when i try to do an ordinary yocto-quick-build (qemu, core-image-minimal), with
dunfell release and the following settings in the local.conf:
INHERIT += "archiver"
ARCHIVER_MODE[src] = "configured"`
I get the following Error message:
ERROR: core-image-minimal-1.0-r0 do_rootfs:The file /usr/lib/x86_64-poky-linux/9.3.0
/crtprec32.o is installed by both libgcc and ibgcc-initial, aborting
Does anyone have a solution or workaround for this issue ?
Related
I'm trying to add a neovim plugin that doesn't exist in nixpkgs yet (modes.nvim), but having trouble getting it to work.
I'm using NixOS 22.05, and Home Manager, and I am using the following to build this plugin:
pkgs.vimUtils.buildVimPlugin {
name = "modes-nvim";
src = pkgs.fetchFromGitHub {
owner = "mvllow";
repo = "modes.nvim";
rev = "3188692abf02a8838ec75e59d68c2ce3e4323f5c";
sha256 = "sha256-2QDpwQ9+F5t5gTR1KLVzRrvriwo5JUHatZEJnc0ojV8=";
};
}
Initially, I used lib.pkgs.fakeSha256 to get a "mismatched hash" error, and copy/pasted the has from that error message, so I think it's correct, though other things I've seen on the internet seem to have the SHA256 as a hex string, so not sure what's going on there.
When I run home-manager switch, I get the following error:
these 12 derivations will be built:
/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv
/nix/store/mnj1d881d8s57yj3y8wjy7i9nl3m089f-vimplugin-modes-nvim.drv
/nix/store/5l8vqvx2bbawkkj92s8qd0p5hw16pcmq-vim-pack-dir.drv
/nix/store/jgqf68sd50s79pydzs9154p509l5109v-hm_nviminit.vim.drv
/nix/store/rq8f75qr9ahrfr0hvp51inn19088bz5p-manifest.vim.drv
/nix/store/hbzm2xr6nv8mr2l9nrlf742fqdmw9nv3-neovim-0.7.2.drv
/nix/store/zks47ifk7njz1s8y7hvq357ac8z6azkd-neovim-0.7.2-fish-completions.drv
/nix/store/rkaa094vvyjcyy4v1zkh4f8xz64vqxas-cameron-fish-completions.drv
/nix/store/0073403x9b4wv13gm7a6bqy4765pi8g5-home-manager-files.drv
/nix/store/lxwpbhb6ryhwrff4cjyniff11843cf9x-home-manager-path.drv
/nix/store/xbbn44253wjh90md4hqrrc2wfpafkc55-activation-script.drv
/nix/store/ijwmv897xc2wlr1ij4a30vk4z154ikbf-home-manager-generation.drv
building '/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv'...
Sourcing vim-command-check-hook.sh
Using vimCommandCheckHook
Sourcing vim-gen-doc-hook
unpacking sources
unpacking source archive /nix/store/fcxyif8piqar9w9ynmi6ym71hw6zsy7a-source
source root is source
patching sources
configuring
no configure script, doing nothing
building
build flags: SHELL=/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash
test -r dependencies/pack/vendor/start/plenary.nvim || git clone --depth=1 https://github.com/nvim-lua/plenary.nvim.git dependencies/pack/vendor/start/plenary.nvim
/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash: line 1: git: command not found
make: *** [Makefile:7: install_dependencies] Error 127
error: builder for '/nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv' failed with exit code 2;
last 10 log lines:
> unpacking source archive /nix/store/fcxyif8piqar9w9ynmi6ym71hw6zsy7a-source
> source root is source
> patching sources
> configuring
> no configure script, doing nothing
> building
> build flags: SHELL=/nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash
> test -r dependencies/pack/vendor/start/plenary.nvim || git clone --depth=1 https://github.com/nvim-lua/plenary.nvim.git dependencies/pack/vendor/start/plenary.nvim
> /nix/store/iffl6dlplhv22i2xy7n1w51a5r631kmi-bash-5.1-p16/bin/bash: line 1: git: command not found
> make: *** [Makefile:7: install_dependencies] Error 127
For full logs, run 'nix log /nix/store/pna2lzjc3q56z59b2kfazzxi8m6swp8d-vimplugin-modes-nvim.drv'.
