappings seem near Identical, but in Ryder, the keybindings are totally different.
DEV ENVIRONMENT
BOUND-KEYS (dev env's default)
SEMANTICS
CLion
ALT+J
"Add Selection for Next Occurrence"
Visual Studio Code
CTRL+D
"editor.action.addSelectionToNextFindMatch"
Visual Studio 2022 (IDE)
SHIFT+ALT+.
"Edit.insertNextMatchingCaret"
the The correct semantics for referring to the functionality you seek in CLion is contingent on the environment that its being implemented in. The following demonstrates how to correctly reference it in both JetBrains & Visual Studio Environments:
Add Selection To Next Find Match Ctrl+D editor.action.addSelectionToNextFindMatch
Once you know the semantics of the functionality that you want to customize, you no longer have to resort to using any editors default key mapping. You asked about, CLion, so I will demonstrate, in an image (or screenshot) below, how you can change the keybinding to be anything you want it to be.
To get to the window you see in the photo navigate by following the steps below.
Starting from the text editor, find the word 'FILE' on the 'MENUBAR' located at the very top of your screen.
Click on 'FILE' to drop open the 'FILE MENU'.
Scan through the __FILE MENU'_s ITEMS, until you see the selectable ITEM named 'SETTINGS' (it will have a wrench icon next to it).
4 Select 'SETTINGS' by left-clicking it, and you'll open the 'SETTINGS MENU' open.
Another 'LIST' will appear on the left side. There will be 'BOLD ITEMS' and regular weighted SUB ITEMS. Find the 'BOLD ITEM' that reads 'KEYMAP'.
Select 'KEYMAP'.
The image above shows the view in my IDE of the keymap menu. You can see a red arrow, as well as a green arrow, in the image.
GREEN ARROW
The green arrow shows where you can change the entire Keymap, as you can see in the image, mine is set to VSCode, and as far as I can tell, every keybinding is the same as in VSCode. You do have to download the VSCode keymap plugin though.
RED ARROW
The red arrow shows where the "Bound Keys" are listed. Right click on the keybinding and you'll see a menu that reads
Add Mouse Shortcut
Add Keyboard Shortcut
Add Abbreviation
"it may also have options for removing keybindings and mouse shortcuts, it all depends on how the keybinding you click on is configured"
To set the keybinding select Add Keyboard shortcut, and set it to what ever you want.
Sometimes when closing vscode, or a tab therein, I get a dialogue asking "Do you want to save the changes you made to filename?" However, the unsaved edits are actually from a previous session that was closed without such a query, probably when turning off the computer, so I can't remember if it was meaningful edits, or maybe just an accidental key-press, like a shortcut gone wrong; and doing undo to revisit the last edits doesn't work either.
My question: How can I see the diff between the saved version of a file, and the version in the editor window? I think it would be nicest just to have a "show diff" option in the dialogue, but for now I'm also happy with a command line diff command.
I'm using ubuntu 20.04.
I'm using VSCode version 1.52.1 on MacOS and I had a similar problem that may not be the same problem, but I'm guessing it will work for you as well.
When you're in the Explorer view, in the upper left part of Explorer you have your "Open Editors." If that shows a dot to the left indicating that the buffer has changes in it, you can right click the file name and select "Compare with Saved." This will open another buffer to the side that will show you any unsaved changes.
To get rid of that window (it took me a bit to figure this out I'm sorry to say!), you can click the 'X' to the left of the extra buffer in "Open Editors."
Hope this works for you!
A few bright notes for the keyboard players out there:
The command you are asking about has a default shortcut. Unless you've applied a keyboard map extension, the Ctrl+Kd arpeggio opens the very same diff view between the active and saved versions of the current file. The default shortcut to close an editor tab (be it the diff or a file or anything at all) is Ctrl+W.
The command, like any command in VSCode, is also accessible via the Ctrl+Shift+P command dropdown (on Linux, F1 opens it too). Start typing e.g. compa sav (it saves your keyboard wear and tear to shorten words to a prefix which is unambiguous enough), and the list will shrink dynamically to just a few commands. Yours is File: Compare Active File with Saved. When it's close to the top enough, navigate the list of commands with the down arrow and execute it with Enter. As a bonus, you may click on the little gear to the right of the command currently highlighted in the list and redefine its shortcut, if you use it very often and prefer a chord shortcut to the default arpeggio one. Sorry, there does not seem to be a shortcut in lieu of the gear click. If there is, please let me know!
But if you really, really want to right-click on the filename in the Open Editors view of the Explorer sidebar, you can open that view directly with, you guessed it, a shortcut: Ctrl+Ke. And if you change your mind on a dime right at this moment, or realize that you in fact never had a mouse to do the right-click in the first place, use Shift+F10 to drop down the "right-click menu", properly called the context menu, which you navigate with arrows and execute with Enter (that's kinda a common theme, as you probably noticed). This works mostly anywhere the right-click does.
While in the Open Editors view, to switch to an editor file tab, move the selection to the desired file. Press Space to bring the file into view but stay in the Open Editors view, or Enter to bring the file into view and shift the keyboard focus to it. Pressing Ctrl+Shift+E brings focus back to the editor from any view in the Explorer sidebar. The same shortcut moves focus to the Explorer sidebar from the editor.
Happy ♬ k'boarding ♬!
ctrl+shift+P (or command+shift+P on mac) and fuzzy search for "compare changes with saved files"
When I press CTRL+. for quick fixes or the click the light bulb (show fixes) I get the dialog in the below image. However, when I press enter or click an item in the quick fixes dialog no code is added to my document i.e. nothing happens.
Does anyone know how to fix this? In the given example, I'd expect selecting "Open System" to add the line "open System" at the top of the document.
Environment:
Windows 10
Visual Studio Code 1.46.1
Ionide-fsharp 4.14.0
Recently, in one of my Visual Studio Code instances, now there is a green "play" button that allows me to Run Python File in Terminal.
You can see that button in the picture below, just between the "open changes" and the "split editor" buttons.
I have Visual Studio code installed in other computers, and there is no such button. I would like to show that button since it comes very handy, but I do not know how to make that happen, and I cannot find any documentation.
Note: I'm not using any extension for running files
The 'Play' button feature is in testing at the moment, and so is only available to those in the experiment group.
https://github.com/microsoft/vscode-python/issues/5321
Having said that, I had the button appear yesterday part way through a session.
Unfortunately, today the button is no longer present, and I am not part of the experiment group.
Install Code Runner simple by press (Ctrl+shift+X) and search for "Code Runner",it works for almost all languages including python. it gives you a button and shortcut Ctrl+Alt+N.
This area is called "Editor Actions". It's now available by default but unfortunately cannot be hidden unless you modify stylesheet:
https://github.com/Microsoft/vscode/issues/46403
Eclipse has something like this showing you the outlines of method declarations, imports, variables...
Is there something similar in Visual Studio 2010? I can't seem to find it.
Another thing is the context menu dropdowns.
In Visual Studio, I have to click on the underlined word:
And wait for that little blue underscore to pop up then I have to carefully hover over it like so:
for the drop down menu to pop up. Then I have to click on it to bring up the options.
In Eclipse I can hover over the underlined word and get the options about half a sec later OR hover over it and press F2 immediately to get the options.
Does anyone know if such features are available in VS2010?
For your first question, there is a window called "Class View" that may be similar to what you want. You can access it via CtrlWC.
For your second question, if your cursor is on the identifier that is underlined, you can type either of the following in order to open that same context menu:
Ctrl. (that's a period or dot)
AltShiftF10