error: 1 dependencies of derivation '/nix/store/mnj1d881d8s57yj3y8wjy7i9nl3m089f-vimplugin-modes-nvim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/5l8vqvx2bbawkkj92s8qd0p5hw16pcmq-vim-pack-dir.drv' failed to build
error: 1 dependencies of derivation '/nix/store/jgqf68sd50s79pydzs9154p509l5109v-hm_nviminit.vim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/rq8f75qr9ahrfr0hvp51inn19088bz5p-manifest.vim.drv' failed to build
error: 1 dependencies of derivation '/nix/store/0073403x9b4wv13gm7a6bqy4765pi8g5-home-manager-files.drv' failed to build
error: 1 dependencies of derivation '/nix/store/hbzm2xr6nv8mr2l9nrlf742fqdmw9nv3-neovim-0.7.2.drv' failed to build
error: 1 dependencies of derivation '/nix/store/ijwmv897xc2wlr1ij4a30vk4z154ikbf-home-manager-generation.drv' failed to build
It appears to be failing due to git not being found. Of course, I have git installed for me, but perhaps this command is being run in an environment that doesn't have access to my installed packages.
I'm very new to Nix and NixOS, so I'm not really sure how to begin fixing this issue. I've searched online for answers, but haven't found anything about this issue. Any advice is much appreciated.
I am facing "Taskhash mismatch" & "The metadata is not deterministic and this needs to be fixed" error in Yocto project build. This issue arises without any obvious reasons. With a perfectly good source code repo, the build is success sometime, while it fails some time. There is no change in source code/recipe or any other build parameters.
Error log:
ERROR: When reparsing /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb:do_populate_lic, the basehash value changed from e0bfa2ad64f24d189d23f9d84918c74a7253e0d7e9c7fea4e3346cbc473d43da to c108c533ec82c43aa15730e4ca9c9838f87133e63417f40af0de8ca8cb43f51a. The metadata is not deterministic and this needs to be fixed.
ERROR: The following commands may help:
ERROR: $ bitbake sub_project-rootfs-base -cdo_populate_lic -Snone
ERROR: Then:
ERROR: $ bitbake sub_project-rootfs-base -cdo_populate_lic -Sprintdiff
ERROR: sub_project-rootfs-base-1.0+gitAUTOINC+db239d9f5b-r2 do_package_qa: Taskhash mismatch 87d8616452c2be01481a9034e9147f0270a57a3f64f85cde65076863b8123c7c versus 9a7fd3b27e62140001d77ab75dbc2026dac8e6c8ca93a487b1857a76f2b6b2yy for /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb:do_package_qa
ERROR: Taskhash mismatch 87d8616452c2be01481a9034e9147f0270a57a3f64f85cde65076863b8123c7c versus 9a7fd3b27e62140001d77ab75dbc2026dac8e6c8ca93a487b1857a76f2b6b2yy for /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb:do_package_qa
ERROR: sub_project-rootfs-base-1.0+gitAUTOINC+db239d9f5b-r2 do_package_write_rpm: Taskhash mismatch 9a7fd3b27e62140001d77ab75dbc2026dac88qc8ca93a487b1857a76f2b6b2yy versus 9a7fd3b27e6217l0001d77ab75dbc2026dac8e6c8ca93a487b1857a76f2b6b2yy for /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb:do_package_write_rpm
ERROR: Taskhash mismatch 9a7fd3b27e62140001d77ab75dbc2026dac88qc8ca93a487b1857a76f2b6b2yy versus 9a7fd3b27e6217l0001d77ab75dbc2026dac8e6c8ca93a487b1857a76f2b6b2yy for /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb:do_package_write_rpm
I resolved this issue by doing two of the following action.
Clean the recipe which throws error during build using following command
bitbake -c cleansstate sub_project-rootfs-base
Update the bb file timestamp by doing empty write or by touching file.
Open the bb file using your editor - vim /home/user/my_project/yocto/sub_project-yocto/meta-subproject/meta-base/recipes-core/sub_project-rootfs-base/sub_project-rootfs-base.bb
Write the file by clicking save button or in vim writing ":w" command
Close the file using "x" button or ":q" command.
Rebuild the project as usual.
Edit : In case there are multiple bitbake recipes showing this error, you can touch all bb files and build again. Go into your yocto folder and run following command. This will take some to touch all file and significantly higher time to rebuild the project.
find . -type f -name "*.bb" -exec touch {} +
I want to setup a private tangle on my own virtual machine with Ubuntu 18.04, 4GB RAM and 20GB memory.
I have follow this instructions: https://docs.iota.org/docs/compass/0.1/how-to-guides/set-up-a-private-tangle. Every command works fine until reach this one: bazel run //docker:layers_calculator.
It shows an error as follows:
Starting local Bazel server and connecting to it...
ERROR: /home/istabraq/compass/third-party/maven_deps.bzl:3:5: Traceback (most recent call last):
File "/home/istabraq/compass/WORKSPACE", line 42
maven_jars()
File "/home/istabraq/compass/third-party/maven_deps.bzl", line 3, in maven_jars
native.maven_jar(<4 more arguments>)
type 'struct' has no method maven_jar()
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
ERROR: error loading package '': Encountered error while reading extension file 'protobuf_deps.bzl': no such package '#com_google_protobuf_deps//': error loading package 'external': Could not load //external package
INFO: Elapsed time: 4.743s
INFO: 0 processes.
FAILED: Build did NOT complete successfully (0 packages loaded)
FAILED: Build did NOT complete successfully (0 packages loaded)
How can I solve this problem? what I have missed?
read carefully the message given after running bazel installer:
Make sure you have "/home/yourusername/bin" in your path. You can also activate bash completion by adding the following line to your :
source /home/yourusername/.bazel/bin/bazel-complete.bash
You can check with: "bazel info" or "bazel version"
Unfortunately, there are further errors:
https://github.com/iotaledger/compass/issues/142
I have solve this issue by using this commands:
Step 3: Set up your environment
If you ran the Bazel installer with the --user flag as above, the Bazel executable is installed in your $HOME/bin directory. It’s a good idea to add this directory to your default paths, as follows:
export PATH="$PATH:$HOME/bin"
You can also add this command to your ~/.bashrc or ~/.zshrc file to make it permanent.
reference:
https://docs.bazel.build/versions/master/install-ubuntu.html
I have imported my project in svn when I did a checkout and ran the app I got this error I am using sailsjs-0.10.5. I think it is to do with the grunt I am not able to find any solution it works fine in mac not in linux I set the permissin to 0777 even though it is not working here is the error.
verbose: Grunt :: Loading "Gruntfile.js" tasks...
verbose: Grunt :: ERROR
verbose: Grunt :: >> TypeError: Property '.svn' of object # is not a function
verbose: Grunt :: Warning: Task "default" not found.
error: ** Grunt :: An error occurred. **
error:
Aborted due to warnings.
Loading "Gruntfile.js" tasks...ERROR
TypeError: Property '.svn' of object # is not a function
Warning: Task "default" not found.
error: Looks like a Grunt error occurred--
error: Please fix it, then restart Sails to continue running tasks (e.g. watching for changes in assets)
error: Or if you're stuck, check out the troubleshooting tips below.
error: Troubleshooting tips:
error:
error: *-> Are "grunt" and related grunt task modules installed locally? Run npm install if you're not sure.
error:
error: *-> You might have a malformed LESS, SASS, CoffeeScript file, etc.
error:
error: *-> Or maybe you don't have permissions to access the .tmp directory?
error: e.g., /var/hosts/chating_room/.tmp ?
error:
error: If you think this might be the case, try running:
error: sudo chown -R YOUR_COMPUTER_USER_NAME /var/hosts/chating_room/.tmp
Make changes to Gruntfile.js, find loadTasks function, add excludeDirs : /^\.(git|svn)$/:
Original:
function loadTasks(relPath) {
return includeAll({
dirname: require('path').resolve(__dirname, relPath),
filter: /(.+)\.js$/
}) || {};
}
After:
function loadTasks(relPath) {
return includeAll({
dirname: require('path').resolve(__dirname, relPath),
filter: /(.+)\.js$/,
excludeDirs : /^\.(git|svn)$/
}) || {};
}
I have a same problem.
FIXED by
Simply deleting .svn folder from
1) task/.svn,
2) config/.svn &
3) register/.svn
I'm trying to integrate into my buildbot process the feature to suppress specific compilation warnings.
Here what I did:
1) created the file with the warning exections, sample line below:
deps/include/linux/sofia-sip-1.12/sofia-sip/su_tag.h : .*
2) added to the Compile Step the following:
suppressionFile= <path_to> + "/buildbot-warnings-exceptions",
here the full buildstep for a better reference:
build_4_core = Compile (
command = ["make", "-j4"],
warnOnWarnings = True,
haltOnFailure = True,
workdir = nr.vdk20_build_root,
suppressionFile= nr.vdk20_build_root + "/buildbot-warnings-exceptions",
name = "make_j4" )
3) restarted the buildmaster
Unfortunately it seems the warning are not filtered out :(
As an example, here the warning line, still present in the compile step logs and warnings list:
deps/include/linux/sofia-sip-1.12/sofia-sip/su_tag.h:206:25: warning:
unused parameter ‘p’ [-Wunused-parameter]
Tried several tweek of the file content but with no luck
What I'm I doing wrong?
Just to complete the picture:
Buildmaster: running on a gentoo server 64bit
Buildbot version: 0.8.8
Twisted version: 12.3.0
Buildslave : running on a Ubuntu 12.04 64bit
Buildslave version: 0.8.5
Twisted version: 11.1.0